SOURCES SOUGHT
J -- DRYDOCK REPAIRS TO THE USCGC THETIS (WMEC-910)
- Notice Date
- 1/21/2009
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- 2009DDUSCGTHETIS
- Response Due
- 1/30/2009
- Archive Date
- 2/14/2009
- Point of Contact
- FREDRICK BARAT BAECHLE,, Phone: 757-628-4652, Michael E Monahan,, Phone: 757-628-4639
- E-Mail Address
-
FREDRICK.B.BAECHLE@USCG.MIL, michael.e.monahan@uscg.mil
- Small Business Set-Aside
- N/A
- Description
- The U.S. Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, Service-Disabled Veteran-owned Small Business concerns (SDVOSB), or for Small Businesses. Response by interested parties must be made by interested parties by 26 January 2009 The estimated value of this procurement is between $1,000,000.00 and $1,200,000.00. The small business size standard is less than 1,000 employees. The acquisition is Dry-dock repair the USCGC THETIS (WMEC-910), A 270 foot “B” class medium endurance cutter. The homeport of the vessel is Key West, FL. The performance period is twenty-eight (28) calendar days and is expected to begin on or about 29 June 2009 and end on or about 27 August 2009. The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the USCGC THETIS (WMEC-910) This work will include, but is not limited toList of Sketches()1Clean and Inspect Grey Water Collection and Holding Tanks Clean and Inspect Sewage Collection and Holding Tanks 3Remove and Reinstall Propeller Shafts And Inspect Stern Tubes Inspect Propeller Shafts (AFC-45)5Remove, Inspect, and Reinstall Intermediate Shafts <CMP,Renew Shaft Covering Renew Water-Lubricated Shaft Bearings Renew Propeller Shaft Sleeve(s) Remove and Reinstall Controllable Pitch Propeller Hubs10Service Both Onboard Controllable Pitch Propeller Systems 11 Renew Depth Indicating Transducers12Renew Speed Doppler 13Overhaul and Renew Valves 14Overhaul ASW Valves 15Overhaul and Renew Firemain Valves 16Clean, Inspect and Test Hot Water Accumulator Tank and Hydro-Pneumatic Tank 17Service Rudder Assemblies 18Service Fin Stabilizer Systems19Perform Anchor, Anchor Chain, and Ground Tackle Maintenance 20Preserve Anchor, Anchor Chain, and Ground Tackle 21Inspect Chain Lockers 22Repair and Preserve Ballast Tanks - Partial 23Preserve Sewage Collection and Holding Tanks 24Preserve Grey Water Collection and Holding Tanks –25Preserve Underwater Body – “100%” 26Preserve Underwater Body - "Partial"27Preserve Freeboard Surfaces - Partial (In Drydock) 28Renew Cathodic Protection System 29Routine Drydocking 30Provide Temporary Logistics 31Repair and Preserve JP-5 Bilge Surfaces 32Preserve Auxiliary II Bilge Surfaces 33Repair Auxiliary Machinery Space #1 Deck Repair 02 Deck 35Repair Auxiliary Machinery Space #2 Bilge Plating 36Overhaul Stern Tube Seal Assemblies37Inspect Simplex and Renew Duplex Sea Strainers 38Renew Lube Oil and Oily Waste Tank Stuffing/Sounding Tubes 39Repair Plenum Chamber 40Upgrade Fire Pumps (AC&I)41Install SSDG Jacket Water Cooler Duplex Strainer and Flow Control System :. All welding and brazing shall be accomplished by trained welders, who have been certified by the applicable regulatory code performance qualification procedures. At the present time, the acquisition is expected to be issued as a small business set aside. However, in accordance with FAR 19.1305 if your firm is HUBZone certified or a Service-Disabled Veteran-owned Small Business and intends to submit an offer on this acquisition, please respond by e-mail to; Fredrick.B.Baechle@uscg.mil or by fax at (757) 628- 4676 you must include: (a) a positive statement of your intention to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and telephone numbers. At least two references are requested, but more are desirable. Your response is required by Jan 10, 2008 at 4:30 pm, EST. Contractors are reminded that should this acquisition become a Hubzone set aside, FAR 52.219-3, Notice of Total Hubzone Set-aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern. Contractors are reminded that should this acquisition become a Service-Disabled Veteran-owned Small Business Set-Aside, FAR 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service Disabled Veteran-owned Small Business set aside or Small Business set-aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a HUBZone, SDVOSB set-aside, or small business set-aside, will be posted in the FedBizOpps website at http://www.fedbizopps.gov. Please submit your questions via email to Fredrick (Barat) Baechle, Contracting Specialist, at Fredrick.B.Baechle@uscg.mil or call (757) 628-4652.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=bc43725c743dac71a604db8b626e3c3e&tab=core&_cview=1)
- Place of Performance
- Address: TAMPA, Florida, United States
- Record
- SN01735623-W 20090123/090121215628-bc43725c743dac71a604db8b626e3c3e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |