SPECIAL NOTICE
80 -- SEALING COMPOUND - SOP CLAUSES - QUOTE SHEET
- Notice Date
- 6/16/2009
- Notice Type
- Special Notice
- NAICS
- 325520
— Adhesive Manufacturing
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), FAS Heartland Region (6FC and QSDAA), 1500 East Bannister Road, Kansas City, Missouri, 64131, United States
- ZIP Code
- 64131
- Solicitation Number
- 8030-01-322-7275
- Archive Date
- 6/20/2009
- Point of Contact
- Dana M Karlin, Phone: 816-823-2300
- E-Mail Address
-
dana.karlin@gsa.gov
(dana.karlin@gsa.gov)
- Small Business Set-Aside
- N/A
- Description
- QUOTE SHEET SOP CLAUSES QTY: 7 8030-01-322-7275 UI: KT SEALING COMPOUND: DESCRIPTION In accordance with SAE specification AMS 3276E, Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360F (182C) dated March 2008. PRI QPL qualification required. NOTE: Third party inspection certification (NADCAP program) required for this specification. Class B-1/2 - for application by extrusion gun, spatula, or roller; work life 1/2 hr. Size: a kit consisting of 50 gallons base compound and the required amount of curing agent packaged in separate containers. Shelf life code: 3 (9 months) Maximum age on delivery: 2 months ITEM MARKING Each item shall be marked with the following: (1) marking in accordance with SAE Aerospace Standard AS5502, (paragraphs 5.2.1, 5.2.2), and any other specification-unique marking requirements. (2) instructions for use, thinning, mixing, shaking, etc. on unit containers only (3) instructions for storage, i.e. do not freeze, requires refrigeration, etc. (4) if a kit, then each kit component shall be marked with the kit name and component part. (5) manufacturer's name and part number (6) if applicable, the maximum volatile organic compound content (VOC), less water and exempt solvents, in lbs/gl or grams/liter. (7) if the item is on an existing contract, the supplier shall follow the pre-arranged California South Coast Air Quality Management District labeling requirements. PACKAGING The base compound shall be loaded into a new, open-head, 24 gage minimum steel drum of the type normally used for this product. The removable drum head shall have a threaded bung and vent. Sufficient catalyst shall be loaded in a resin-lined, 24 gage minimum steel pail with a bail type handle and removable lid. There shall be no interaction chemically or physically with the contents which would damage the container or alter the strength, quality, or purity of the contents. The base compound and catalyst containers shall be physically connected, attached, or boxed together to prevent separation during shipment, handling, storage, and redistribution and, as a minimum, shall meet the applicable requirements of the National Motor Freight Classification, Uniform Freight Classification, Department of Transportation, and International Maritime Dangerous Goods Code regulations. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with the latest version of FED-STD-123, "Marking For Shipment (Civil Agencies)", or marked and bar coded for delivery to military activities in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/. South Coast Air Quality Management District Provision: If the item is on an existing contract, the supplier shall follow the pre-arranged California South Coast Air Quality Management District labeling requirements. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe). Stacking Strength: The pallet plus the load shall be capable of supporting two additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/GSA/FSS/6FE/8030-01-322-7275/listing.html)
- Record
- SN01846921-W 20090618/090617000552-8bc87668c01c3ee892d783975e0acbc0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |