SOLICITATION NOTICE
41 -- FAN, VANEAXIAL
- Notice Date
- 10/27/2009
- Notice Type
- Presolicitation
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- DEFENSE LOGISTICS AGENCY; DLR PROCUREMENT OPS DSCR-ZBA;3001 STAFF DRIVE; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- SPRTA1-10-R-0097
- Response Due
- 12/14/2009
- Point of Contact
- James Callins, Phone 405-739-8447, Fax - -, Email james.callins@tinker.af.mil
- E-Mail Address
-
James Callins
(james.callins@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20301070370Item: 0001NSN: 4140013701309FWFW FAN, VANEAXIALP/N: 41000448, P/N: 4100044B, Description: Cooling fan for avionics components Length 12.5 Width 8 Depth 7.9 Weight 25 THE AFT FAN ASSY IS A 3.36 HP 22,500 RPM 15 PSI SINGLE STAGE VANE AXIAL FAN CONTAINING A 9 FULL BLADED MIXED FLOW IMPELLER,13 VANE AXIAL FLOW STATOR, AN ANNULAR DIFFUSER,CHECK VALVE IN A DISCHARGE DUCT. ELECTRICAL POWER REQUIRED IS 400 HZ/115 V 2 POLE.OUTPUT CFM IS 1015. THE FAN CIRCULATES AIR THROUGH THE AFT AVIONICS RACK TO PROVIDE COOLING OF RACK MOUNTED LRUS. THE FAN DIRECTS ITS DISCHARGE AIR THROUGH A EGW/AIR HX WHICH COOLS THE AIR PRIOR TO ENTERING THE AVIONICS TO MAINTAIN AVIONICS SUPPLY AIR TEMP AT 35 - 55 DEGREES F. MAX HEAT LOADS FOR AFT RACK ARE RIGHT 4676(HIGH),CENTER 2710(NORM),AND LEFT 3960(LOW).KW MATERIAL: ALUMINUM ALLOY OVERALL IS THE GENERAL MATERIAL.Quantity: 10.0000 EAApplicable to: B-2 EHFDestn:,,.,00000. Delivery: TBD, 10.00 This item was last purchased on order 0004 on contract FA8103-08-D-0033. Duration of Contract Period: THROUGH 2012 Electronic procedure will be used for this solicitation. To: HAMILTON SUNDSTRAND CORPORATION, SAN DIEGO, CA.,92123-1606. IAW FAR 5.207(c)(15)(ii), All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency IAW 5.207(C)(14) The intended source for this requirement is Hamilton Sundstrand Corporation. The drawing for this item is a source controlled drawing in which the part must be acquired from amanufacturing source specified on the source control or selected item drawing, there do not appear to be any immediate actions which could betaken to develop future competition. Currently Hamilton Sundstrand is the only known source that can satisfy the Government's requirement.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/SPRTA1-10-R-0097/listing.html)
- Record
- SN01993076-W 20091029/091027235216-a68566b899d052d643f6922d202f7a55 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |