MODIFICATION
95 -- Aluminum Armor Plate
- Notice Date
- 8/4/2009
- Notice Type
- Modification/Amendment
- NAICS
- 331315
— Aluminum Sheet, Plate, and Foil Manufacturing
- Contracting Office
- Department of the Army, U. S. Army Materiel Command, RDECOM Acquisition Center - Adelphi, RDECOM Acquisition Center - Adelphi, ATTN: AMSRD-ACC, 2800 Powder Mill Road, Adelphi, MD 20783-1197
- ZIP Code
- 20783-1197
- Solicitation Number
- W911QX09T0193
- Response Due
- 8/7/2009
- Archive Date
- 10/6/2009
- Point of Contact
- Bonita Zander, 410-278-5601<br />
- E-Mail Address
-
RDECOM Acquisition Center - Adelphi
(bonita.zander@arl.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The purpose of this amendment is to answer the following questions: Question 1. Is the aluminum plate machined parts or just raw material that you are looking for? We machine large Ballistic Armor plates for TACOM, BAE, IMG, etc. Can we get part prints for this if it involves machining? Answer: These are simply aluminum plates. The thickness, width and length are the only important features being requested. Question 2. The spec for the 6061 plate indicates that the plate needs to be ballistically tested as follows: 4.7.3.1 Ballistic testing facility. Unless otherwise specified in the contract or purchase order (see 6.2), the ballistic test plates shall be forwarded to the Commander, USA ATC, ATTN: CSTE-DTC-AT-SL-V, Building 358, 400 Colleran Road, APG, MD 21005-5059 for ballistic testing for first article or lot acceptance. Is that done free of charge at APG? I believe that it is - if you have a gov. PO#. Which we would have in this case. If you can confirm that, that would be great. Answer: The vendor must supply ballistic testing certification. An additional charge to the Government for this certification is not acceptble. ATC is not associated with this purchase so ballistic testing certifications will not go to ATC, they need to come to ARL. The closing date has been extended to 7 August 2009 by 11:59 PM Eastern Standard Time.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/USAMC/DAAD17/W911QX09T0193/listing.html)
- Place of Performance
- Address: RDECOM Acquisition Center - Adelphi Bldg 434 Aberdeen Proving Gro MD<br />
- Zip Code: 21005<br />
- Record
- SN01899549-W 20090806/090805001357-348bf9728333b1863295edd8a31a82d6 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |