SOLICITATION NOTICE
J -- Calibration Test Blocks
- Notice Date
- 4/29/2009
- Notice Type
- Modification/Amendment
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, Specialty Center Acquisitions NAVFAC, 1205 Mill Road, Building 850, Port Hueneme, California, 92043-4347
- ZIP Code
- 92043-4347
- Solicitation Number
- N62583-09-T-0082
- Archive Date
- 5/16/2009
- Point of Contact
- Olivia Soto, Phone: 805-982-5119
- E-Mail Address
-
olivia.soto@navy.mil
- Small Business Set-Aside
- N/A
- Description
- FOR CLARIFICATION: The term "SET" as it is used in the Scope of Work pertains to a set of calibration blocks and set of rings. The set of blocks means one circumferential and one axial block each with two notches as shown on the ASME Compressed Gas/Air Flask drawings. The set of rings means two rings with one ring with internal notches and one ring with external notches. The notch depth d1 and d2 for the rings are listed as typical depths in the drawing "Example of Standardizing Ring with Reference Notches". The typical depth for the notch in rings could be that used as the depth(percent thickness) listed on the Calibration Block drawings. The information is available in the existing solicitation scope and drawings.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=0bc159aa46e8d1590c01bd2b0420108a&tab=core&_cview=1)
- Record
- SN01805045-W 20090501/090429222603-0bc159aa46e8d1590c01bd2b0420108a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |