SOLICITATION NOTICE
J -- DD USCGC Hammer (WLIC-75302)
- Notice Date
- 10/20/2009
- Notice Type
- Cancellation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- DD_USCG_Hammer_FY10
- Point of Contact
- Tracey M. Strawbridge, Phone: 7576284657
- E-Mail Address
-
tracey.strawbridge@uscg.mil
(tracey.strawbridge@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The United States Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, for Service-Disabled Veteran-Owned Small Business Concerns (SDVOSB) or for Small Business. The estimated value of this procurement is between $500,000 and $1,000,000. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. The acquisition is for DRYDOCK repairs to the USCGC HAMMER (WLIC-75302), a 75 FOOT CONSTRUCTION BUOY TENDER which is home ported in Mayport, Florida. The contractor shall perform all work at the Contractor's facility. The performance period will be One hundred thirty-one (131) calendar days with a start date on or about 8 February 2010. The scope of the acquisition is for the following aboard the USCGC HAMMER (WLIC-75302): 1)Perform Ultrasonic Thickness (UT) Measurements 2)Perform Ultrasonic Thickness Measurements – Underwater Hull Plating - Tender 3)Perform Ultrasonic Thickness Measurements – Underwater Hull Plating - Barge 4)Clean and Inspect Fuel Stowage and Overflow Tanks 5)Clean and Inspect Sewage Collection and Holding Tanks 6)Renew Depth Indicating Transducer(s) 7)Renew Sea Valves 8)Renew Firemain Valves - Tender 9)Renew Bilge Valve - Tender 10)Clean and Inspect Sea Strainers - Barge 11)Clean and Inspect Sea Strainers - Tender 12)Protect Hydraulic ATON Crane 13)Preserve Spud and Spud Well Surfaces 14)Clean Grey Water Piping System 15)Clean & Repair Sewage Piping System 16)Inspect Various Deck Fittings 17)Preserve Buoy Deck 18)Preserve Underwater Body (Barge) – “100%” 19)Preserve Underwater Body – “100%” 20)Preserve Barge Freeboard – 100% 21)Preserve Tender Freeboard – 100% 22)Renew Cathodic Protection System - Barge 23)Renew Cathodic Protection System – Tender 24)Routine Drydocking - Tender 25)Routine Drydocking - Barge 26)Provide Temporary Logistics 27)Install Ballast Ingots in Aft Steering Lazarette Space 28)Upgrade Steering System 29)Propulsion System Upgrade 30)Renew Structural Closures (Barge) 31)Renew Various Stuffing Tubes 32)Renew Windows 33)Renew Pilot House Windshield 34)Preserve Bilge Surfaces - Barge 35)Renew Structural Framing - Barge 36)Renew Jetting Pump Mounting Plate 37)Install New Deck Covering System 38)Install New Deck Covering System(s) All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. At the present time, this acquisition is expected to be issued Full and Open with no set aside. However, in accordance with FAR 19.1305, if your firm is HUBZone certified, or 19.1404 a SDVOSB, or 19.501 a Small Business and intends to submit an offer on this acquisition, please respond by e-mail to tracey.strawbridge@uscg.mil or by fax (757) 628-4676. Questions may be referred to Tracey Strawbridge at (757) 628-4657. In response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers. At least two (2) references are requested, but more are desirable. Contractors are reminded that should this acquisition become a HUBZone set aside, SDVOSB Small Business or Small Business set aside, FAR 52.219-3, Notice of Total HUBZone Set-Aside or 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside or 52.214-6, will apply, which requires that at least fifty (50) percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small business concerns. Your response is required by 30 October 2009 at 11:00 AM EST. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service-Disabled Veteran-owned Small Business set aside or Small Business set aside. Failure to submit all information requested may result in a small business set-aside. A decision on whether this will be pursued as a HUBZone or SDVOSB small business set aside, or a Small Business set aside, will be posted on the FedBizOps website at http://www.fedbizopps.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/DD_USCG_Hammer_FY10/listing.html)
- Place of Performance
- Address: Contractor's Facility, United States
- Record
- SN01988662-W 20091022/091020235345-2bcb49097062b92135a9ce561c7fd5c3 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |