SOLICITATION NOTICE
81 -- DRUM, SHIPPING AND STORAGE
- Notice Date
- 5/27/2009
- Notice Type
- Presolicitation
- NAICS
- 321920
— Wood Container and Pallet Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, Defense Supply Center Columbus BSM, P O Box 3990, Columbus, Ohio, 43216-5000
- ZIP Code
- 43216-5000
- Solicitation Number
- SPM7M209R0107
- Archive Date
- 7/28/2009
- Point of Contact
- Tracy L. Holmes, Phone: 6146927780
- E-Mail Address
-
tracy.holmes@dla.mil
(tracy.holmes@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- This notice is to announce that this NSN will be solicited in the near future. This is not a Soliciation/Request for Proposal. The Soliciation/Request for Proposal will be forth coming and will be available via the DSCC Website address (URL) is http://dibbs.dscc.dla.mil/rfp/. The response date referenced above is estimated. Solicitation Issue date is on or about 06/11/09, with the Response date on or around 07/13/09. Note: Copies of this solicitation will only be available via the World Wide Web. Hard copies of this solicitation are not available. Reference number: IQC009091009024. NSN: 8110-00-030-7780. Nomenclature: Drum, Shipping and Storage. Approved source is Berenfield Container (9Z473)). Approved part number is DFS00001. This will be a 100% small business set-aside. An Indefinite Quantity Contract (365 days basic contract with four 365 day option periods) is anticipated. Estimated annual demand quantity is 5215 each. Item Description: DRUM, STEEL, SHIPPING AND STORAGE I.A.W. 49 CFR 178 SUBPART L AND SUBPART M CFR SECTION 178 AS APPLIES. UN 1A2/Y1.5/150 IDENTIFY TO: MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY RATED (MARKED) CAP. 208 LITERS (55 GAL.) & MINIMUM OVERALL CONTENT 216.5 LITERS (57.2 GAL.) MINIMUM HEIGHT WITHOUT COVER 864MM, + OR - 3.18MM (34 IN., + OR - 0.125 IN.). MINIMUM INSIDE DIA. IS 572MM, + OR - 1.59MM (22.5 IN., + OR - 0.0625 IN.). MINIMUM MATERIAL THICKNESS OF DRUM IS 1.09MM (0.0428 IN.). DRUM SHALL BE TESTED I.A.W. UN/POP 1A2/Y1.5/150. MARKINGS: DRUM SHALL BE MARKED I.A.W. UN RQMTS. FULL REMOVEABLE HEAD WITH NUT AND BOLT TYPE LOCKING RING. MINIMUM MATERIAL THICKNESS FOR LOCKING RING 2.40MM (0.0946 IN.). MINIMUM MATERIAL THICKNESS OF BOLT IS 15.875MM (0.625 IN.). MINIMUM LENGTH IS 88.9MM (3.500 IN.). PROTECTIVE COATING: COAT ALL EXTERIOR SURFACES OF THE DRUM (INCLUDING COMPONENT PARTS), EXCEPT THE CLOSING BOLT AND GASKET (WHEN SUPPLIED), WITH A RUST INHIBITING COATING THAT WITHSTANDS THE SALT SPRAY TEST REQUIREMENTS OF ASTM-B-117 UTILIZING A FIVE PERCENT SALT SOLUTION AT 35 DEGREES C (120 DEGREES F) FOR A MINIMUM EXPOSURE TIME OF 96 HOURS. RESULTS OF THE SALT SPRAY TEST SHALL SHOW NO RUST CREEPAGE, BLISTERING, UNDERCUTTING OR LOSS OF ADHESION OF THE PAINT BEYOND 1/8 INCH OF THE SCRIBE MARK. ALL OTHER SURFACES OF THE TEST SPECIMENS SHALL SHOW NO MORE THAN A TRACE OF FILM FAILURE, (RUST GRADE 9 OF ASTM-D-610), WITH NONE LARGER THAN 1MM, (3/64 INCH) IN DIAMETER. ACCEPTABLE COLORS, IAW FED STD 595, ARE AS FOLLOWS: NOS. 37038, 37030, 34082, 34083, 34086, 34089, 34092, 34102, 34127. BOLT & NUT SHALL BE INSTALLED TO THE LOCKING RING SO THEY WILL NOT BE LOST DURING SHIPMENT. DRUM SHALL BE FURNISHED FULLY ASSEMBLED. Various incremental quantities will be solicited. Deliveries will be to various DLA customers and/or stocking locations. While price is a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. All responsible sources may submit an offer/quote, which shall be considered.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/SPM7M209R0107/listing.html)
- Record
- SN01827776-W 20090529/090527234839-4977bb8bfc4012749b43c37f4ff63fdb (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |