SOLICITATION NOTICE
16 -- Repair Floor Assembly - Wage Determination
- Notice Date
- 9/2/2009
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer, USCG Aviation Logistics Center, HU25, HH65, H60J, C130, ESD, IOD, ISD, CASA or ALD, Elizabeth City, North Carolina, 27909-5001, United States
- ZIP Code
- 27909-5001
- Solicitation Number
- HSCG38-09-Q-S00094
- Archive Date
- 9/23/2009
- Point of Contact
- Tamela S. Bunting, Phone: 252-335-6815
- E-Mail Address
-
Tamela.S.Bunting@uscg.mil
(Tamela.S.Bunting@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- Wage Determination This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. The U.S. Coast Guard (USCG), Aviation Logistics Center (ALC), Medium Range Recovery (MRR) Contracting Branch intends to issue a Firm Fixed Price Purchase Order using the procedures of FAR Part 12 and Part 13. This Request for Quote HSCG38-09-Q-S00094 incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-36. This announcement constitutes the only solicitation; firm-fixed-price quotes for the following item(s) are being requested and a written solicitation will not be issued. The North American Industry Classification System Code is 336413 and the size standard is 1000 employees. This is an unrestricted procurement. In accordance with FAR 6.302-1(a)(2), the U.S. Coast Guard Aviation Logistics Center (ALC) plans to award one (1) purchase order and negotiate only with Helicomb International (Cage Code 6W159). All responsible sources may submit offers which shall be considered by the agency. Schedule of Supplies/Services Description 1. Repair Floor Assembly Qty 2 Each P/N: 70204-82014-045NSN: 1560-01-HR2-2515 Required Delivery: 30 days ARO 2. Repair Floor Assembly Qty 3 Each P/N: 70204-82016-047NSN: 1560-01-HR2-2518 Required Delivery: 30 days ARO STATEMENT OF WORK 1. Components furnished hereunder shall be returned by the contractor in an airworthy condition and in all respects suitable for installation in U.S. Coast Guard (USCG) aircraft. Certification and documentation requirements apply. 2. Components shall be serviced/modified in accordance with Federal Aviation Regulation Parts 43 and 145 or alternate standard approved in writing by the Engineering Division, USCG Aviation Logistics Center (ALC). 3. A DD Form 1577-2, Unserviceable (Repairable) Tag-Material, or a CG-1577-A (11-90), Unsatisfactory Report Tag, will be attached to each Not Ready for Issue (non-RFI) component describing faults. Components shall be reworked/overhauled to correct the specific fault(s) identified. 4. The contractor shall also perform a visual and technical inspection in accordance with the current applicable Component Maintenance Manual (CMM) and correct all additional deficiencies found. This shall include replacement of broken parts and the removal of any foreign matter or corrosion. 5. Components returned for rework shall be overhauled when the Time-Since-Overhaul (TSO) is equal to or greater than 60% of the scheduled Time-Between-Overhaul (TBO) recommended by the Original Equipment Manufacturer (OEM). However, in no case shall the price specified on the order be exceeded without written authorization from the Contracting Officer. 6. Corroded parts shall be replaced, except in those cases where removal of corrosion from a part will not impair the efficiency or safe operation of the part. Corrosion removal and treatment of affected areas will be accomplished in accordance with the OEM specifications (or best commercial practices if not addressed by the OEM). 7. Replacement Parts. Parts found to be defective shall be replaced as specified in the OEM's current procedures or as otherwise authorized in writing by ALC Engineering Division. Replacement parts shall be new. 8. ALC considers components ready for issue (RFI) upon acceptance. Components determined to be non-RFI upon installation may be returned to the contractor with deficiencies described in a Quality Deficiency Report (QDR). 9. Services shall be performed only by Federal Aviation Administration (FAA) AND OEM approved OR USCG-approved contractors. USCG approval must be in writing and be available upon request from the Contracting Officer. The contractor shall: - Comply with the certification/documentation requirements specified herein. - Attach certifications/documentation to the outside of the shipping container. - Attach a copy of same to the invoice. ALC "NSN" assigned to a part number/item(s) which contains any Alpha characters (HS1, HR2 etc) is not an NSN (National Stock Number) but is a LSN (Local Stock Number) assigned to the part number for ALC supply tracking purposes. The USCG does not own specifications, plans, and drawings and no other technical data will be included in this solicitation. All responsible sources may submit an offer for quantities listed or quantity price breaks which shall be considered by the agency. PACKAGING AND MARKING: Packaging, packing, and preservation shall be in accordance with ASTM D3951-98 (Re-approved 2004) Standard Practice for Commercial Packaging. Each package shall be individually labeled on the outside with Nomenclature, Quantity, Purchase Order Number, and Line Item Number. The internal packaging material shall be sufficient to prevent damage during shipment, handling, and storage. Delivery shall be to Commanding Officer, Aviation Logistics Center, Elizabeth City, NC 27909. INSPECTION and ACCEPTANCE shall be performed by Receiving. Copies of packing slips shall be affixed to the outside of the shipping container. Each item or unit must be individually packed in a separate box, carton, or crate. Each individual container shall be labeled on the outside with NSN, Part Number, Serial Number, Quantity, Nomenclature, Purchase Order Number, and Line Item. Bar coding is authorized but not required. Offers shall be able to provide necessary certifications including traceability to the OEM to ensure parts are in airworthy condition, suitable for installation on an U.S. Coast Guard aircraft. FAR 52.212-1 Instructions to Offerors - Commercial Items (Jun 2008) is tailored as follows: The following FAR provisions and clauses apply to this request for quotation and are incorporated by reference: FAR 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a solicitation provision may be accessed electronically at these addresses: www.deskbook.Osd.mil or www.arnet.gov/far. 52.211-14 Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program (APR 2008); DO-A1 (rating). 52.215-20 Alt IV Requirements for Cost or Pricing Data or Information Other Than Cost or Pricing Data (Oct 1997) (a) Submission of cost or pricing data is not required (b) Provide information on the prices at which same or similar items have been sold in the commercial market that is adequate for evaluating the reasonableness of the price for this acquisition if requested. 52-247-45 F.o.b. Origin and/or F.o.b. Destination Evaluation (Apr 1984). FAR 52.212-2 Evaluation—Commercial Items (Jan 1999) will not be used. The following will be used to evaluate quotes. The Coast Guard will evaluate quotations and make an offer resulting from this solicitation to the responsible vendor whose quote conforms to the solicitation and is determined to be most advantageous to the Government based on the ability to meet basic requirements, delivery, price and consideration of past performance. The contractor shall provide references from two (2) past performances where requirements are directly related to this procurement. FAR 52.212-3 Offeror Representations and Certifications-Commercial Items (Aug 2009) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (m) of this provision. FAR 52.212-4 Contract Terms and Conditions-Commercial Items (Mar 2009) is tailored as follows: Addendum to 52.212-4 Contract Terms and Conditions-Commercial Items. 52.252-2 Clauses Incorporated by Reference (FEB 1998). This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also the full text of the clause may be accessed electronically at Internet address http://acquisition.gov/far/index.html. FAR 52.211-15 Defense Priority and Allocation Requirement (Apr 2008); DO-A1 (rating) FAR 52.246-15 Certificate of Conformance; (Apr 1984); CERTIFICATION AND DOCUMENTATION REQUIREMENTS. 1. The contractor shall provide documentation to verify that they have OEM AND FAA approval OR USCG approval to service the component. 2. The contractor shall provide an airworthiness certificate (FAA Form 8130-3 or alternate approved by ALC Engineering) for each component. The certificate must be signed and dated by an authorized representative of the approved repair station. 3. A Certificate of Conformance in accordance with Federal Acquisition Regulation 52.246-15 shall be provided for each component. FAR 52.246-15 Certificate of Conformance (APR 1984) (a) When authorized in writing by the cognizant Contract Administration Office (CAO), the Contractor shall ship with a Certificate of Conformance any supplies for which the contract would otherwise require inspection at source. In no case shall the Government's right to inspect supplies under the inspection provisions of this contract be prejudiced. Shipments of such supplies will not be made under this contract until use of the Certificate of Conformance has been authorized in writing by the CAO, or inspection and acceptance have occurred. (b) The Contractor's signed certificate shall be attached to or included on the top copy of the inspection or receiving report that is distributed to the payment office. It may also be attached to the CAO copy when contract administration (Block 10 of the DD Form 250) is performed by the Defense Contract Management Agency. In addition, a copy of the certificate shall also be attached to or entered on copies of the inspection or receiving report accompanying the shipment. (c) The Government has the right to reject defective supplies or services within a reasonable time after delivery by written notification to the Contractor. The Contractor shall in such event promptly replace, correct, or repair the rejected supplies or services at the Contractor's expense. (d) The certificate shall read as follows: "I certify that on ________________ [insert date], the _________________________ [insert Contractor's name] furnished the supplies or services called for by Contract No. ___________________________ via ________________________[Carrier] on __________________________ [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification [part number], and are in the quantity shown on this or on the attached acceptance document. Date of Execution: __________________________________________________________ Signature:___________________________________________________________________ Title:_______________________________________________________________________" 4. A copy of the contractor's work order, listing all replacement parts in part number order, shall be provided for each component. 5. The contractor shall maintain a copy of replacement part certification documentation for inspection by the Government for a minimum of 24 months after delivery. Department of Labor Wage Determination No. 1999-0316 Revision 28 dtd 5/26/09 is applicable and attached as separate document. Homeland Security Acquisition Regulation (HSAR) 3052.209.70 / 48 CFR 3009.104-75 Prohibition on contracts with corporate expatriates (Jun 2006). (a) Prohibitions. Section 835 of the Homeland Security Act, 6 U.S.C. 395, prohibits the Department of Homeland Security from entering into any contract with a foreign incorporated entity which is treated as an inverted domestic corporation as defined in this clause, or with any subsidiary of such an entity. The Secretary shall waive the prohibition with respect to any specific contract if the Secretary determines that the waiver is required in the interest of national security. (b) Definitions. As used in this clause: Expanded Affiliated Group means an affiliated group as defined in section 1504(a) of the Internal Revenue Code of 1986 (without regard to section 1504(b) of such Code), except that section 1504 of such Code shall be applied by substituting `more than 50 percent' for at least 80 percent each place it appears. Foreign Incorporated Entity means any entity which is, or but for subsection (b) of section 835 of the Homeland Security Act, 6 U.S.C. 395, would be, treated as a foreign corporation for purposes of the Internal Revenue Code of 1986. Inverted Domestic Corporation. A foreign incorporated entity shall be treated as an inverted domestic corporation if, pursuant to a plan (or a series of related transactions)— (1) The entity completes the direct or indirect acquisition of substantially all of the properties held directly or indirectly by a domestic corporation or substantially all of the properties constituting a trade or business of a domestic partnership; (2) After the acquisition at least 80 percent of the stock (by vote or value) of the entity is held— (i) In the case of an acquisition with respect to a domestic corporation, by former shareholders of the domestic corporation by reason of holding stock in the domestic corporation; or (ii) In the case of an acquisition with respect to a domestic partnership, by former partners of the domestic partnership by reason of holding a capital or profits interest in the domestic partnership; and (3) The expanded affiliated group which after the acquisition includes the entity does not have substantial business activities in the foreign country in which or under the law of which the entity is created or organized when compared to the total business activities of such expanded affiliated group. Person, domestic, and foreign have the meanings given such terms by paragraphs (1), (4), and (5) of section 7701(a) of the Internal Revenue Code of 1986, respectively. (c) Special rules. The following definitions and special rules shall apply when determining whether a foreign incorporated entity should be treated as an inverted domestic corporation. (1) Certain Stock Disregarded. For the purpose of treating a foreign incorporated entity as an inverted domestic corporation these shall not be taken into account in determining ownership: (i) Stock held by members of the expanded affiliated group which includes the foreign incorporated entity; or (ii) stock of such entity which is sold in a public offering related to the acquisition described in subsection (b)(1) of Section 835 of the Homeland Security Act, 6 U.S.C. 395(b)(1). (2) Plan Deemed In Certain Cases. If a foreign incorporated entity acquires directly or indirectly substantially all of the properties of a domestic corporation or partnership during the 4-year period beginning on the date which is 2 years before the ownership requirements of subsection (b)(2) are met, such actions shall be treated as pursuant to a plan. (3) Certain Transfers Disregarded. The transfer of properties or liabilities (including by contribution or distribution) shall be disregarded if such transfers are part of a plan a principal purpose of which is to avoid the purposes of this section. (d) Special Rule for Related Partnerships. For purposes of applying section 835(b) of the Homeland Security Act, 6 U.S.C. 395(b) to the acquisition of a domestic partnership, except as provided in regulations, all domestic partnerships which are under common control (within the meaning of section 482 of the Internal Revenue Code of 1986) shall be treated as a partnership. (e) Treatment of Certain Rights. (1) Certain rights shall be treated as stocks to the extent necessary to reflect the present value of all equitable interests incident to the transaction, as follows: (i) warrants; (ii) options; (iii) contracts to acquire stock; (iv) convertible debt instruments; and (v) others similar interests. (2) Rights labeled as stocks shall not be treated as stocks whenever it is deemed appropriate to do so to reflect the present value of the transaction or to disregard transactions whose recognition would defeat the purpose of Section 835. (f) Disclosure. The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of provision) FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Items (August 2009) [Contracting Officer check as appropriate.] X (18) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2009) (15 U.S.C. 632(a)(2)). The following language applies: (g) If the Contractor does not have representations and certifications in ORCA, or does not have a representation in ORCA for the NAICS code applicable to this contract, the Contractor is required to complete the following representation and submit it to the contracting office, along with the contract number and the date on which the representation was completed: The Contractor represents that it 0 is, 0 is not a small business concern under NAICS Code _________________ assigned to contract number ______________________. [Contractor to sign and date and insert authorized signer’s name and title]. X (19) 52.222-3, Convict Labor (June 2003) (E.O. 11755). X (20) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Aug 2009) (E.O. 13126). X (21) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). X (22) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). X (24) 52.222-36, Affirmative Action for Workers with Disabilities (Jun 1998) (29 U.S.C. 793). X (34) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). X (39) 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). X (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). _X_ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). This clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332. This Statement is for Information Only: It is not a Wage Determination Employee ClassMonetary Wage -- Fringe Benefits Aircraft Mechanic WG8-WG10 $18.00 - $19.89 Fiberglass/Plastics Worker WG8-WG10 $18.00 - $19.89 (End of clause) The closing date for receipt of quotes is September 8, 2009 at 10:00 am EDT. Anticipated award date is no later than September 18, 2009. Quotes are to remain effective for 60 days after close of solicitation. Offers may be submitted on company letterhead stationery and must include the following information: Solicitation Number, Nomenclature, Part Number, FOB point, Unit Price, Extended Price, Payment Terms and discount offered for prompt payment, the business size standard and any minority classification; delivery date, and Representation and Certifications contained in FAR Clause 52.212-3, including Alternate 1. Facsimile quotes are acceptable and may be forwarded via fax number 252-335-6790. Point of contact is Tammy Bunting, phone 252-335-6815, and email: Tamela.S.Bunting@uscg.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGARSC/HSCG38-09-Q-S00094/listing.html)
- Place of Performance
- Address: USCG, ALC, Elizabeth City, North Carolina, 27909, United States
- Zip Code: 27909
- Zip Code: 27909
- Record
- SN01937873-W 20090904/090903001043-bcffa20e8d77be62e69c3c8f1d999c10 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |