SOLICITATION NOTICE
38 -- TORO DINGO TX525 or Equal
- Notice Date
- 9/10/2009
- Notice Type
- Presolicitation
- Contracting Office
- IMR - CANY - Canyonlands National Park 2282 S. West Resource Blvd. Moab UT 84532
- ZIP Code
- 84532
- Solicitation Number
- Q1343090825
- Response Due
- 9/22/2009
- Archive Date
- 9/10/2010
- Point of Contact
- William M. Spigel Contract Specialist 4357192114 bill_spigel@nps.gov;
- E-Mail Address
-
Point of Contact above, or if none listed, contact the IDEAS EC HELP DESK for assistance
(EC_helpdesk@NBC.GOV)
- Small Business Set-Aside
- N/A
- Description
- TORO Dingo TX525 or equal Hydraulic Walk Behind Tracked Compact Utility Loader needed for purchase to conduct trail work located at Arches National Park. The piece of equipment shall meet all performance characteristics essential to meeting the Government's requirements. The mini loader must be diesel, rubber tracked and provide less then 3.5 psi of ground pressure per track. Be less then 41''wide and 72'' long without attachments. The machine must be able accept a variety of hydraulic attachments using quick connects and twist pins and deliver at least 24 hp to these attachments. Must contain a 6gal.+ fuel capacity and have a forward travel speed of 4.5 mph. The rated operating capacity must be at least 790lbs. and have a tip capacity of 1580lbs. Must have 13.8gpm hydraulic flow rate to the auxiliary attachments and 16.9gpm of flow to each track. Machine must be equipped with a ride on tip-up platform (no dolly wheel). Machine should have a simple two control system which operates all traction and loader functions. All attachments must be compatible with the twist pin quick connector system. Attachments needed: 1. Standard Bucket - holds 4.3 cubic feet 42'' width. 2. Leveler -36''length / 49'' width 170lbs. 3. Adjustable Forks - lift capacity 335lbs. 4. Multi-Purpose Tool - 3 tools in one, ripper, tow bar, & boom. 5. Tubby Attachment - able to fit through a 46''opening,hauls 1 cubic yd. and has dumping ability. 6. Mini Compaction Plate - 41in.X18in. / 5500 vertical force, weigh no more than 519lbs. Equipment is to be new. Used or remanufactured equipment is not acceptable. This is a Commercial Item acquisition Request for Quote. This solicitation will be available at http://ideasec.nbc.gov on or about September 11, 2009. PAPER COPIES OF THIS SOLICITATION WILL NOT BE ISSUED AND TELEPHONE REQUESTS OR FAX REQUESTS FOR THIS SOLICITATION WILL NOT BE ACCEPTED. You must download the Solicitation and return a hard copy response. Include cut sheets with your quote. It is mandatory that all contractors register in the Central Contractor Registration database (www.ccr.gov) prior to award. The solicitation is a Request for Quote (this announcement is not the Solicitation). The point of contact for this solicitation is Bill Spigel, Contract Specialist, Canyonlands National Park, Moab, UT. Email address is bill_spigel@nps.gov and the voice telephone is 435-719-2114. Questions must be in writing and sent to bill_spigel@nps.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/NPS/APC-IS/Q1343090825/listing.html)
- Record
- SN01948849-W 20090912/090911000303-8889158c8f658ad984b386bdc33e3bc7 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |