SOLICITATION NOTICE
J -- F108 MODULE 13/15
- Notice Date
- 11/25/2008
- Notice Type
- Presolicitation
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), DEPARTMENT OF THE AIR FORCE; BLDG 3001 SUITE 2AH82A; TINKER AFB;OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- FA8121-09-R-0001
- Response Due
- 1/9/2009
- Archive Date
- 4/9/2009
- Point of Contact
- Billie Kindschuh, Phone 405-622-7658, Fax 405-739-3464, />
- E-Mail Address
-
illie.kindschuh@tinker.af.mil<br
- Small Business Set-Aside
- N/A
- Description
- REMANUFACTURE F108-100/200 TURBINE ASSEMBLY (MODULE 13/15) LOWPRESSURE UNION ASSEMBLY SOL FA8121-09-R-0001 PR FD2030-08-03889AFGLSC/448 SCMG/PKBB TINKER AFB OK 73145-3015, For additionalinformation contact Billie Kindschuh/PKA/(405) 622-7658. A firmfixed-price Requirements type commercial contract is contemplated withone basic year and 2 (two) one year options for remanufacture ofF108/CFM 56-2A/2B Module 13/15. Item 0001: NOUN: Remanufacture F108Module 13/15 (USAF) Input/Output NSN 2840-01-229-5786PN, P/N:305-482-301-0 and/or 305-482-302-0, and/or 305-482-303-0. BEQ asfollows: 55 EA Basic Year; 36 EA OPT I; 36 EA OPT II. Item 0002:NOUN: Remanufacture F108 Module 13/15 (USN) Input/Output NSN2840-01-484-3913PN, P/N: 305-482-302-0-2A. BEQ as follows: 3 EA BasicYear; 3 EA OPT I; 3 EA OPT II. Applicable to: F108 Engine, KC-135RAircraft. Destn: Tinker Air Force Base OK 73145-3032. Item 0003: CEMSReporting IAW CDRL and DID. Item 0004: AFMC Form 413 Depot ProductionMaintenance Report IAW CDRL and DID. Item 0005: CAVAF Reporting IAWCDRL and DID. Description: The LP Turbine Rotor and Stator Module is a4-stage axial-type mechanical assembly composed of both rotating andnon-rotating components. These components consist of abradablematerials and high strength nickel alloys. The Turbine Frame Module isa structural assembly consisting of a hub and a multisided outer casingconnected through slanted struts. It is a weldment composed of a nickelalloy material. Function: The LP Turbine rotor and Stator moduleconverts hot gas pressure and velocity downstream of the HPT intomechanical power to drive the fan rotor and booster assembly. Theturbine frame assembly supports the low pressure turbine rotor rearsection and provides for engine rear mounting on the airframe.Delivery: Item 0001: 2 EA per month 30 days ARO and receipt ofreparable assets. Item 0002: 2 EA per month 30 days ARO and receipt ofreparable assets. Qualification requirements: Sources must be qualifiedprior to being considered for award. Qualification requirements are notavailable for this acquisition. These qualification requirements applyto line item(s) 0001 and 0002. The approximate solicitation issue dateis 22 DEC 2008and the estimated solicitation response date will be 22JAN 2009. RMC: R2Z. History: last buy Nov 03, Chromalloy ComponentServices Inc., QTY: 20 EA Unit price: <$310,000.00 Electronicprocedures will be used for this solicitation through FedBizOpps athttp://www.eps.gov/. Approved Sources are General Electric EngineServices, Cincinnati, OH 45215-1988; Chromalloy Component ServicesInc., San Antonio, TX 78226-1838; Propulsion Technology Corp., Miami,FL, and Snecma Services, FR. All responsible sources solicited maysubmit a bid, proposal, or quotation that shall be considered. Awardwill be made only if the offeror, the product/service or themanufacturer meets qualification requirements at the time of award inaccordance with FAR clause 52.209-1. Interested persons may identifytheir interest and capability to respond to the requirement or submitproposals. This notice of intent is not a request for competitiveproposals. However, all proposals received within forty five-days(thirty days if award is issued under an existing basic orderingagreement) after date of publication of this synopsis will be consideredby the Government. A Determination by the Government not to compete thisproposed contract based upon responses to this notice is solely withinthe discretion of the Government. Information received will normally beconsidered solely for the purpose of determining whether to conduct acompetitive procurement. Specifications, plans, or drawings relating tothe procurement described are incomplete or not available and cannot befurnished by the Government. Please contact: OC-ALC/BC, ATTN: SourceDevelopment Office, 3001 Staff Dr Ste 1AG85A, Tinker AFB OK 73145-3009in writing for further information concerning the source approvalprocess. It is suggested that small business firms or others interestedin subcontracting opportunities in connection with the describedprocurement make contact with the firm(s) listed. Note: An Ombudsman hasbeen appointed to hear concerns from offerors or potential Offerorsduring the proposal development phase of this acquisition. The purposeof the Ombudsman is not to diminish the authority of the programdirector or contracting officer, but to communicate contractor concerns,issues, disagreements, and recommendations to the appropriate governmentpersonnel. When requested, the Ombudsman will maintain strictconfidentiality as to source of the concern. The Ombudsman does notparticipate in the evaluation of proposals or in the source selectionprocess. Interested parties are invited to call the Ombudsman at (405)736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note:Faxed solicitation requests can be submitted to AFGLSC/448 SCMG/PKBB,Tinker AFB OK 73145-3015, FAX Number (405) 739-3462. Request forWritten Proposal will be posted to FedBizOpps. See Note (s) 23.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=506edaf3031c5104cccaac5a00fc82b9&tab=core&_cview=1)
- Record
- SN01710609-W 20081127/081125220506-506edaf3031c5104cccaac5a00fc82b9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |