SOLICITATION NOTICE
34 -- HURCO VM10 VERTICAL MACHINING CENTER
- Notice Date
- 7/20/2009
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332111
— Iron and Steel Forging
- Contracting Office
- NASA/Goddard Space Flight Center, Code 210.M, Greenbelt, MD 20771
- ZIP Code
- 20771
- Solicitation Number
- NNG09304779Q
- Response Due
- 8/4/2009
- Archive Date
- 7/20/2010
- Point of Contact
- Rogenia Burton-Pendergast, Simplified Acquisition Specialist, Phone 301-286-7587, Fax 301-286-1720, Email Rogenia.M.Burton-Penderga@nasa.gov - Eric Jackson Newman, Contracting Officer, Phone 301-286-1892, Fax 301-286-1720, Email Eric.J.Newman@nasa.gov<br />
- E-Mail Address
-
Rogenia Burton-Pendergast
(Rogenia.M.Burton-Penderga@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- NASA/GSFC has a requirement for:-Qty:1, Hurco VM10 Vertical Machining center with the following specifications:*X,Y,Z -axis Travel-26" 16" X 20"*Spindle Taper-CAT 40*Spindle Speed-10,000 RPM*Positioning Accuracy= -/+ 0.0002"*Repeatability= -/+ 0.0001"*Number of Tool Stations/tape-20/CAT 40*Conversational and G code programming-2 GB ram memory*600 block look ahead control-Up to 2277 bps processing speed*Flood coolant-Righ and left side work lights*Balanced tool holder set of 10 holders:6"milling vise 8.9" Opening.-Qty:2, WinMax Classic Package to include-advanced graphics verification, ISNC,Mini-Keyboard, and select surface finish quality.-Qty:1, Rigid Tap-Qty:1, Work Light-Qty:1, Hurco Tool Kit 10 Piece-Qty:1, Hurco 6" Vise HV689-Qty:1, Retention Knobs 16 Piece Non-Coolantto include installation and 3-Days Training FOC (1 time). Rigging will be theresponsibility of NASA. Vendor will remove Z-Axis Motor and ATC motor if necessary to fitthrough doorway.This notice is a combined synopsis/solicitation for commercial items prepared inaccordance with the format in FAR Subpart 12.6, as supplemented with additionalinformation included in this notice. This announcement constitutes the onlysolicitation, which is issued as a Request for Quotation (RFQ); quotes are beingrequested and a written solicitation will not be issued. Offerors are required to usethe On-Line RFQ system to submit their quote. The On-line RFQ system is linked above orit may be accessed at http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin=. Theinformation required by FAR Subpart 12.6 is included in the on-line RFQ.The Government intends to acquire a commercial item using FAR Part 12 and the SimplifiedAcquisition Procedures set forth in FAR Part 13.Questions regarding this acquisition must be submitted in writing (e-mail is preferred)no later than July 27, 2009, 4:00pm EST. It is the quoter's responsibility to monitorthis site for the release of any amendments (if any). Potential quoters will beresponsible for downloading their own copy of this notice, the on-line RFQ and amendments(if any). An Ombudsman has been appointed. See NASA Specific Note "B".Any referenced notes may be viewed at the following URLs linked below.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/GSFC/OPDC20220/NNG09304779Q/listing.html)
- Record
- SN01880441-W 20090722/090720234902-f50ee2d6ab95c0c9e9ce96fd5addd7fb (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |