PRESOL | 65 | Surgical Spotlights - Attachment 1

FBO DAILY ISSUE OF MAY 30, 2009 FBO #2742
SOLICITATION NOTICE

65 -- Surgical Spotlights - Attachment 1

Notice Date: 5/28/2009
Notice Type: Combined Synopsis/Solicitation
NAICS: 423450 — Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers
Contracting Office: Department of the Air Force, Direct Reporting Units, USAF Academy - 10 MSG/LGC, 8110 Industrial Drive, Suite 200, USAF Academy, Colorado, 80840-2315
ZIP Code: 80840-2315
Solicitation Number: FA7000-09-T-0048
Archive Date: 6/24/2009
Point of Contact: Nicole M. Allen, Phone: 7193338265, Leslie A. Ryan, Phone: 719-333-3961
E-Mail Address: nicole.allen@usafa.af.mil, leslie.ryan@usafa.af.mil
(nicole.allen@usafa.af.mil, leslie.ryan@usafa.af.mil)
Small Business Set-Aside: Total Small Business
Description: Buy American Act Certification This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written (formal) solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ), solicitation number FA7000-09-T-0048, in accordance with FAR Parts 12 & 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-32, effective 31 March 2009. The North American Industrial Classification System (NAICS) number is 423450 and the small business size standard is 100 employees. This is a 100% Small Business set-aside. All responsible sources may submit a quote, which if received timely, will be considered by the 10 th Contracting Division, USAF Academy (USAFA). The 10th Mission Support Group, Directorate of Contracting, United States Air Force Academy (USAFA) Colorado has received a Brand Name or Equal requirement for the purchase of three (3) sets of Steris Harmony Dual LED 585 Lights, salient characteristics provided below. The 10 th Medical group has determined these characteristics to be the only suitable features to provide the functionality they require. Salient Characteristics required are: •A) Lux Rating 120,000 or better •B) CRI rating of 93 or better •C) Dimensions not to exceed 30" x 31" across the corners (26 inches across the flats) •D) Ability to provide service within 24 hours of a repair notification •E) Minimum one-year warranty •F) Must be compatible with existing custom-made ceiling mounts •G) Ability to provide training to the surgical staff on use and maintenance of the lighting Quotes may be provided for the Steris Harmony Dual LED 585 Lights as a brand name product or for a proposed "equal" piece of equipment fulfilling the above specifications. REQUIREMENTS FOR QUOTE Prices quoted must be Firm-Fixed price to include shipping and handling charges based on F.O.B Destination. IUID will apply to this purchase, please see DFARS clause 252.211-7003 Item Identification and Valuation (Aug 2008). LINE ITEM 0001 SURGICAL LIGHTS TO INCLUDE: Description Qty Unit Price Extended Price Surgical Lights to include 3 $_______ $___________ minimum one year warranty Deinstallation-Existing lights 3 $_______ $___________ Installation-New surgical lights 3 $_______ $___________ IUID Marking 3 $_______ $___________ Operators Manuals 2 $_______ $___________ If an offeror believes they have an equal product which meets all the features and functionality of the items listed above, they may submit a quote for that product. It will be evaluated for technical acceptability. If it is determined by the Government to be an equal product it will be evaluated along with all other technically acceptable offers. If it is determined by the Government not to be an equal product, the offer will not be considered for award. The following Federal Acquisition (FAR) clauses apply to this combined synopsis/solicitation and offerors must comply with all instructions contained in FAR 52.212-1, Instructions to Offerors--Commercial Items, addenda applies: The contractor shall submit their quote on company letterhead to include the following: solicitation number, contact name, address, telephone number of the offeror, unit price, extended price, any discount terms, delivery terms, cage code, DUNS number, tax identification number, size of business, warranty information and a statement that the provision at FAR 52.212-3 has been completed electronically on line at ( http://orca.bpn.gov/publicsearch.aspx ). DFARS 252.225-7000, Buy American Act-Balance of Payments Program Certificate (attachment 1) or can be obtained at http://farsite.hill.af.mil/ ), must be completed, signed and returned with quote. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. In accordance with FAR 52.212-4(t), Central Contractor Registration (CCR) contractors must be registered with CCR to conduct business with the Department of Defense. No purchase order can be awarded to any company without this registration. ( www.ccr.gov ) The provisions at FAR 52.212-2, Evaluation--Commercial Items applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsive responsible offeror whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. The following factors shall be used to evaluate offers: Offeror mus explain how they intend to comply with the IUID requirement, i.e. what marking method will be used. Award will be made on the basis of determining the technically acceptable offer with the lowest evaluated price which meets or exceeds the requirements. Once an offer has been determined to be technically acceptable then the Offeror with the lowest evaluated price will be awarded the contract. If an offer is not technically acceptable it will not be considered; this includes failure to comply with the IUID requirement. The provision at 52.212-3 shall be completed electronically on line at http://orca.bpn.gov/publicsearch.aspx and DFARS 252.225-7000 with its quote. The following clauses apply to this acquisition. If no completed on-line, 52.212-3 shall be completed in hard copy and submitted with quote. The clause at FAR 52.212-4, Contract Terms and Conditions--Commercial Items, with the following addenda, applies: FAR 52.252-2 Clauses Incorporated by Reference: This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. The full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil/. The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Deviation) applies to this acquisition. Additional FAR clauses cited in the clause applicable to this acquisition are: 52.219-6 Notice of Total Small Business Set-aside (Jun 2006) 52.219-28 Post-Award Small Business Program Representation (Jun 2007) 52.222-3 Convict Labor (Jun 2003) 52.222-19 Child Labor -- Cooperation with Authorities and Remedies (Aug 2007) 52.222-21 Prohibition of Segregated Facilities (Feb 1999) 52.222-26 Equal Opportunity (Mar 2007) 52.222-36 Affirmative Action for Workers with Disabilities (Jun 1998) 52.222-50 Combating Trafficking in Persons (Aug 2007) 52.225-13 Restrictions on Certain Foreign Purchases (Feb 2006) 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration (OCT 2003) 52.233-3 Protest After Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) DFARS 252.212-7001, Contract terms and Conditions required to implement status of Executive Orders applicable to Defense Acquisitions of Commercial Items (Apr 2007) applies to this acquisition. Additional DFARS clauses cited in the clause applicable to this acquisition are: 252.225-7001, Buy American Act and Balance of Payments Program (June 2005) and 252.232-7003, Electronic Submission of Payment Requests (Aug 2007). DFARS 252.211-7003, Item Identification and Valuation (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. "DoD unique item identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a non-repeatable identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, or Defense Logistics Information System (DLIS) Commercial and Government Entity (CAGE) Code). "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) All delivered items for which the Government's unit acquisition cost is $5,000 or more. (ii) The following items for which the Government's unit acquisition cost is less than $5,000: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number ____. (2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item. (3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media. (4) Unique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent; and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in the version of MIL-STD-130, Identification Marking of U.S. Military Property, cited in the contract Schedule. (ii) The issuing agency code- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires unique item identification under paragraph (c)(1)(i) or (ii) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of, or associated with, the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_submission_information.html. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which unique item identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s). (End of clause) USAFA 5352.242-9000, Contractor Access to Air Force Installations (USAFA Supplemented JULY 2008) applies to this acquisition. Quotes must be received no later than 1200 pm Mountain Standard Time, 09 June 2009 at 1 0 LGCB, Attn: Nicole Allen, 8110 Industrial Drive, Suite 200, USAF Academy, CO 80840-2315. You may also email or fax quotes to Nicole Allen, Contract Specialist at 719-333-9103. Please submit questions via e-mail to nicole.allen@usafa.af.mil. The POC for this acquisition is Nicole Allen, 719-333-3587. Offers received after this date and time will be considered late in accordance with 52.212-1(f) and will not be evaluated. 5352.201-9101 OMBUDSMAN (AUG 2005) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the USAF Academy Ombudsmen, Kelly Snyder 8110 Industrial Drive, Ste 103 USAFA, CO 80840 Telephone number 719-333-2074 FAX 719-333-2379 email: kelly.snyder@usafa.af.mil Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) HIPAA April 14, 2003 Privacy of Protected Health Information (a) Definitions. As used in this clause: Individual has the same meaning as the term "individual" in 45 CFR 164.501 and shall include a person who qualifies as a personal representative in accordance with 45 CFR 164.502(g). Privacy Rule means the Standards for Privacy of Individually Identifiable Health Information at 45 CFR part 160 and part 164, subparts A and E. Protected Health Information has the same meaning as the term "protected health information" in 45 CFR 164.501, limited to the information created or received by The Contractor from or on behalf of The Government. Required by Law has the same meaning as the term "required by law" in 45 CFR 164.501. Secretary means the Secretary of the Department of Health and Human Services or his/her designee. Terms used, but not otherwise defined, in this Agreement shall have the same meaning as those terms in 45 CFR 160.103 and 164.501. (b) The Contractor agrees to not use or further disclose Protected Health Information other than as permitted or required by the Contract or as Required by Law. (c) The Contractor agrees to use appropriate safeguards to prevent use or disclosure of the Protected Health Information other than as provided for by this Contract. (d) The Contractor agrees to mitigate, to the extent practicable, any harmful effect that is known to the Contractor of a use or disclosure of Protected Health Information by the Contractor in violation of the requirements of this Contract. (e) The Contractor agrees to report to the Government any use or disclosure of the Protected Health Information not provided for by this Contract. (f) The Contractor agrees to ensure that any agent, including a subcontractor, to whom it provides Protected Health Information received from, or created or received by the Contractor on behalf of the Government agrees to the same restrictions and conditions that apply through this Contract to the Contractor with respect to such information. (g) The Contractor agrees to provide access, at the request of the Government, and in the time and manner designated by the Government to Protected Health Information in a Designated Record Set, to the Government or, as directed by the Government, to an Individual in order to meet the requirements under 45 CFR 164.524. (h) The Contractor agrees to make any amendment(s) to Protected Health Information in a Designated Record Set that the Government directs or agrees to pursuant to 45 CFR 164.526 at the request of the Government or an Individual, and in the time and manner designated by the Government. (i) The Contractor agrees to make internal practices, books, and records relating to the use and disclosure of Protected Health Information received from, or created or received by the Contractor on behalf of, the Government, available to the Government, or at the request of the Government to the Secretary, in a time and manner designated by the Government or the Secretary, for purposes of the Secretary determining the Government's compliance with the Privacy Rule. (j) The Contractor agrees to document such disclosures of Protected Health Information and information related to such disclosures as would be required for the Government to respond to a request by an Individual for an accounting of disclosures of Protected Health Information in accordance with 45 CFR 164.528. (k) The Contractor agrees to provide to the Government or an Individual, in time and manner designated by the Government, information collected in accordance with this Clause of the Contract, to permit the Government to respond to a request by an Individual for an accounting of disclosures of Protected Health Information in accordance with 45 CFR 164.528. General Use and Disclosure Provisions Except as otherwise limited in this Agreement, the Contractor may use or disclose Protected Health Information on behalf of, or to provide services to, the Government for the following purposes, if such use or disclosure of Protected Health Information would not violate the Privacy Rule or the Department of Defense Health Information Privacy Regulation if done by the Government: [NONE]. Specific Use and Disclosure Provisions (a) Except as otherwise limited in this Agreement, the Contractor may use Protected Health Information for the proper management and administration of the Contractor or to carry out the legal responsibilities of the Contractor. (b) Except as otherwise limited in this Agreement, the Contractor may disclose Protected Health Information for the proper management and administration of the Contractor, provided that disclosures are required by law, or the Contractor obtains reasonable assurances from the person to whom the information is disclosed that it will remain confidential and used or further disclosed only as required by law or for the purpose for which it was disclosed to the person, and the person notifies the Contractor of any instances of which it is aware in which the confidentiality of the information has been breached. (c) Except as otherwise limited in this Agreement, the Contractor may use Protected Health Information to provide Data Aggregation services to the Government as permitted by 45 CFR 164.504(e)(2)(i)(B). (d) Contractor may use Protected Health Information to report violations of law to appropriate Federal and State authorities, consistent with 45 CFR 164.502(j)(1). Obligations of the Government Provisions for the Government to Inform the Contractor of Privacy Practices and Restrictions (a) Upon request the Government shall provide the Contractor with the notice of privacy practices that the Government produces in accordance with 45 CFR 164.520, as well as any changes to such notice. (b) The Government shall provide the Contractor with any changes in, or revocation of, permission by Individual to use or disclose Protected Health Information, if such changes affect the Contractor's permitted or required uses and disclosures. (c) The Government shall notify the Contractor of any restriction to the use or disclosure of Protected Health Information that the Government has agreed to in accordance with 45 CFR 164.522. Permissible Requests by the Government The Government shall not request the Contractor to use or disclose Protected Health Information in any manner that would not be permissible under the Privacy Rule if done by the Government, except for providing Data Aggregation services to the Government and for management and administrative activities of the Contractor as otherwise permitted by this clause. Termination (a) Termination. A breach by the Contractor of this clause, may subject the Contractor to termination under any applicable default or termination provision of this Contract. (b) Effect of Termination. (1) If this contract has records management requirements, the records subject to the Clause should be handled in accordance with the records management requirements. If this contract does not have records management requirements, the records should be handled in accordance with paragraphs (2) and (3) below (2) If this contract does not have records management requirements, except as provided in paragraph (3) of this section, upon termination of this Contract, for any reason, the Contractor shall return or destroy all Protected Health Information received from the Government, or created or received by the Contractor on behalf of the Government. This provision shall apply to Protected Health Information that is in the possession of subcontractors or agents of the Contractor. The Contractor shall retain no copies of the Protected Health Information. (3) If this contract does not have records management provisions and the Contractor determines that returning or destroying the Protected Health Information is infeasible, the Contractor shall provide to the Government notification of the conditions that make return or destruction infeasible. Upon mutual agreement of the Government and the Contractor that return or destruction of Protected Health Information is infeasible, the Contractor shall extend the protections of this Contract to such Protected Health Information and limit further uses and disclosures of such Protected Health Information to those purposes that make the return or destruction infeasible, for so long as the Contractor maintains such Protected Health Information. Miscellaneous (a) Regulatory References. A reference in this Clause to a section in the Privacy Rule means the section as in effect or as amended, and for which compliance is required. (b) Survival. The respective rights and obligations of Business Associate under the "Effect of Termination" provision of this Clause shall survive the termination of this Contract. (c) Interpretation. Any ambiguity in this Clause shall be resolved in favor of a meaning that permits the Government to comply with the Privacy Rule. (End of Clause) ADDENDUM TO FAR 52.212-4(c) CHANGES Text in paragraph (c) is deleted and replaced with the following: Changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of certain changes such as administrative changes including changes in paying office, appropriation data, etc. authorized by the Federal Acquisition Regulation and its supplements that may be made unilaterally by the Contracting Officer (for a complete list of changes that may be made unilaterally, see FAR 43.103(b)) (End of Addendum)
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/DRU/10ABWLGC/FA7000-09-T-0048/listing.html)
Place of Performance: Address: 4102 Pinion Drive Suite 100, USAFA, Colorado, 80840, United States; Zip Code: 80840
Record: SN01829138-W 20090530/090528234921-d5ff09ad2fcec8bc0057622884fa3ff4 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

65 -- Surgical Spotlights - Attachment 1