SOURCES SOUGHT
20 -- DRYDOCK OF USCGC TYBEE (WPB-110)
- Notice Date
- 11/16/2009
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- USCGC_TYBEE_WPB-110_DRYDOCK
- Point of Contact
- Nancy M Brinkman, Phone: 757-628-4579
- E-Mail Address
-
Nancy.M.Brinkman@uscg.mil
(Nancy.M.Brinkman@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The United States Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, for Service-Disabled Veteran-Owned Small Business Concerns (SDVOSB) or for Small Business. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. The acquisition is for DRYDOCK repairs to the USCGC TYBEE (WPB-1330) 110-FOOT B CLASS PATROL BOAT. The vessel has a Geographical Restriction of 540 nautical miles one-way or 1080 nautical miles round-trip from its homeport of Woods Hole, MA. All work will be performed at the contractor's facility. The performance period will be FORTY-TWO (42) calendar days with a start date on or about 17 May 2010 through 28 June 2010. The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC TYBEE (WPB-1330) 110-FOOT B CLASS PATROL BOAT. This work will include, but is not limited to: 1. Renew Steel Shell Plating (5-pound) 2. Renew Steel Shell Plating (7.65-pound) 3. Renew Steel Shell Plating (10.2-pound) 4. Renew Steel Structural Plating (5-pound) 5. Renew Steel Structural Plating (7.65-pound) 6. Renew Aluminum Structural Plating 7. Renew Eroded Aluminum Welds 8. Renew Eroded Steel Welds 9. Welding Repairs - Crack (Steel) 10. Welding Repairs - Crack (Aluminum) 11. Perform Steel Structural Member Repairs -1" x 3" Steel T-Bar Framing 12. Clean and Inspect Fuel Service Tanks 13. Clean and Inspect Fuel Stowage and Overflow Tanks 14. Clean and Inspect Oil and Oily Waste Tanks 15. Clean and Inspect Sewage Collection and Holding Tanks 16. Clean and Inspect Grey Water Collection and Holding Tanks 17. Clean Sewage Piping System 18. Clean Grey Water Piping System 19. Preserve Oil and Oily Water Tanks - 100% 20. Preserve Oil and Oily Water Tanks - Partial 21. Preserve Sewage Collection and Holding Tanks - 100% 22. Preserve Sewage Collection and Holding Tanks - Partial 23. Preserve Grey Water Collection and Holding Tanks - Partial 24. Inspect MDE Exhaust System 25. Overhaul Duplex Sea Strainers 26. Renew Sea Valves 27. Overhaul Stabilizing Fins 28. Remove, Inspect, and Reinstall Propellers 29. Remove, Inspect, and Reinstall Propeller Shafts 30. Overhaul Mechanical Shaft Seal Assemblies 31. Renew Water-Lubricated Propeller Shaft Bearings 32. Remove, Inspect and Reinstall Rudder Assemblies 33. Overhaul Steering Gear Components 34. Clean and Inspect Heat Exchangers 35. Modify Exhaust Hangers 36. Repair Propeller Root Erosion 37. Preserve Freeboard - 100% 38. Preserve Underwater Body - 100% 39. Preserve Forward Peak Compartment 40. Renew Speed Doppler and Overhaul Doppler Valve 41. Renew Depth Indicating Transducer 42. Inspect and Maintain Cathodic Protection System 43. Renew Capastic Fairing 44. Routine Drydocking 45. Provide Temporary Logistics 46. Fabricate and Install New Canopy 47. Renew A/C and R/O Sea Chest Piping All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. In accordance with FAR 19.1305, if your firm is HUBZone certified or FAR 19.1404 if your firm is SDVOSB or FAR 19.501 if your firm is a Small Business and intends to submit an offer on this acquisition, please respond by e-mail to Nancy.M.Brinkman@uscg.mil or by fax (757) 628-4676. Questions may be referred to Nancy Brinkman at (757) 628-4579. In response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers. At least two (2) references are requested, but more are desirable. Your response is required by November 30, 2009. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service-Disabled Veteran-owned Small Business set aside or Small Business set aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a HUBZone or SDVOSB small business set aside, or a Small Business set aside, will be posted on the FedBizOps website at http://www.fedbizopps.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/USCGC_TYBEE_WPB-110_DRYDOCK/listing.html)
- Place of Performance
- Address: CONTRACTORS FACILITY, United States
- Record
- SN02004273-W 20091118/091116234802-6e8b6a75809d0b0d2a575e849ce93b7b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |