SOLICITATION NOTICE
99 -- Replace Loading Dock Levelers, Compression Seals and Bumper Guards at Building 4514 Bolling AFB DC
- Notice Date
- 7/24/2009
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 238990
— All Other Specialty Trade Contractors
- Contracting Office
- Department of the Air Force, Direct Reporting Unit - Air Force District of Washington, 11 CONS, 20 MacDill Blvd Suite 400, Bldg P20, Bolling AFB, District of Columbia, 20032, United States
- ZIP Code
- 20032
- Solicitation Number
- FA7012-09-T-0067
- Archive Date
- 8/13/2009
- Point of Contact
- Jerome D. Brown, Phone: 202-767-8100, Maria B Williams, Phone: 202-767-8103
- E-Mail Address
-
jerome.brown@afncr.af.mil, maria.williams@bolling.af.mil
(jerome.brown@afncr.af.mil, maria.williams@bolling.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.603, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, and written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are in effect through Federal Acquisition Circular (FAC) 2005-33. This is a 100% Small Business Set-Aside. The North American Industry Classification Code (NAICS) is 238990 at $14M. Work shall be in accordance with the following Performance Work Statement (PWS). Contractors shall bid each line item as an all inclusive. LINE ITEM 0001: Remove and Install New Loading Dock levelers at Building 4514. LINE ITEM 0002: Remove and Replace Compressions Seals/Bumper Guards at Building 4514. 1. DESCRIPTION OF SERVICES: The contractor shall provide all personnel, labor, equipment, tools, materials, transportation, supervision, management, and other items and services necessary to replace the existing loading dock levelers, compression seals and bumper guards at building 4514, Bolling Air Force Base, Washington DC. 1.1 SCOPE OF WORK: The following work description shall serve as general information only and shall not limit the contractor's responsibility or obligations to conform to all local, state, and federal laws as well as manufacturer's recommendations. All quantities and measurements in this Performance Work Statement are approximate and should be verified by the contractor. 1.1.1 The Contractor shall remove and properly dispose of three existing dock levelers, compression dock seals, header pad dock seals, and loading dock bumpers at three (3) individual loading docks locatged at Building 4514. 1.1.1.1 Each existing dock leveler is approximately 6' x 10'. 1.1.1.2 Each existing header pad dock seal is approximately 1Ft (wide) by 11 ft (tall) by 1 Ft (in depth). 1.1.1.3 Each existing header pad dock seal is approximately 8ft (wide) by 2 ft (tall by 1 ft (in depth). 1.1.1.4 Each existing bumper guard/loading dock bumper is approximately 1 ft (wide) by 10 in (tall) by 41/2 in (in depth). 1. 1.2 The Contractor shall install new manual dock levelers, compression dock seals, header pad dock seals, and loading dock bumper guards at the same eight (8) individual loading docks located at Building 4514. The contractor shall ensure that the new protective equipment is anchored securely to the facility. 1.1.2.1 The approximate size of each loading dock door opening is 8ft (wide) by 9ft (tall). 1.1.2.2 The new compression dock seals and header seals shall be made of 40 oz. Duroprene. 1.1.2.3. Each loading dock bumper guard shall be made of laminated rubber and be metal reinforced. 1.1.2.4 The newly installed compression dock seals, header pad dock seals, and loading dock bumper guards shall be approximately the same dimensions as the equipment previously removed. 1.1.2.5 The newly installed protective equipment shall also provide full load access as well an effective weather seal. 1.1.3 The contractor shall provide to the QAP all specifications for the dock levelers, compression seals, header pads seals, and laminated rubber bumper guards to be used for services provided at the loading docks located at Building 4514. 1.1.4 All areas disturbed and damaged as a result of contractor actions will be repaired to its original condition by the contractor with no expense to the government. 1.1.5 Properly removed and dispose of all debris, associated with the services provided in the replacing of the loading dock levelers, compression seals and bumper guards at Building 4514 at a location outside of Bolling AFB. Disposal shall meet all federal, state, and local laws. 1.1.6 All work and material will be in accordance with Occupational Safety & Health Administration (OSHA) requirements/standards within all the latest additions. 1.1.7 All work shall meet industry standards. 1.1.8 The work schedule shall be coordinated with Civil Engineer Squadron's Quality Assurance Personnel, prior to start of work. 1.1.9 Contractor shall provide a breakdown of their labor and material with the submission of their proposal for this project. 1.1.10 Contractor shall also provide past performance information that is relevant to this requirement. 1.2 CONTRACTOR REQUIREMENTS: The Contractor shall provide supervision that is experienced and fully qualified. The supervisor shall maintain direct control and close surveillance of all contract personnel who are performing the installation of all equipment identified in this contract. Supporting documentation of each employee classification/certification used on this contract shall be made available upon request. 1.3 PRE-INSTALLATION REQUIREMENTS: Before project start, the contractor shall inspect the work site and ascertain all information necessary to deliver complete performance of services. The contractor shall notify the Contracting Officer of any conditions that prevent the completion of these services. 1.4 SAFETY: The Contractor shall be responsible for all means and methods as they relate to safety and shall comply with all local, state, and federal requirements. All personnel shall be instructed to be mindful of maintaining a safe environment for the facility occupants. 1.5 GOVERNMENT REMEDIES: The Contracting Officer shall enforce corrective measures in accordance with applicable policies and procedures for contractor's failure to perform satisfactory services or failure to correct non-conforming services. 1.6 HOURS OF OPERATION: Normal duty hours are from 0700 to 1600 hours Monday through Friday. The contractor shall perform the services required under this contract during the following hours: 0700-1600 Monday through Friday. The contractor will be required to meet with the government within 48 hours after contract award to establish a work schedule. 1.7 FEDERAL HOLIDAYS: The following is a list of Federal Holidays observed by this installation. If the holiday falls on a Saturday, the preceding Friday is observed as the holiday. If the holiday falls on a Sunday, the following Monday is observed as the holiday. Normal work operations, which fall on a government holiday, shall be performed the next business work day. New Years Day, Independence Day, Thanksgiving Day, Martin Luther King Jr. Birthday, Veterans Day, Christmas, President's Day, Labor Day, Inauguration Day, Memorial Day, Columbus Day. 1.8 SECURITY REQUIREMENTS: All personnel employed by the contractor in the performance of this contract, or any representative of the contractor entering Bolling Air Force Base, shall abide by all security regulations of the installation. 1.8.1 BASE ACCESS: The contractor shall obtain personnel identification passes for all employees and vehicle passes for all contractor and personal vehicles entering Bolling AFB. The contractor shall submit a master personnel roster on company letterhead to the Contracting Officer. The master roster shall include all personnel working on the contract in alphabetical order to include, full name, date of birth, social security number, and driver's license number with its state of issue. Vehicle registration, proof of insurance and a valid driver's license must also be presented for all vehicles when entering the installation. 1.8.1.1 Lost vehicle and entry passes shall be reported immediately to the visitor control center and the Contracting Officer. 1.9 PERFORMANCE OF SERVICES DURING CRISIS DECLARED BY THE NATIONAL COMMAND AUTHORITY OR OVERSEAS COMBATANT COMMANDER IN ACCORDANCE WITH DoDI 3020.37 In the event the contractor is unable to perform their daily operations due to peacetime emergency and/or wartime contingency disturbances, etc., neither the government nor the contractor shall take action for non-compliance with the contract requirements. 1.10 COORDINATION: The point of contact for this project is the 11th Civil Engineer Squadron QAP, Mr. Carl Buono (202) 767-8616. 1.11 QUALITY ASSURANCE: The government shall evaluate the contractor's performance under this contract using the 100% Surveillance method to ensure compliance of all specifications and objectives stated in the Performance Work Statement and Industry Standards. 1.12 WARRANTY: Warranties under this contract shall include standard warranties offered to the general public. The contractor shall be responsible for replacing any warranty items within an appropriate period of such warranty. 2. SERVICE DELIVERY SUMMARY - NA 3. GOVERNMENT FURNISHED PROPERTY AND SERVICES. Water, electrical power, existing facility lighting, and restroom facilities will be made available to the contractor by the government during the performance of their work. All interested contractors are to submit a copy of their quotation by the solicitation due date. FAR PROVISIONS INCORPORATED BY REFERENCE: 52.207-1 Notice of Standard Competition, 52.207-2 Notice of Streamlined Competition, 52.212-1 Instructions to Offerors-Commercial Items. Addendum: Contractors must provide the following information with their proposal packages. 1. Provide a detail Cut Sheet describing the replacement Dock Levelers, Compression Seals and Bumper Guards that will be installed according to the proposal submitted. 2. Provide a cost breakdown for materials and labor for CLIN 0001 & CLIN 0002. 3. Provide Past Performance information relevant to the requirement. 52.212-2 Evaluation-commercial Items and factors are: Technical, Price and Past Performance, 52.215-5 Facsimile Proposals, 52.237-1 Site Visit. FAR PROVISIONS INCORPORATED BY FULL TEXT: 52.212-3 Offeror Representations and Certifications-Commercial Items, 52.219-1 Alt 1 Small Business Program Representations Items, 52.222-22 Previous Contracts and Compliance Reports, 52.222-25 Affirmative Action Compliance, 52.252-1 Solicitation provisions Incorporated by Reference, 52.252-3 Alternations in Solicitation. Offeror must include, with its offer, a completed copy of provision FAR 52.212-3 in full text. FAR CLAUSES INCORPORATED BY REFERENCE: 52.204-7 Central contractor Registration, 52.204-9 Personal Identity Verification of Contractor Personnel, 52.212-4 Contract Terms and Conditions Commercial Items, 52.219-6 Notice of Total Small Business Set Aside, 52.222-3 Convict labor, 52.222-19 Child Labor Cooperation with Authorities and Remedies, 52.222-21 Prohibitions of Segregated Facilities, 52.222-26 Equal Opportunity, 52-222-36 Affirmative Action for Workers with disabilities, 52.222-41 Service Contract Act of 1965, as Amended, 52.223-3 Hazardous Material Identification and Material Safety Data, 52.223-5 Pollution Prevention and Right to Know Information, 52.223-6 Drug-Free Workplace, 52.223-10 Waste Reduction Program,52.223-11 Ozone Depleting Substances, 52.225-13 Restrictions on Certain Foreign Purchases, 52.232-33 Payment by Electronic Funds Transfer Central Contractor Registration, 52.233-1 Disputes, 52.233-3 Protest After Award, 52.233-4 Applicable Law for Breach of Contract Claim, 52.237-1 Site Visit, 52.237-2 Protection of Government Building, Equipment, and vegetation, 52.242-15 Stop-Work Order, 52.246-1 Contractor Inspection Requirements, 52.246-20 Warranty of Services, 52.247-34 FOB Destination, 52.253-1 Computer Generated Forms, 252.212-7001 Contract Terms and Conditions Required to implement Statues or Executive orders Applicable to Defense Acquisitions of Commercial items, 252.223-7001 Hazardous Warning labels, 252.225-7001 Buy American Act and Balance of Payments Program, 252.225-7002 Qualifying Country sources as Subcontractors, 252.232-7003 Electronic Submission of Payment Requests, 252.232-7000 Material Inspection and Receiving Report, 252.247-7006 Removal of Contractor's Employees, 252.247-7007 Liability and Insurance. FAR CLAUSES INCORPORATED BY FULL TEXT: 52.212-5 CONTRACT Terms and Conditions Required to Implement Statutes or Executive orders, 52.219-28 Post -Award Small Business Program Representation, 52.222-42 Statement of Equivalent Rates for Federal Hires, 52.223-11 Ozone-Depleting Substances, 52.252-2 Clauses Incorporated by Reference, 52.252-4 Alterations in Contracts, 252.212-7001 Contract Terms and Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, 5352.201-9101 Ombudsman, 5352.242-9000 Contractor Access to Air Force Installations, 5352.223-9001 Health and Safety on Government Installations. SOLICITATION RESPONSES must be received no later than 12:00 noon Eastern Standard Time 29 July 2009 at 11th Contracting Squadron/LGCF, 20 MacDill Blvd, Suite 247, Bldg P20, and Bolling AFB, DC 20032. (202) 767-7896, or e-mail response to jerome.brown@afncr.af.mil. An official authorized to bind your company shall sign the offer. THERE'S A MAMDATORY SITE VISIT ON 27 JULY 2009, BEGINNING AT 2:00 PM. PLEASE CONTACT: MR. JEROME BROWN, VIA E-MAIL, TO SUBMIT YOUR LIST OF PEOPLE WHO WILL BE ATTENDING, NOT LATER THAN 11:00 A.M. ON 27 JULY 2009. The prevailing wage determination is WD 05-2103 (Revision 7) dated 23 March 2009. The website for this wage determination is http://www.wdol.gov/wdol/scafiles/std/05-2103.txt: To be eligible for an award, all contractors must have a valid registration within the Central Contractor Registration (CCR). Contractors can contact the CCR by calling 1-888-227-2423 or via the internet at www.ccr.gov. The FAR Clause web site is http://farsite.hill.af.mil. Questions concerning this solicitation should be addressed to Mr. Jerome Brown, Contract Specialist, Phone (202) 767-8100, Fax (202) 767-7896, e-mail: jerome.brown@afncr,af.mil or Mrs. Maria Williams, Contracting Officer, Ph (202) 767-8103, Fax (202) 767-7896, e-mail: maria.williams@afncr.af.mil. PLACE OF PERFORMANCE: Building 4514 Bolling AFB, Washington DC.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFDW/AFDW11CONS/FA7012-09-T-0067/listing.html)
- Place of Performance
- Address: Building 4514 Bolling Air Force Base, Washington, District of Columbia, 20032-0101, United States
- Zip Code: 20032-0101
- Zip Code: 20032-0101
- Record
- SN01887257-W 20090726/090725001040-474f8009588fda7e2865197b639771ee (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |