SOLICITATION NOTICE
95 -- STAIR TREADS
- Notice Date
- 9/19/2008
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Department of the Army, Army Contracting Agency, South Region, ACA, Fort Stewart, 976 William H Wilson Ave, Fort Stewart, GA 31314
- ZIP Code
- 31314
- Solicitation Number
- W33DL482598701
- Response Due
- 9/25/2008
- Archive Date
- 3/24/2009
- Point of Contact
- Name: Marvene Falgout, Title: Contract specialist, Phone: 9127678654, Fax: 9127678437
- E-Mail Address
-
marvene.falgout@us.army.mil;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W33DL482598701 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-26. The associated North American Industrial Classification System (NAICS) code for this procurement is 332323 with a small business size standard of 500 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2008-09-25 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Stewart, GA 31314 The USA ACA Ft. Stewart requires the following items, Brand Name or Equal, to the following: LI 001, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 212, 267, EA; LI 002, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 213, 267, EA; LI 003, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 215, 199, EA; LI 004, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 216, 199, EA; LI 005, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 218, 199, EA; LI 006, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 501, 267, EA; LI 007, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 503, 199, EA; LI 008, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 504, 199, EA; LI 009, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 514, 267, EA; LI 010, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 515, 199, EA; LI 011, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 516, 199, EA; LI 012, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 517, 263, EA; LI 013, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 518, 199, EA; LI 014, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 629, 267, EA; LI 015, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 630, 199, EA; LI 016, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 631, 199, EA; LI 017, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 632, 263, EA; LI 018, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 633, 267, EA; LI 019, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 634, 199, EA; LI 020, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 635, 263, EA; LI 021, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 636, 199, EA; LI 022, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 637, 199, EA; LI 023, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 712, 267, EA; LI 024, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 713, 199, EA; LI 025, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 714, 263, EA; LI 026, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 715, 199, EA; LI 027, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's -- Please refer to FedBid for complete list of contract requirement(s) and terms and conditions.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=867718d22e0dd7bcf89afcb5c19a612e&tab=core&_cview=1)
- Place of Performance
- Address: Fort Stewart, GA 31314<br />
- Zip Code: 31314-4829<br />
- Zip Code: 31314-4829<br />
- Record
- SN01675882-W 20080921/080919220248-867718d22e0dd7bcf89afcb5c19a612e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |