SOLICITATION NOTICE
66 -- Pulsed IV system, Pulsed IV System Head, training, and installation
- Notice Date
- 3/5/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334515
— Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Contracting Office
- RDECOM Contracting Center - Adelphi (RDECOM-CC), ATTN: AMSRD-ACC, 2800 Powder Mill Road, Adelphi, MD 20783-1197
- ZIP Code
- 20783-1197
- Solicitation Number
- W911QX10R0006
- Response Due
- 3/17/2010
- Archive Date
- 5/16/2010
- Point of Contact
- Andrew Ordway, 301-394-2029
- E-Mail Address
-
RDECOM Contracting Center - Adelphi (RDECOM-CC)
(andrew.ordway@arl.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. SYNOPSIS SOLICITATION FOR COMMERCIAL ITEMS 1. Class Code: 66 2. NAICS Code: 334515 3. Subject: Pulsed IV System, Pulsed IV System Head, Installation and Training 4. Solicitation Number: W911QX-10-R-0006 5. Set-Aside Code: N/A 6. Response Date: 03/17/2010 12:00pm 7. Place of Performance: US Army Research, Development and Engineering Command Acquisition Center, Adelphi Contracting Division 2800 Powder Mill Road Adelphi, MD 20783 USA 8. (i)This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii)The solicitation number is W911QX-10-R-0006. This acquisition is issued as an Request for Quote (RFQ). This acquisition will be a firm fixed price type contract. (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-38. (iv) The associated NAICS code is 334515. The small business size standard is 500. The SIC code is 3825. (v)The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): CLIN #, DESCRIPTION, QTY, UNITS CLIN0001, Pulsed IV System, 1, Each CLIN0002, Pulsed IV System Pulsed Head, 1, Each CLIN0003, Shipping, Installation and Training, 1, Each (vi) Description of requirements: C.1 Scope. The Contractor shall provide one (1) Pulsed Current Voltage Test System to include the shipping, installation and on-site training. C.2 Requirements C.2.1 The Contractor shall provide one (1) Pulse Current Voltage Test System for testing field effect transistors that meets the following requirements: *The Contractor shall ensure the system supplies a fixed bias between zero (0) and 200 volts (V) direct current (DC) from drain to source of a transistor for testing. The Contractor shall ensure the system also supplies a fixed bias between -10 and +4 V DC from gate to source of the transistor. *The Contractor shall ensure the referenced integrated system has the ability to pulse current from any fixed bias point in the previously mentioned ranges on both drain- source and gate-source simultaneously. *The Contractor shall ensure the pulsed current reaches a maximum of 1.5 amps (A) from drain to source with a minimum pulse width of 200 nanoseconds (ns). *The Contractor shall ensure the pulsed bias source across the transistor gate to source has the capability to pulse from -10 V to 4 V in 200 ns. *The Contractor shall ensure the pulse width has a maximum of 1 millisecond (ms). *The Contractor shall ensure the referenced integrated system has the ability to supply a maximum of 200 watts between drain and source. *The Contractor shall supply precision calibration standards for the system. *The Contractor shall ensure the referenced integrated systems duty cycle is 1% to 100%. *The Contractor shall ensure the system comes with a controller and the software to run the controller. The Contractor shall ensure the system does not occupy a space greater than four (4) feet by four (4) feet by six (6) feet. C.2.2 Shipping, On-Site installation, Training: *The Contractor shall ship, install, calibrate and perform verification test to ensure full functionality of the Pulsed Current-Voltage Test System in the Electronics Technology Branch, Sensors and Electron Devices Directorate of the Army Research Laboratory, (mailstop RDRL-SER-E), within 14 weeks of contract award. *The Contractor shall provide a minimum two (2) day on-site training of the system, including system operation and calibration, coincident with installation. The on-site training shall be held during the integrated systems installation. *The Contractor shall provide an instruction manual in paper format, as well as either cd or dvd format before departing from the two (2) day training session. (vii) Delivery is required by 06/03/2010_. Delivery shall be made to _the Army Research Lab, 2800 Powder Mill Road, Adelphi, MD 20783. Acceptance shall be performed at Army Research Lab, 2800 Powder Mill Road, Adelphi, MD 20783. The FOB point is destination. (viii) The provision at 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The following addenda have been attached to this provision: NONE. (ix) The provision at FAR 52.212-2, Evaluation - Commercial Items: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical, Past Performance and Price. The Technical element of the evaluation will be a determination as to whether the proposed product meets the performance characteristics and specifications in the solicitation. The Technical element of the evaluation shall be based solely on information furnished by the vendor. The Government is not responsible for locating or securing any information, which is not identified in the proposal. To ensure sufficient information is available, vendors must furnish as part of their proposal all descriptive material (such as cuts, illustrations, drawings, or other information) necessary for the Government to determine whether the product meets the performance characteristics and specifications of the requirement. If the offeror proposes to modify a product so as to conform to the requirement of this solicitation, the offeror shall include a clear description of such proposed modifications and clearly mark any descriptive materials to show modifications. Past performance will be evaluated based on information provided by the offeror as to actual sales of the proposed product to industry or Government agencies. Past performance will consider the ability of the offeror to meet technical specifications, delivery schedules (with warranty fulfillment and maintenance reputation included as applicable). Offerors shall include four (4) records of sales from the previous twelve (12) months. Offerors shall identify a point of contact for each sale by providing a name and telephone number. Price will be evaluated based on the total proposed price, including options, (if any).Technical and past performance are of equal importance and when combined are significantly more important than price. The Government reserves the right to award to other than the lowest price and to award without discussions. (x) Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items, and DFARS 252.212-7000, Offeror Representations and Certifications -Commercial Items, with its offer. (xi) The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this clause NONE. (xii)The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, applies to this acquisition. The following additional FAR/DFARS clauses cited in this clause are applicable: 52.203-3, 52.203-6, 52.203-6 Alternate 1, 52.219-4, 52.219-8, 52.219-23, 52.219-25, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-39, 52.225-3, 52.225-13, 52.232-29, 52.232-33, 252.225-7001, 252.225-7012, 252.225-7014, 252.227-7015, 252.227-7037, 252.232-7003, 252.243-7002, 252.247-7023 (xiii)The following additional contract requirement(s) or terms and conditions apply: The below listed local clauses apply to this solicitation. The full text of the clauses can be provided upon request and are not provided in this document due to posting document size limitations. Requests can be made to andrew.ordway@arl.army.mil : 52.004-4409 RDECOMCC POINT OF CONTACT, 52.016-4407 TYPE OF CONTRACT, 52.046-4400 GOVERNMENT INSPECTION AND ACCEPTANCE, 52.032-4418 TAX EXEMPTION CERTIFICATE, 52.032-4431 WIDE AREA WORKFLOR (WAWF) PAYMENT INSTRUCTIONS, 52.005-4401 RELEASE OF INFORMATION BY MANUFACTURERS, RESEARCH ORGANIZATIONS, EDUCATIONAL INSTITUTIONS, AND OTHER COMMERCIAL ENTITIES HOLDING ARMY CONTRACTS, 52.011-4401 RECEIVING ROOM REQUIREMENT ALC, (xiv) This acquisition is rated under the Defense Priorities and Allocations System (DPAS) as N/A. (xv) The following notes apply to this announcement: N/A. (xvi) Offers are due on 03/17/2010, by 12:00 pm, at either andrew.ordway@arl.army.mil, Fax# 301-394-3184, mailed to the address in section (7) above with the addition of ATTN: Andrew Ordway, or through the ASFI website posting for this combination synopsis/solicitation. (xvii) For information regarding this solicitation, please contact Andrew Ordway, Phone: 301-394-2029, email: andrew.ordway@arl.army.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/f18fae9fc5c1dec0ddc33468393a96c2)
- Place of Performance
- Address: RDECOM Contracting Center - Adelphi (RDECOM-CC) ATTN: AMSRD-ACC, 2800 Powder Mill Road Adelphi MD
- Zip Code: 20783-1197
- Zip Code: 20783-1197
- Record
- SN02085102-W 20100307/100306000427-f18fae9fc5c1dec0ddc33468393a96c2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |