SOLICITATION NOTICE
66 -- Vector Network Analyzer
- Notice Date
- 3/24/2009
- Notice Type
- Modification/Amendment
- NAICS
- 334515
— Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, 562 CBSG OMP (AFMETCAL), 813 Irving Wick Dr. W. Bldg 2, Heath, Ohio, 43056-6116, United States
- ZIP Code
- 43056-6116
- Solicitation Number
- 10E-148A-RF
- Archive Date
- 3/16/2010
- Point of Contact
- Kathryn A Vaccaro, Phone: 740-788-5078
- E-Mail Address
-
kathryn.vaccaro@afmetcal.af.mil
- Small Business Set-Aside
- N/A
- Description
- The following is additional information to be considered in your response. "This is a metrology grade vector network analyzer (VNA) system for deployment in the Air Force Air Logistics Center Precision Measurement Equipment Laboratories (PMELs). This VNA system must be capable of magnitude and phase swept s-parameter measurements with full twelve-term error correction. Based upon state-of-the-art accuracy and uncertainty requirements needed for this VNA system, the expected minimum warranted VNA system error corrected performance with a 2.4 mm SOLT precision calibration kit is summarized below. VNA System Frequency Range 10 MHz to 50 GHz VNA System Dynamic Range 85 dB full band VNA System Directivity 10MHz to 20GHz > 41 dB 20GHz to 40GHz > 37 dB 4GHz to 50GHz > 35 dB VNA System Source Match 10MHz to 20GHz > 37 dB 20GHz to 40GHz > 32 dB 40GHz to 50GHz > 28 dB VNA System Load Match 10MHz to 20GHz > 41 dB 20GHz to 40GHz > 37 dB 40GHz to 50GHz > 35 dB VNA System Reflection Tracking Magnitude 10MHz to 50GHz < 0.1 dB VNA System Transmission Tracking Magnitude 10MHz to 50GHz < 0.2 dB Accessories: All system calibration, verification, operation software/firmware, metrology grade cables, and test-port adapters to fully support Type-N, 7 mm, 3.5 mm, 2.92 mm, and 2.4 mm measurements must be included in any proposal. It is anticipated that precision SOLT calibration kits and verification kits previously procured with a Wiltron 360B VNA based system in connectors Type-N, 7 mm, 3.5 mm, 2.92 mm, and 2.4mm will be government furnished equipment leveraged to have their respective devices recharacterized into the data structure required by this VNA system. Alternatively, new precision SOLT calibration kits and verification kits may or may not be procured with this VNA system at the option of the AFMETCAL program. A standard equipment rack with a permanent work surface and mounted casters for portability of the VNA system must also be included in any proposal."
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=195d4a93eea5013b9db83081f32db45b&tab=core&_cview=1)
- Record
- SN01776788-W 20090326/090324220959-195d4a93eea5013b9db83081f32db45b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |