SOLICITATION NOTICE
K -- SALE OF FEDERAL SURPLUS SCRAP PROPERTY - ORIGINAL COST $1,144,813.75 - BID FORM
- Notice Date
- 2/3/2010
- Notice Type
- Sale of Surplus Property
- NAICS
- 332710
— Machine Shops
- Contracting Office
- Defense Contract Management Agency, Defense Contract Management Agency, DCMA Louisiana/East Texas, c/o Michoud Assembly Facility, 13800 Old Gentilly Road, Building 350, New Orleans, Louisiana, 70189-0283
- ZIP Code
- 70189-0283
- Solicitation Number
- 3059-S0107A
- Archive Date
- 3/20/2010
- Point of Contact
- Delorese Kay Koller, Phone: (407)228-5260, Property Manager, Phone: (423)578-6125
- E-Mail Address
-
Kay.Koller@dcma.mil, becky.sensabaugh@baesystems.com
(Kay.Koller@dcma.mil, becky.sensabaugh@baesystems.com)
- Small Business Set-Aside
- N/A
- Description
- TERMS AND CONDITIONS OF SALE BID FORM BAE Systems, 4509 W. Stone Drive, Kingsport, TN 37660 is offering for sale by sealed bid a variety of Federal Surplus Property in Formal Scrap Sale 3059-S0107A. This is your invitation to Bid. It contains descriptions of the property by lot number. Sale Terms and Conditions and a Bid Form are also provided in separate attachments. Bid amount is required by single lot which will include all items within that lot. (This property is not sensitive/hazardous itself, but has been stored in an area that contains some material used in production of explosives. The purchaser is fully responsible for any decontamination if the purchaser determines decontamination is required.) SEALED BID SALE: 3059-S0107A BID CLOSE DATE: March 5, 2010, 5:00 PM CALL Mr. Becky Sensabaugh at (423) 578-6125, Email Address: becky.sensabaugh@baesystems.com TO SCHEDULE A CONVENIENT DATE AND TIME TO INSPECT PROPERTY. DEFENSE FEDERAL ACQUISITION REGULATIONS Mandatory terms and conditions clauses 245.7309 - 245.7309.7 AND 245.7309.10 - 245.7309.14 apply. Standard Form 114C clause 24 prescribed by GSA FPMR (41CFR) 101-45-3) applies. REMOVAL OF PROPERTY MUST BE ACCOMPLISHED WITHIN TEN (10) DAYS FROM ASSIGNED REMOVAL DATE SPECIFIED IN THE NOTIFICATION OF SUCCESSFUL BID AWARD DOCUMENT. Property purchased in this sale cannot be brought back into BAE Systems. Lot # 01 (Includes 596 Line Items - Original Acquisition Cost $497,627.21) - WELDING TABLE (1 EA); EXTRUSION SHAPE2.00X1.50X144.00 (34.34 IN); EXTRUSION SHAPE 3.18X1.96X240.00 (14 EA); EXTRUSION SHAPE 3.18X1.966X120.00 LG (84 IN); EXTRUSION SHAPE 3.18X1.966X120.00 (113 IN); EXTRUSION SHAPE 120.00 (69.75 IN); EXTRUSION SHAPE 3.00X2.00X120.00 (8.35 IN); EXTRUSION SHAPE 2.00X1.50X180.00 (32 IN); EXTRUSION TUBE 2.00X8.00X.125 THK (3 EA); TUBE 1.50ODX065 WALL (1 EA); PANEL FLOOR BANDED ASSY (1 EA); CAPT LIFT HELICOPTER (16 EA); DOOR ENCLOSURE AFT ASSY (3 EA); SPRING RETAINER ARM RELASE DOOR FRONT (56 EA; MOUNT DOOR FRONT RELEASE DOOR AFT (5 EA); BAR CATCH PEV (17 EA); FRAME AFT ENCLS SEAL (14 EA); ANGLE BRACKET MOUNT (10 EA; AFT ENCLS DOOR HINGE (2 EA); PLATE CABLE RETAINER (1 EA); CABLE INSERT PIN (51 EA); PEV CABLE GUIDE THREADED PIN (2 EA); PEV CABLE GUIDE SHIELD (2 EA); EDGE RAIL TOP REAR WALL (1 EA); DOOR HINGE LIFT OFF (12 EA); LATCH MANUAL PIN HOUSING (14 EA); CABLE RETAINER (5 EA); ROLLER GUIDE (2 EA); GUIDE (2 EA); GUIDE END (8 EA); BLOCK LIFTING (2 EA); CAP LIFT (26 EA); SAFD ACCESS COVER (5 EA); FLOOR EDGE RAIL (6 EA); PULLEY AFT ENCLOSURE DOOR RELEASE (2 EA); PLATE MOUNTING PLUNGER (2 EA); WASHER PULLEY RETAINER (2 EA); TUBE INTERNAL HORIZONTAL (1 EA; SHROUD COVER ADJ TENSION BLOCK (4 EA); PEV CABLE GUIDE /BUSHING (2 EA); DOOR PLUNGER CABLE TUBING (2 EA); PLUNGER CYLINDER (2 EA); CAP PLUNGER CYLINDER (2 EA); PLATE CABLE RETAINER (6 EA); PLATE TUBING SUPPORT (2 EA); PIN ALUM 1/4X1.375 (2 EA); FLOOR EDGE RAIL LONG (2 EA); EDGE RAIL TOP SIDEWALL (9 EA); EDGE RAIL BOTTOM SIDEWALL (2 EA); EDGE RAIL RH SIDEWALL (1 EA); EDGE RAIL AFT SIDE SIDEWALL (2 EA); EDGE RAIL FWD SIDE SIDEWALL (2 EA); EDGE RAIL BOTTOM REAR WALL (2 EA); EDGE RAIL SIDE REAR PANEL (2 EA); EDGE RAIL DOOR LH SIDE (2 EA); EDGE RAIL DOOR RH SIDE (3 EA); EDGE RAIL DOOR UPPER RH SIDE (3 EA); EDGE RAIL UPPER LH SIDE (3 EA); EDGE RAIL ROOF LH SIDE (3 EA); EDGE RAIL ROOF AFT END (3 EA); EDGE RAIL ROOF FORWARD RH SIDE (3 EA; EDGE RAIL ROOF RH SIDE (2 EA); ROCKET SHROUD RHS (4 EA); EXTRUSION CAP OUTER (4 EA); SHROUD SUPPORT LOWER (4 EA); EDGE RAIL ROOF FORWARD RH SIDE (3 EA); SHIM PLATE (4 EA); RIVET 3/8" GRIP RANGE.120-.560 HUCK MGLP B12-12" (559 (EA); RIVET ¼ OD.415-.725 GRIP HUCK MGL 100 B8-12 (1,570 EA); SCREW PAN HEAD #4-40X1/8 MCMASTER-CARR 90272A103 (200 EA); SCREW BUTTON HEAD #8-32X250 LG MCMASTER-CARR 96452A190 (100 EA); SCREW SOCKET HEAD CAP ¼-20X.50 18-8 SS MCMASTER-CARR 2196A537 (158 EA); SCREW SHOULD STANDARD 18.8 SS 5/16-18 THREAD 3/8 SHOULDER DIA 2" SHOULDER LENGTH MCMASTER-CARR 90298A632 (2 EA); SCREW SHOULDER ¼ SHLDER DIAX5/8X10-24 ALLOY STEEL MCMASTER-CARR 91259A539 (22 EA); SCREW SHOULDER SOCKET HEAD ¼-20X5/16 SHOULDER DIAX5/8 MCMASTER-CARR 90298A580 (28 EA; SCREW SHOULDER SOCKET HEAD #10-32X.25 SHOULDER DIAX5/16 MCMASTER-CARR 94035A532 (63 EA); SCREW CAP SOCKET HEAD ZINC PLATED 10-24X3/4 LG MCMASTER-CARR 91306A348 (87 EA); SCREW SHOULDER HEAD CAP M12X30MM ALLOY STEEL MCMASTER-CARR 91290A618 (21 EA); SCREW HEAD CAP 3/18-16X1.75 ALLOY STEEL MCMASTER-CARR 91251A630(25 EA); SCREW SOCKET SET 5/16-18X5/8 CUP POINT ALLOY STEEL MCMASTER-CARR 91375A580 (92 EA); SCREW SET #8-32X3/16 LG MCMASTER-CARR 91375A189 (100 EA); SCREW SET #8-32X1/4 OVAL POINT MCMASTER-CARR 92765A155 (95 EA); SCREW SET #10-24X1/4 LG MCMASTER-CARR 94105A238 (184 EA); SCREW SET 5/16-18X3/8 DOG POINT MCMASTER-CARR 92505A576 (239 EA); SCREW SET #10-24X1/4 LG STEEL CUP POINT MCMASTER-CARR 91375A238 (300 EA); SCREW CAP SOCKET FLAT HEAD TOX PLUS 3/8-16X1.00 MCMASTER-CARR 94414A624 (275 EA); SCREW ¼-20X3/4 SHCS TORX PLUS FLAT HEAD MCMASTER-CARR 94414A540 (39 EA) NUT HEX M12X1.75MM PITCH 18-8 SS MCMASTER 91828A420 (25 EA); NUT HEX 3/8-16 THIN (JAM) XINC PLATED MCMASTER-CARR 91078A031 (100 EA); BEARING SLEEVE BRONZE 3/8"X1/4" MCMASTER-CARR 6391K171 (27 EA); WASHER FLAT TEFLON WHITE.281X.500X.031 MCMASTER-CARR 95630A470 (2 EA); WASHER 316 SS 21/32 IDX1.312 OD MCMASTER 91950A035 (207 EA); WASHER FLAT TEFLON WHITE.344X.875X.082 MCMASTER-CARR 95630A480 (31 EA); INSERT HELI-COIL ½-13 3585-8CN-Y-1000 (110 EA); INSERT HELI-COIL ½-13 3585-8CN-1000 (6 EA); INSERT HELI-COIL ½-20X1.0 1191-8CN-W-1000 MCMASTER-CARR 91732A758 (30 EA); RIVET NUT ALUM CLOSED END #10-24 AVK ALA1-1024-225-B (1,012 EA); RIVNUT 10-24 CLOSED END.130-225 GRIP MCMASTER-CARR 98280A310 (16 EA); PIN QUICK RELEASE W/STEEL RING 3/16 DIA 1.00 LG MCMASTER-CARR 98320A010 (14 EA); PIN CLEVIS 3/16 DIA 1 LG W/COTTER PIN MCMASTER-CARR 97245A607 (14 EA); PIN CLEVIS W/COTTER 18-8 SS 3/8 DIAX3.00 LG MCMASTER-CARR 92390A911 (14 EA); PIN CLEVIS ZINC PLATED W/HAIRPIN COTTER PIN 3/8 DIAX1.75 LG MCMASTER-CARR 97245A685 (30 EA); PIN DOWEL.25 DIAX1.50 LG MCMASTER-CARR 97395A494 (1 EA); PIN DOWEL 7/16 DIAX1.5 LG MCMASTER-CARR 98381A671 (50 EA); PIN DOWEL 3/8 DIA X1.5 LG MCMASTER-CARR 98381A628 (47 EA); PIN COTTER 316 SS 3/32 DIA.500 LG 100/PACK MCMASTER-CARR 98355A060 (152 EA); VALVE BREATHER AGM TA770-15-15-R (7 EA); SEAL SILICONE ½ JACKET 50 DUROMETER SHORE A VANGUARD (75 EA); TUBE TEFLON ¼ ODX1/32 WALL (2 EA); CLAMP PULL ACTION LATC TYPE 2"X1.5"375# CAPACITY DE-STA-CO MODEL 351-B (20 EA); LANYARD 6.00 LGX3/64 WIRE DIA EYE FITTING EACH END MCMASTER-CARR 90312A11 (1 EA); BUMPER RUBBER THREADED W/METAL CORE NEOPRENE 1.25 DIA X1.25 HT MCMASTER-CARR 9546K21 (4 EA); D SHACKLE 316L SS LONG BOW W/SCREW PIN 3/8 MATERIAL DIA MCMASTER-CARR 35685T45 (32 EA); FITTING PIPE PLUG SOLIC SQUARE HEAD ALUMINUM THREADED MCMASTER-CARR 44705K383 (107 EA); BEARING SLEEVE PLAIN RULON-J 5/16X1/2X3/8 LG MCMASTER-CARR 6377K44 (34 EA); BEARIGN SLEEVE PLAIN RULON-J 1/4X38/1/4 LG MCMASTER-CARR 6377K31 (8 EA); EYEBOLT W/NUT 316 SS WELDED WIRE ¼-20X4.00 LG SHANKX2.00 LG THREADX7/16 EYE ID MCMASTER-CARR 9494T36 (16 EA); EYEBOLT BLANK 316 SS 5/16 SHANK DIA X 2.25 SHANK LG MCMASTER-CARR 3109T13 (102 EA); KNOB W/STUD FOUR CAST IRON 3/8-16X1.75 MCMASTER-CARR 62215K55 (2 EA); MOUNT LEVELING SWIVEL 3/8-16 MCMASTER-CARR 6103K21 (2 EA); SPRING DIE DANELY DIE SET 9-2040-11 (2 EA); CONNECTOR MALE SWAGELOK A-500-1-4 (39 EA); FITTING REDUCER 3/8 TO ¼ ALUM SWAGELOK A-600 1-4 (39 EA); GROMMET RUBBER 3/8 HOLEX5/8 OD MCMASTER-CARR 9600K32 (100 EA); GROMMET RUBBER 5/16 DIA MCMASTER-CARR 9600K53 (105 EA); SEAL EPDM SPOINGE RUBBER.375 W X.25 THK X 50' LG MCMASTER-CARR 93725K72 (3 EA); SEAL EPDM FOAM RUBBER 1/8 DIA X 100 FT LG MCMASTER-CARR 8605K41 (1 EA); BEARING SINTERED BRONZE 3/8 ID X 5/8 OD X ¾ LG MCMASTER-CARR 6391K188 (8 EA); BEARING SINTERED BRONZE 3/8 IDX 5/8 OD X 1.00 LG MCMASTER-CARR 6391K189 (20 EA); CABLE TIES PANDUIT TLT.7M-M0 NEWARK 89F230 (1,000 EA); CABLE TIE MOUNT PANDUIT ABMM-87-C0 NEWARK 99F9557 (100 EA); CABLE TIE SPC BTP-6-RED NEWARK 23N3683 (100 EA); CABLE 1/8 DIA 7X19 WOUND STAINLESS (200 EA); THIMBLE CABLE LOOP 316 SS MCMASTER-CARR 3868T22 (56 EA); SWAGE ADJUSTABLE 316 SS 1.562 LG X 9/16 W MCMASTER-CARR 3677T52 (46 EA); CABLE WIRE ROPE 316 SS 1X7 3/32 DIA MCMASTER-CARR 8908T28 (53.75 FT); CONNECTOR GOUND ½-13 X 1.25 THOMAS & BETTS SP6DL (6 EA); STEEL COIL STAINLESS TYPE 301 SPRING TEMPERED.031 THK X.275 W X 149 FT MCMASTER-CARR 90415K11 (149 EA); PLUNGER SPRING ½-13 MCMASTER-CARR 8482A5 (4 EA); RIG SNAP - FITS 3/8 SHAFT DIA.029 GROOVE WIDTH MCMASTER-CARR 98410 A117 (46 EA); RING SNAP - FITS ¼ SHAFT DIA.029 GROOVE WIDTH MCMASTER-CARR 98410A113 (43 EA); SNAP SPRING 7/8 OPENING MCMASTER-CARR 3934T14 (3 EA); ALODINE TOUCH-N-PREP HENKLE 1132 (11 EA ); SEALANT CONDUCTIVE SM-D-947080-25 CHOMERICS 51-01-1035-000 10 OZ KIT (20 EA); EXTRUSION TUBE 253.00 LONG (39 EA); EXTRUSION TUBE 54.00 LONG (7 EA); EXTRUSION TUBE 104 LONG (4 EA); EXTRUSION TUBE 253 LONG (2 EA); PLATE ARMOR.250 THK X 4.125X12.125 MIL=A-46100 (2 EA); PLATE ARMOR.250 THK X 6.375 X 20.3125 MIL-A-46100 (5 EA); PLATE ARMOR.250 THK X 11.75 X 20.375 MIL-A-46100 (2 EA); PLATE ARMOR.250 THK X 12 X 1.50 MIL-A-46100 (3 EA); PLATE ARMOR.250 THK X 23.50 X 1.50 MIL-A-46100 (7 EA); PLATE ARMOR.250 THK X 2 X 48 MIL-A-46100 (3 EA); PLATE ARMOR.250 THK X 7 X 24 MIL-A-46100 (2 EA); PLATE 32 X 54 X.625 THK 5083-H131 (9 EA); PLATE 32 X 54 X.750 THK 5083-H131 (9 EA); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (37 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (2,304 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (1,344 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (64 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (3,600 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (2,700 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (2,808 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X1.946 THK (1,440 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (96 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK ( 512 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (1,152 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (288 S1); COE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (576 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (2,880 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5952 48 X 96 X 1.946 THK (1,152 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (1,296 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (1,920 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (432 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (5,184 S1); CORE HONEYCOMB ALUM SPEC 3.1-1/8-5052 48 X 96 X 1.946 THK (288 S1); CORE HONEY COMB ALUM SPEC 4.3-1/4-5052 122 X 50 X 460 THK (3 EA); CORE HONEYCOMB ALUM SPEC 4.3-1/4-5052 122 X 50 X.460 THK (1,326 S1); EXTRUSION SHAPE 2 X 1.50 X 144 LG 6061-T6 (34.34 IN); EXTRUSION SHAPE 3.18 X 1.966 X 240 LG 6061-T6 (14 EA); EXTRUSION SHAPE 3.18 X 1.966 X 120 LG 6061-T6 (84 IN); EXTRUSION SHAPE 3.18 X 1.966 X 120 LG 6061-T6 (113 IN); EXTRUSION SHAPE 120 LG 6061-T6 (69.75 IN); EXTRUSION SHAPE 120 LG 6061-T6 (4 EA); EXTRUSION SHAPE 3 X 2 6061-T6 (8 EA); EXTRUSION SHAPE 3 X 2 6061-T6 (12 EA); EXTRUSION SHAPE 3 X 2 X 120 LG 6061-T6 (8.35 IN); EXTRUSIN SHAPE 2 X 1.50 X 180 LG 6061-T6 (32 IN); EXTRUSION SHAPE 2 X 1.50 X 216 LG 6061-T6 (3 EA); EXTRUSION SHAPE 2 X 1.50 X 228 LG 6061-T6 (5 EA); EXTRUSION SHAPE 2 X 1.50 X 240 LG 6061-T6 (4 EA); EXTRUSION TUBE 2 X 8 X.125 THK 60061-T6 (27 EA); TUBE.375 OD X.375 OD X.049 WALL 6061-T6 (1 EA); TUBE 1.50 OD X.065 WALL 6061-T6 (1 EA); TUBE 2 X 4 X.125 THK ALLOY 6061-T6 (26 EA); TUBE 2 X 4 X.125 THK ALLOY 6061-T6 (104 IN); BASE ASSY (3 EA); PANEL FLOOR BONDED ASSY (2 EA); PANEL DOOR BONDED ASSY (1 EA) PANEL ROF BONDED ASSY (2 EA); PANEL TOP BONDED AFT ENCLOSURE (2 EA); PANEL END BONDED AFT ENCLOSURE (2 EA); PANEL DOOR BONDED AFT ENCLOSURE (1 EA); BLOCK LIFT HELICOPTER (12 EA); CAP LIFT HELICOPTER (26 EA);GASKET RUPTURE DISK (1 EA); GASKET RUPTURE DISK OUTER (2 EA); GASKET FLOOR (3 EA); THIMBLE FCC (12 EA); SUPPORT SHROUD ROCKET ASSY (8 EA); TUBE & BLOCK ASSY (3 EA); PAN ENCLOSURE SAFD (5 EA); COVER ACCESS SAFD (16 EA) ;WELDMENT FRAME SIDE ENCLOSURE AFT (4 EA); PLATE ARMOR ASSY (4 EA); WELDMENT FRAME PANEL RUPTURE (2 EA); TRY DESSICANT ASSY 10 EA); COVER SHROUD ASSY (3 EA); PASS THRU PEV ASSY (1 EA); PORT CONDUIT ASSY (11 EA); CONDUIT UPPR ASSY (11 EA); PLATE SEAL ENCLOSURE AFT (12 EA): BASE ASSY ROCKET SHROUD (3 EA); ANGLE ANCHOR RELEASE DOOR FRONT (65 EA); WALL SIDE ASSY RH (6 EA); WALL SIDE ASSY LH (6 EA); WELDMENT LH (1 EA); WELDMENT RH (2 EA); SUPPORT ARMOR DOOR FRONT (223 EA); DOOR ENCLOSURE AFT ASSY (3 EA); GUIDE LOW FRICTIN (8 EA); AUTO LATCH WASHER (138 EA); INSERT CORNER (134 EA); SUPPORT CORE PANEL RUPTURE (14 EA); SUPPORT PLATE PRESSURE PANEL RUPTURE (24 EA); PLATE PRESSURE PANEL RUPTURE (12 EA); INSERT - LOWER SUPPORT ROCKET SHROUD (10 EA; WEDGE ROCKET SHROUD SUPPORTS (24 EA); SHAFT PULL (11 EA); BLOCK BEARING (44 EA); KEY PULL SHAFT (1 EA); COLLAR PULLEY (11 EA); PLATE RETAINER CABLE (12 EA); EXTRUSION AFT ENCLOSURE (2 EA); PIN SPRING PLUNGER (541 EA) PIN BARREL SPRING (52 EA); SHAFT RELEASE DOOR FRONT (11 EA); ARM PIVOT RELEASE DOOR FRONT (23 EA); PLANT ANCHOR RELEASE DOOR FRONT (667 EA); CAM PULLEY RELEASE DOOR FRONT (66 EA); SPACER BUSHING RELEASE DOOR FRONT (207 EA); SPRING RETAINER ARM RELEASE DOOR FRONT (56 EA); COLLET RELEASE CABLE RELEASE DOOR AFT (3 EA); TUBE RELEASE DOOR AFT (3 EA); SHAFT CABLE RELEASE DOOR AFT (3 EA); MOUNT DOOR FRONT RELEASE DOOR AFT (5 EA); BLOCK MOUNT TUBE RELEASE DOOR AFT (3 EA); PLATE SEAL DOOR ENCLOSURE AFT (4 EA); ARMOR FRONT DOOR CABLE (24 EA); ARMOR FRONT DOOR CABLE MEDIUM (24 EA); ARMOR FRONT DOOR CABLE SHORT (48 EA); RETAINER (24 EA); CABLE ATTACHMENT PLATE (12 EA); FRAME AFT ENCLS SEAL (14 EA); TUBE ROOF INTERNAL (5 EA); ANGLE BRACKET MOUNT (10 EA); PLUNGER MOUNTING BLOCK (46 EA); AFT ENCLS BOTTOM PLATE (9 EA); AFT ENCLS DOOR HINGE (11 EA); PLATE CABLE RETAINER (1 EA); CABLE INSERT PIN (67 EA); DOOR FRAME VERTICAL (14 EA); BRACKET AFT ENCLOSURE DOOR LATCH (52 EA); DOOR CATCH AFT ENCLOSURE (51 EA); TAB MOUNTING - DOOR ARMOR (24 EA); PLATE PEV COVER (11 EA);SANGLE - DRAWER SLIDE SAFD ASSESS COVER (12 EA); SHROUD BASE BLOCK (10 EA); SHROUD COVER BLOCK (18 EA); SHROUD COVER LOCATING BLOCK (18 EA); PLATE RUPTURE DISK SPACER (11 EA); PLATE RUPTURE DISK MOUNT (11 EA); AFT WALL SAFD ACCESS COVER (6 EA); PEV CABLE GUIDE THREADED PIN (2 EA); PEV CABLE GUIDE SHIELD (2 EA); FLOOR EDGE RAIL SHORT (7 EA); EDGE RAIL TOP SIDEWALL (7 EA); EDGE RAIL BOTTOM SIDEWALL (10 EA); EDGE RAIL RH SIDEWALL (6 EA); EDGE RAIL AFT SIDE SIDEWALL (11 EA); EDGE RAIL FWD SIDE SIDEWALL (11 EA); TUBE SUPPORT (6 EA); EDGE RAIL BOTTOM REAR WALL (8 EA) EDGE RAIL TOP REAR WALL (8 EA); EDGE RAIL SIDE REAR PANEL (12 EA); TUBE INTERNAL (3 EA); DOOR HINGE (8 EA); EDGE RAIL DOOR LH SIDE (6 EA); EDGE RAIL DOOR RH SIDE (5 EA); EDGE RAIL DOOR UPPER RH SIDE (6 EA); EDGE RAIL DOOR UPPER LH SIDE (5 EA); EXTERNAL RAIL DOOR TOP (1 EA); EDGE RAIL ROOF LH SIDE (6 EA); EDGE RAIL ROOF AFT END (6 EA); EDGE RAIL ROOF FORWARD RH SIDE (31 EA);EDGE RAIL ROOF RH SIDE (6 EA); SHROUD DRAW SHIM (12 EA); PLATE TTTOM SAFD ENCLOSURE (6 EA); PLATE PORT SIDE (6 EA); EXTRUSION CAP OUTER (24 EA); ANCHOIR EYE BOLT (37 EA) END CAP (18 EA); SPACER AUTO LATCH (15 EA); SHROUD SUPPORT LOWER (20 EA); EDGE RAIL ROOF FORWARD LH SIDE (31 EA); END CAP (20 EA); TUBE INTERNAL (2 EA);SHIM PLATE (24 EA); FLOOR EDGE RAIL LONG W ¼ END PT HOLES (6 EA); KNIFE PEV (1 EA); PLATE PEV MOUNT (11 EA); HARD POINT (81 EA); DOOR RAIL UPPER VERTICAL (1 EA);ARMOR PLATE (5 EA); LATCH SPACER AUTOMATIC (16EA); TUBE CABLE PASS THRU (2 EA); LATCH STUD AUTOMATIC (18 EA); AUTO LATCH FORK (16 EA); AUTO LATCH BASE (16 EA);PLATE STARBOARD SIDE (6 EA); PLATE FORWARD SAFD ENCLOSURE (6 EA); PLATE AFT (6 EA); FLANGE MOUNTING FORE/AFT (12 EA); SIDEWALL SAFD ACCESS COVER (12 EA); WALL FWD SAFD ACCESS COVER (6 EA); TOP SAFD ACCESS COVER (6 EA); SKIN (7 EA); SKIN END WALL (6 EA); CORE HONEYCOMB ALUM (4 EA); CORE HONEYCOMB ALUM (4 EA); CORE HONEYCOMB ALUM (3 EA); CORE HONEYCOMB ALUM (5 EA); CORE HONEYCOMB ALUM (9 EA); MONGOOSE PQT #3 (86435004) LAP RELOAD (1 EA); MONGOOSE PQT#2 (86435004) LAP RELOAD (1 EA); CORE HONEYCOMB ALUM (2 EA); CORE HONEYCOMB ALUM (1 EA); CORE HONEYCOMB ALUM (2EA); CORE HONEYCOMB ALUM (2 EA); CORE HONEYCOMB ALUM (2 EA); EDGE RAIL TOP REAR WAL (1 EA); DOOR HINGE LIFT OFF (12 EA); LATCH MANUAL PIN HOUSING (14 EA); WELDMENT ROOF FRAME (1 EA); CABLE RETAINER (3 EA); CABLE RETAINER (2 EA); ROLLER GUIDE (2 EA); GUIDE (2 EA); GUIDE END (8 EA); BLOCK LIFTING (2 EA); CAP LIFT (26 EA); MONGOOSE FT4 (1 EA); SAFD ACCESS COVER (5 EA); FLOOR EDGE RAIL (6 EA) PULLEY AFT ENCLOSURE DOOR RELEASE (2 EA); PLATE MOUNTING PLUNGER (2 EA); WASHER PULLEY RETAINER (2 EA); SHROUD COVER ADJ TENSION BLOCK (4 EA);PEV CABLE GUIDE BUSHING (2 EA); DOOR PLUNGER CABLE TUBING (2 EA); PLUNGR CYLINDER (2 EA); CAP PLUNGER CYLINDER (2 EA); PLATE CABLE RETAINER (6 EA); PLATE TUBING SUPPORT (2 EA); PIN ALUM ¼ X 1.375 (2 EA); FLOOR EDGE RAIL LONG (2 EA); FLOOR EDGE RAIL SHORT (2 EA); EDGE RAIL TOP SIDEWALL (9 EA); EDGE RAIL BOTTOM SIDEWALL (2 EA); EDGE RAIL AFT SIDE SIDEWALL (2 EA); EDGE RAIL FWD SIDE SIDEWALL (2 EA); EDGE RAIL BOTTOM REAR WALL (2 EA); EDGE RAIL SIDE REAR PANEL (2 EA); EDGE RAIL DOOR LH SIDE (2 EA); EDGE RAIL DOOR RH SIDE (3 EA); EDGE RAIL DOOR UPPER RH SIDE (3 EA); EDGE RAIL UPPER LH SIDE (3 EA); EDGE RAIL ROOF LH SIDE (3 EA); EDGE RAIL ROOF AFT END (3 EA); EDGE RAIL ROOF FORWARD RH SIDE (3 EA); EDGE RAIL ROOF RH SIDE (2 EA); ROCKET SHROUD RHS (4 EA); EXTRUSION CAP OUTER (4 EA); SPACER AUTO LATCH (4 EA); SHROUD SUPPORT LOWER (4 EA) EDGE RAIL ROOF FORWARD RH SIDE (3 EA); SHIM PLATE (4 EA); SLEEVE RING CONNECTOR (5 EA); RIVET BLIND COUNTERSUNK CHERRY SSCQ-86 (29 EA); RIVET BLIND HUCK BOM R8-10 (9 EA); RIVET BLIND HUCK BOM 48-12; RIVET BLIND HUCK BOM R10-6 (65 EA); RIVET 5/16 DIA X.438-562 GRIP HUCK BOM R10-8 (214 EA); RIVET BLIND HUCK MGLP R8-14 (28 EA);RIVET ¼ OD.350-625 GRIP HUCK MGLP B8-10 (1,229 EA); RIVET 3/8" GRIP RANGE.120-.560 HUCK MGLP B12-12 (559 EA); RIVET ¼ HUCK MGLP B8-6 (64 EA); RIVET 5/16 HUCK.300-.400 GRIP MAGNA-BULB MBP-R-10-6 (1,926 EA); RIVET 5/16 HUCK.400-.500 GRIP MAGNA-BULB MBP-R-10-8 (1,998 EA); RIVET 5/16 HUCK.500-.600 GRIP MAGNA-BULB MBP-R-10-10 (1,537 EA); RIVET BLIND COUNTERSUNK HUCK MGL 100 R8-8 (48 EA); RIVET ¼ OD.160-.475 GRIP HUCK MGL100 B8-8 (231 EA); RIVET Q/4 OD.415-.725 GRIP HUCK MGL100 B8-12 (64 EA); RIVET PROTRUDE ALUMINUM 3/16 HUCK MGLP B6-4 (5,005 EA); RIVET COUNTER SUNK HUCK MGL 100 B6-6 (4,085 EA); RIVET BLIND PROTRUDING HEAD CHERRY SSPQ-86 (20 EA); RIVET BLIND PROTRUDING HEAD CHERRY SSPQ-88 (18 EA); RIVET BLIND PROTRUDING HEAD CHERRY SSPQ-10 (16 EA); CABLE TIE NYLON 4.00 LG X 5/8 BUNDLE MCMASTER-CARR 7130K52 (85 EA); SCREW SHEET METAL PAN HEAD PHILLIPS 18-8 SS #8 X.50 MCMASTER-CARR 92470A194 (300 EA); SCREW #14 X 1-1/2" SELF TAP HEX HEAD MCMASTER-CARR 90066A317 (259 EA); BOLT HEX HEAD ¼-20 X 1 XINC PLATED MCMASTER-CAR 92865A542 (382 EA); SCREW PAN HEAD #4-40 X 1/8 MCMASTER-CARR 90272A103 (200 EA); SCREW HEX HEAD #14 X2 SHEET METAL W/EALING WASHER MCMASTER-CAR 90066A319 (71 EA); WASHER ZINC PLATED STEEL M4 SCREW X 1 MM THK MCMASTER-CARR 91100A130 (100 EA); SCREW CAP HEX HEAD STEEL GRADE 5 CADMIUM PLATED UNC-2A ¼-20X1.500 MS90725-12 S/S BY NASM90725 (200 EA); SCREW BUTTON HEAD #8-32 X.250 LG MCMASTER-CARR 96452A190 (100 EA); SCREW SOCKET HEAD CAP ¼-20 X.50 18-8 SS MCMASTER-CARR 92196A537 (158 EA); SCREW SOCKET HEAD CAP FLAT ¼-20 X 1 LG ZINC PLATED STEEL MCMASTER-CARR 91263A562 (178 EA); SCREW CAP SOCKET HEAD #10-24 X 1.25 LG 18-8 CRES MCMASTER-CARR 92196A249 (731 EA); SCREW SOCKET HEAD CAP SINC PLATED STEEL 10-24X1/2 LG MCMASTER-CARR 90128A220 (50 EA); SCREW SOCKET HEAD CAP SINC PLATED STEEL 10-32 X ½ LG MCMASTER-CARR 90128A942 (90 EA); SCREW CAP SOCKET HEAD FLAT ¼-20 X 1.25 18-8 SS MCMASTER-CARR 92196A544 (100 EA); SCREW CAP SOCKET HEAD 6-40 X 3/8 LG 18-8 SS MCMASTER-CARR 92196A136 (99 EA); SCREW CAP HEX HEAD ¼-20 X 1.25 LG ZINC PLATED STEEL MCMASTER-CARR 91257A544 (340 EA); SCREW SHOULDER STANDARD 18-8 SS 5/16-18 THREAD 3/8 SHOULDER DIA 2" SHOULDER LENGTH MCMASTER-CARR 80298A632 (2 EA); SCREW SHOULDER ¼ DIA X 5/8 X 10-24 ALLOY STEEL MCMASTER-CARR 91259A539 (22 EA); SCREW SHOULDER SOCKET HEAD ¼-20 X 5/16 SHOULDER DIA X 5/8 MCMASTER-CARR 9-298A580 (28 EA); SCREW SHOULDER SOCKET HEAD #10-32 X.25 SHOULDER DIA X 5/16 MCMASTER-CARR 94035A532 (63 EA); SCREW SHOULDER 5/16 DIA X.75 X ¼-20 UNC-2A THREAD SS MCMASTER-CARR 97345A581 (2 EA); SCREW THREAD CUTTING ZINC-PLTD STL FLAT HD PHILLIPS.250-20 X 1.250 LG MCMASTER-CARR 90086A544 (22 EA); SCREW CAP SOCKET HEAD ZINC PLATED 10-24 X ¾ LG MCMASTER-CARR 91306A348 (87 EA); SCREW FLAT HEAD PHILLIPS ¼-20 X 1 LG ZINC-PLATED STEEL MCMASTER-CARR 90471A416 (150 EA); SCREW CAP SOCKET HEAD ZINC PLATED ¼-20 X 7/8 LG MCMASTE-CARR 91306A382 (34 EA); SCREW CAP SOCKET HEAD STEEL ¼-20 X ¾ MCMASTER-CARR 91306A379 (20 EA); SCREW FLAT HEAD SOCKET CAP 3/8-16 X 1 SELF LOCKING STEEL MCMASTER-CARR 91266A624 (330 EA); SCREW SOCKET HEAD CAP COATED STEEL 5/16-18 X 3/8 LG MCMASTER-CARR 91274A224 (20 EA); SCREW SHOULDER HEAD CAP M12 X 30MM ALLOY STEEL MCMASTER-CAR 91290A618 (21 EA); SCREW SHOULDER HEAD CAP 3/8-16 X 1.75 ALLOY STEEL MCMASTER-CARR 91251A630 (25 EA); SCREW SHOULDER HEAD CAP #10-24 X 3/8 ALLOY STEEL MCMASTER-CARR 91251A240 (80 EA); SCREW SOCKET HEAD CAP M4 X 20MM LG CLASS 12.9 ALLOY STEEL MCMASTER-CARR 91290A168 (88 EA); SCREW SOCKET SET SC10-24 X 1-1/4 CUP POINT ALLOY STEEL MCMASTER-CARR 91375A249 (198 EA); SCREW SOCKET SET 5/16-18 X 5/8 CUP POIT ALOY STEEL MCMASTER-CARR 91375A580 (92 EA); SCREW SET #10-24 5/16 LG MCMASTER-CARR 91375A239 (130 EA); SCREW SET #8-32 X 3/16 LG MCMASTER-CARR 91375A189 (100 EA); SCRW SET 5/16-18 X ¾ DOG PNT MCMASTER-CARR 92505A581 (114 EA); SCREW SET #8-32 X ¼ OVAL POINT MCMASTER-CARR 92765A155 (95 EA); SCREW SET #10-24 LG MCMASTER-CARR 94105A238 (184 EA); SCREW SET 5/16-18 X 3/8 DOG POINT MCMASTER-CARR 92505A576 (239 EA); SCREW SET #10-24 X ¼ LG STEEL CUP POINT MCMASTER-CARR 91375A238 (300 EA); SCREW SOCKET SET 10-24 THREAD X.125 LG KNURLED FACE MCMASTER-CARR 80289A235 (75 EA); SCREW CAP SOCKET FLAT HEAD TORX PLUS 3/8-16 X 1 MCMASTER-CARR 94414A624 (275 EA); SCREW ¼-20 X ¾ SHCS TORX PLUS FLAT HAD MCMASTER-CARR 94414A540 (39 EA); NUT HEX M12 X 1.75 MM PITCH 18-8 SS MCMASTER 91828A420 (25 EA); NUT HEX 3/8-16 THIN (JAM) ZINC PLATED MCMASTER-CARR 91078A031 (100 EA); BARING SLEEVE BRONZE 3/8" X 14" MCMASTER-CARR 6391K171 (27 EA); NUT PUSH MCMASTER-CARR 94807A029 (28 EA); NUT LOCK DEFORNED THREAD MCMASTER-CARR 92501A450 (5 EA); WASHER FLAT AN 960-C416L MCMASTER-CARR 98017A655 (1 EA); WASHER LOCK SPRING HELICAL REGULAR (MEDIUM) SERIES MS35338-139 (427 EA); WASHER FLAT STEEL MS51412-4 (65 EA); WASHER BELLEVILLE.25 ID X.05 THK MCMASTER-CARR 9135A112 (150 EA); WASHER FLAT STEEL.266 ID X.563 OD X.046 THK MCMASTER-CARR 91090A106 (67 EA); WASHER EXTERNAL TOOTH M4 SCREW MCMASTER-CARR 91105A124 (90 EA); WASHER FLAT TEFLON WHITE.281 X.500 X.031 MCMASTER-CARR 95630A470 (2 EA); WASHER FLAT 1 15/16" OD X 21/32 ID MC MASTER-CARR 90126A035 (17 EA); WASHER 316 SS 21/32 ID X 1.312 OD MCMASTER 91950A035 (207 EA); WASHER FLAT TEFLON WHITE.344 X.875 X.082 MCMASTER-CARR 95630A480 (31 EA); WASHER FLAT 11/16 OD X 11/32 ID X.051 THK ZINC PLATED STEEL MCMASTER-CARR 90126A030 (190 EA); INSERT RIVET NUT AVK AKS7-420-165 (74 EA); INSERT RIVET NUT ¼-20 CS HEAD AVK RNS420-271 (837 EA); INSERT RIVET NUT 10-32 ALUM MCMASTER-CARR 98560A176 (37 EA); INSERT RIVET NUT 8-32 ALUM MCMASTER-CARR 98560A173 (78 EA); INSERT HELI-COIL ½-13 3585-8CN-Y-1000 (110 EA); INSERT HELI-COIL ½-13 3585-8CN-1000 (6 EA); INSERT HELI-COIL ½-20 X 1 1191-8C-W-1000 MCMASTER-CARR 91732A758 (30 EA); INSERT HELI-COIL #8-32 X.164 LG MS21209C0810L (120 EA); INSERT HELI COIL #10-32 X.190 LG MS21209F1-10L (50 EA); INSERT HELI COIL ½-20 X 1 MS21209F8-20L (12 EA); RIVET NUT ALUM CLOSED END #10-24 AVK ALA1-1024-225B (1,012 EA); RIVET NUT ALUM CLOSED END ¼-20 AVK ALA1-420-165B (650 EA); RIVNUT 10-24 CLOSED END.130-.225 GRIP MCMASTER-CARR 98280A310 (16 EA); PIN CLEVIS STEEL PLAIN ¼ DIA 2.1093 GRIP 2.250 LG MCMASTER-CARR 98306A169 (102 EA); PIN QUICK RELEASE W/STEEL RING 3/16 DIA 1 LG MCMASTER-CARR 98320A010 (14 EA); PIN CLEVIS 3/16 DIA 1 LG W/COTTER PI MCMASTER-CARR 97245A607 (14 EA); PIN CLEVIS W/COTTER 18-8 SS 3/8 DIA X 3 LG MCMASTER-CARR 92390A911 (14 EA); PIN CLEVIS 3/16 DIA X 1 W/RETAINING RING MCMASTER-CARR 92735A130 (4 EA); PIN CLEVIS ZINC PLATED W HAIRPIN COTTER PIN 3/8 DIA X 1.75 LG MCMASTER-CARR 97245A685 (30 EA); SPRING SNAP NICKEL PLATED STEEL ½ OPENING MCMASTER-CARR 3921T14 (12 EA); PIN DOWEL.25 DIA X 1.50 LG MCMASTER-CARR 97395A494 (1 EA); PIN DOWEL 7/16 DIA X 1.5 LG MCMASTER-CARR 98381A671 (50 EA); PIN DOWEL 3/8 DIA X 1.5 LG MCMASTER-CARR 98381A628 (47 EA); PIN COTTER 316 SS 3/32 DIA.500 LG 100/PACK MCMASTER-CARR 98355A00 (152 EA); PIN SPRING ZINC PLATED STEEL 3/16 DIA X 1.50 LG CMASTER-CQARR 90692A261 (96 EA); HINGE CONTINUOUS EXTRUDED ALUMINUM 3 15/16' OPEN WD X 72' LG MS20001-16-7200 MCMASTER-CARR 1792A23 (14 EA); HINGE 5052 ALUM 2 W X.120 THK MCMASTER-CARR 1581A167 (3 EA); VALVE BREATHER AGM TA770-15-15-R (7 EA); HUMIDITY INDICATOR HOUSING AGM TA446 (3 EA); HUMIDITY INDICATOR AGM TA378-HC-MH1 (50 PIECES) (.88 EA); VALVE 2 WAY PRESSURE RELIEF BREATHER AGM TA 770-2348 (29 EA); SEAL 30-40 DUROMETER CONDUCTIVE SILICONE ½ JACKET VANGUARD 16187 (193 EA); SEAL SILICONE ½ JACKET 50 DUROMETER SHORE A VANGUARD (75 EA); O-RING CONDUCTIVE 043 50 DUROMETER VANGUARD 2155NH-03-D50-ORA-NPS-BND-11.18 (44 EA); O-RIG EPDM 046 80 DUROMETER PARKER 2-046-E515-80 (25 EA); O-RING EPDM 209 70 DUROMETER (65 EA); TUBE TEFLON ¼ OD X 1/32 WALL (2 EA); CLAMP PULL ACTION LATCH TYPE 2" X 1.5" 375# CAPACITY DE-STA-CO-MODEL 351-B (20 EA); LANYARD 6 LG X 3/64 WIRE EYE FITTING EACH END MCMASTER-CARR 90312A11 (1 EA); LATCH COMPRESSION T-HANDLE SOUTH CO E3-31-15 (8 EA); BUMPER RUBBER THREADED W/METAL CORE NEOPRENE 1.25 DIA X 1.25 HT MCMASTER-CARR 9546K21 (4 EA); D-SHACKLE 316L SS LONG BOW W/SCREW PIN 3/8 MATERIAL DIA MCMASTER-CARR 35685T45 (32 EA); FITTING PIPE PLUG SOLID SQUARE HEAD ALUMINUM THREADED MCMASTER-CARR 44705K383 (107 EA); BEARING SLEEVE PLAIN RULON-J 5/16 X ½ X 3/8 LG MCMASTER-CARR6377K44 (34 EA); BEARING SLEEVE PLAIN RULON-J ¼ X 38 X ¼ LG MCMASTER-CARR 6377K31 (8 EA); BEARING SLEEVE PLAIN RULON-J ¾ ID X 1 OD X ½ LG MCMASTER-CARR 6377K62 (43 EA) EYEBOLT W/NUT 316 SS WELDED WIRE ¼-20 X 4 LG SHANK X 2 LG THREAD X 7/16 EYE ID MCMASTER-CARR 9494T36 (16 EA); EYEBOLT BLANK 316 SS 5/16 SHANK DIA X 2.25 SHANK LG MCMASTER-CARR 3109T13 (102 EA); KNOB W/STUD FOUR CAST IRON 3/8-16 X 1.75 MCMASTER-CARR (2 EA); SLEEVE CRIMP FOR 3/32 DIA CABLE TIN PLATED COPPER MCMASTE-CARR 3883T42 (103 EA); MOUNT LEVELING SWIVEL 3/8-16 MCMASTER-CARR 6103K21 (2 EA); SPRING DIE DANELY DIE SET 9-2040-11 (2 EA); CONNECTOR MALE SWAGELOK A-500-1-4 (39 EA); FITTING REDUCER 3/8 TO ¼ ALUM SWAGELOK A-600-1-4 (39 EA); KEY STOCK STANDARD ALUMINUM ¼ X 1/4X12" MCMASTER-CARR 99108A100 (12 EA); TURNBUCKER JAW & JAW STEEL GALVANIZED FORGED ¼-20 UNC-2A THREAD 50 LB RATED MCMASTER-CARR 3001T51 (4 EA); GROMMET RUBBER 3/8 HOLE X 5/8 OD MCMASTER-CARR 9600K32 (100 EA); GROMMET RUBBER 5/16 DIA MCMASTER-CARR 9600K53 (105 EA); COLLAR CLAMP ON ALUM 1.5 BORE DIA X 2.375 OD MCMASTE-CARR 6157K23 (2 EA); SEAL EPDM.187 THK X.375 WX50" LG ROLL MCMASTER-CARR 93725K62 (29 EA); SEAL EPDM ADHESIVE BACKED.125 THK X 2 W X 36 LG MCMASTER-CARR 8990K23 (4 EA); SEAL STAINLESS BALL.250 DIA GRADE 24 MC MASTER-CARR 9642K39 (45 EA); BARING BALL STEEL ABEC-1 DOUBLE SEALED R4 MCMASTER-CARR 60355K87 (242 EA); STEEL STAINLESS BALL 440C 7/32 DIA GRADE 1 MCMASTER-CARR 9529K44 (88 EA); BEARING SINTERED BRONZE 3/8 ID X 5/8 OD X ¾ LG MCMASTER-CARR 6391K188 (8 EA); BEARING SINTERED BRONZE 3/8 ID X 5/8 OD X 1 LG MCMASTER-CARR 6391K189 (20 EA); CABLE TIES PANDUIT TLT.7M-M0 NEWARD 89F230 (1,000 EA); CABLE TIE MOUNT PANDUIT ABMM-87-C0 NEWARK 99F9557 (100 EA); CABLE TIE SPC BTP-6 RED NEWARK 23N3683 (100 EA); WIRE EYEBOLT W/NUT ZINC PLATED ¼-20 X 1.50 SHANK X 1.25 LG THREAD MCMASTER-CARR 9489T18 (2 EA); BOLT EYE SHOULDERED GALVANIZED STEEL 3/8-16 THREAD X 2.50 SHANK LG MCMASTER-CARR 3018T16 (2 EA); BOLT EYE STEEL ¼-20 X 1 SHANK MCMASTER-CARR 3014T45 (26 EA); SNAP SPRING DOUBLE W/SAFETY LOCK.75 OPENING MCMASTER-CARR 3927T22 (62 EA); SHEET RUPTURE PANEL MV 8 X 8 316 SS OSECO D99-7490-011 (2 EA); CABLE 1/8 DIA 7 X 19 WOUND STAINLESS (200 EA); SLEEVE STOP FOR 3/32 DIA CABLE ZINC PLATED COPER MCMASTER-CARR 3936T13 (41 EA); THIMBLE CABLE LOOP 316 SS MCMASTER-CARR 3868T22 (56 EA); SWAGE ADJUSTABLE 316 SS 1.562 LG X 9/16 W MCMASTER-CARR 3677T52 (46 EA); THIMBLE WIRE ROPE 316 SS HEAVY DUTY FOR ¼ DIA CABLE MCMASTER-CARR 3495T52 (61 EA); THIMBLE WIRE ROPE 304 SS MCMASTER-CARR 8914T22 (25 EA); ROPE WIRE TYPE 304 SS 3/32" MCMASTER-CARR 3461T64 (532 FT); CABLE WIRE ROPE 316 SS 1 X 7 3/32 DIA MCMASTER-CARR 8908T28 (53.75 FT); CABLE WIRE ROPE PER FOOT 316 SS 7 X 19 ¼ DIA MCMASTER-CARR 8908T52 (100 EA); CLIP WIRE ROPE CAST TYPE 304 SS ¼ DIA WIRE ROPE MCMASTER-CARR 31985T23 (251 EA); FITTING END CLEVIS FOR ¼ WIRE ROPE MCMASTER-CARR 3473T66 (26 EA); CONNECTOR GROUND ½-13 X 1.25 THOMAS & BETTS SP6DL (6 EA); SPRING CMPRESSION 2 LG X.360 OD WIRE DIA OF.040 ASSOCIATED SPRING RAYMOND C0360-040-2000 (12 EA); STEEL COIL STAINLESS TYPE 301 SPRING TEMPERED.031 THK X.275 W X 149 FT MCMASTER-CARR 90415K11 (149 EA); PLUNGER SPRING BALL-NOISE SS BODY SS BALL 10-32 X 0.513 SELF-LOCKING MCMASTER-CARR.3408A95 (84 EA); PLUNGER SPRING BALL NOSE ¼-20 LOCKING MCMASTER-CARR 3408A98 (86 EA); PLUNGER SPRING ¾-10 3.75" BODY 1 NOSE MCMASTER-CARR 33705A21 (48 EA); PLUNGER SPRING ½-13 MCMASTER-CARR 8482A5 (4 EA);BALL SPRING PLUNGER 8.32 SS MCMASTER-CARR 3408A91 (45 EA); SPRING EXTENSION STEEL 8 X 37/64 OD MCMASTER-CARR 9654K142 (64 EA); LUG GROUNDING ALUM W/TIN PLATED 14STR-BURNDY K2A25U (14 EA);TAPE CONDUCTIVE ADHESIVE 1 W X 36 YDS CHOMERICS CAD-36-201-0100 (1.75 RL); NEOPRENE RUBBER 1/16 OPENING 5/16 INSIDE DEPTH MCMASTER-CARR 8507K63 (19 FT); RING SNAP - FITS 3/8 SHAFT DIA.029 GROVE WIDTH MCMASTER-CARR 98410A117 (46 EA); RING SNAP - FITS SHAFT DIA.029 GROOVE WIDTH MCMASTER-CARR 98410A113 (43 EA); RING EXTERNAL RETAINING ¾ ZINC-PLATED SHAFT MCMASTER-CARR 98410A128 (89 EA); SNAP SPRING 7/8 OPENING MCMASTER-CARR 3934T14 (3 EA); TAPE VHB 15 MIL X 10 WIDE 72 YD ROLL 3M 4926 (.90 RL); ADHESIVE SEMI STRUCTURAL FLAME RETARDANT JD LINCOLN L-303 REV B (1,320 LY); CORE SPLICE ADHESIVE CYTEC FM 490A.05THK X 1.94 SLIT X 25 FT LG BMS 5-90 TYPE III C1 1 GR 50 REV. P (3,075 (FT); ALODINE TOUCH=N-PREP HENKLE 1132 (11 EA); SEALANT CONDUCTIVE SM-D-947080-25 CHOMERICS 51-01-1035-000 10 OZ KIT (20 EA); BUTYL ¼ X ¼ (39 RL); BUTYL 1/16 X ½ (16 RL); BUTYL 1/16 X ¼ (22 RL); BUTYL 1/16 X ¼ (5 RL) Lot # 02 (Includes 18 Line Items - Original Acquisition Cost 647,186.54) - MAGLOCK PRESSURE RIVET GUN (MGLP B12-12 HOL #88204 (1 EA); AIR RIVAL GUN (HUCK 99-3321-68, HOL #88203 (1 EA); HOT BOND TOOLING FOR 86008010, HOL #88202 (1 EA); HOT BOND TOOLING FOR 86008019, HOL #88201 (1EA); HOT BOND TOOLING FOR 86008020, HOL #88200 (1 EA); DIE #7561 FOR 13017, HOL #88199 (1 EA); DIE #7562, HOL #88198 (1 EA); DIE #7563 FOR 13020, HOL #88197 (1 EA); DOOR TEMPLATE, HOL #88196 (1 EA); MAGLOCK BLIND RIVET INSTALLATION TOOL (MGL 06-752-21), HOLE #88195, QUAL TESTING ROCKET RESTRAINT, HOL #88194 (1 EA); WELD FIXTURE ROCKET SHROUD BASE 50400T15, HOL #88193 (4 EA); WELD FIX TURE ROCKET SHROUD 50400T05, HOL #88192 (4 EA); CRADLE RELOAD #1 (INCLUDES: STEEL CHANNELS, FLANGED SCREW JACK 6" BASES, BRACKET END STEEL CHANNELS, NOTCHED JACK SCREW WITH WING NUTS) (1 EA); CRADLE RELOAD #2, HOL #89004 (1 EA); CRADLE ASSEMBLY RELOAD #3, HOL #89005 (1 EA); CRADLE ASSEMBLY RELOAD #4, HOL #89006 (1 EA); MONGOOSE LAP TOOLING, HOL #89007 (1 EA)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DCMA/DSPPMRO/GEOHD/3059-S0107A/listing.html)
- Place of Performance
- Address: BAE SYSTEMS, 4509 WEST STONE DRIVE, KINGSPORT, Tennessee, 37660, United States
- Zip Code: 37660
- Zip Code: 37660
- Record
- SN02056478-W 20100205/100203234810-04b46d66186f64ea6aae3f92bac1c86a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |