SOLICITATION NOTICE
28 -- HUB,COMPRESSOR,AIRC
- Notice Date
- 10/23/2009
- Notice Type
- Presolicitation
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- DEFENSE LOGISTICS AGENCY; DLR PROCUREMENT OPS DSCR-ZBA;3001 STAFF DRIVE; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- SPRTA1-10-R-0086
- Response Due
- 10/23/2009
- Point of Contact
- Rhonda White, Phone 405-734-8110, Fax - -, Email rhonda.l.white@tinker.af.mil
- E-Mail Address
-
Rhonda White
(rhonda.l.white@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20301070319Item: 0001NSN: 2840011606505RVRV HUB,COMPRESSOR,AIRCP/N: 698998, Description: Dimensions: The Hub Compressor is 18.804 inches in diameter on the forward end and 5.495-5.500 inches in diameter on the aft end. Material is AMS 5660- Nickel Alloy. The Hub compressor is circualr in design with a bearing journal (shaft) on the aft end. Function: This item provides a mounting point that holds the bearings and supports the compressor.Quantity: 7.0000 EA Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 30 SEP 2011, 7.00 Electronic procedure will be used for this solicitation. IAW FAR 5.207(c)(15)(ii), All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency SynopsisFD2030-10-70319 1.Estimated issue date 16 Nov 09 and estimated closing/response date 16 Dec 09. 2.RFP #: SPRTA1-10-R-0086 3.PR#: FD2030-10-70319 4.Nomenclature/Noun: HUB, COMPRESSOR, AIRC 5.NSN: 2840-01-160-6505RV 6.PN: 698998 7.Application (Engine or Aircraft): TF33 8.AMC: 3/V 9.History: Previously purchased 14 each from West-Hem Aircraft Supplies, Inc., on contract FA810404C0091 on 6 May 04. 10.Description/Function: This item attaches to the rear of the low speed compressor and attaches it to the low speed turbine shaft. 11.Dimensions: Approximately 18.8060 inches in length, 18.8060 inches in width and 16.5050 inches in height and 15 lbs in weight. 12.Material: AMS 5660 Nickel Alloy 13.Qualified Sources: United Technologies Corp. (Cage Code 52661). 14. Qualification requirements are applicable. 15.First Article required unless contract meets waiver criteria 16.Export Control does not apply. 17.Award of a range contract is anticipated with the following Best Estimated Quantities: Minimum Quantity = 1; Maximum Quantity = 11. Required Delivery: 7 each on or before 30 Sep 2011. Destination: USAF 18.Mandatory Language: Written procedures will be used for this solicitation. Authority: 10 U.S.C. 2304(c) (1), Justification: supplies (or Services) required are available from only or a limited number of responsible sources(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. The solicitation will identify the office where additional information can be obtained concerning qualifications requirements as cited in each individual solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ombudsman at (405) 736-8253. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. For qualification information/source approval request contact the buyer listed below at (405)734-8114 or Rhonda.L.white@tinker.af.mil. Note: Faxed solicitation requests can be submitted to DLA DSCR-ZBAB, Tinker AFB, OK 73145, FAX NUMBER (405) 734-8106. 19.UID: If unit price exceeds $5,000.00 then UJID requirements will apply. 20. Small Business Set Aside: N/A 21.The Government currently intends to price and award this requirement under Pratt and Whitney Corporate Contract, SPM400-01-D-9405.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/SPRTA1-10-R-0086/listing.html)
- Record
- SN01991446-W 20091025/091023235410-b9df76edeeb12d3d334992a66aa115cc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |