SOLICITATION NOTICE
23 -- Semi Truck
- Notice Date
- 8/25/2008
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Department of Energy, Federal Locations, All DOE Federal Contracting Offices, One West Third, Tulsa, OK
- ZIP Code
- 00000
- Solicitation Number
- DE-RP75-08SW59548
- Response Due
- 8/28/2008
- Archive Date
- 2/28/2009
- Point of Contact
- Daniel Foyil, Contracting Officer, 918-595-6740,daniel.foyil@swpa.gov;Daniel Foyil, Contract Specialist, 918-595-6740, <br />
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial itemsprepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is being issued as a Request for Proposals (RFP). Submit only written Proposals for RFP DE-RP75-08SW59548. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-26. This acquisition is a Small Business Set-Aside. The associated NAICS code is 423110 with a small business size standard of 100 employees. This RFP contains two (2) line items. The line item descriptions are as follows: CLIN 0001 One (1), Tanker Truck, 2008 or newer International Diamond Spec Model 5600i (6x4)(DF567), or equal in accordance with the specifications below: -Requested GCWR 90,000, Calc. GVWR 54,780 -Calc. Geared Speed: 74 MPH -Wheel base of 192 inches, cab to axle: 130 inches, axle to frame: 62 inches. -Diesel engine, Cummins ISX 500, 50 state 525 HP @ 1800 RPM Electronic Feature Default Speed (Actual 2000 RPM Governed Speed); 1650 lb-ft Torque @ 1200 RPM; 525 Peak HP (Max) Includes :Air cleaner with vacuator; remote mounted :Cruise control, electronic :Engine shutdown, electric, key operated :Fuel filter (2) engine and chassis mounted :Governor, electronic :Oil filter, engine spin-on type :Throttle, hand control, electronic, instrument panel mounted :Timer, idle shutdown :Water filter, engine mounted -Transmission, Manual, Fuller RTLO, 13 speed manual, with air shift and internal lube oil pump Includes :Clutch brake, torque limiting :Fill plug, magnetic -Cutch, Eaton Fuller Solo EP1552, Easy-Pedal, Two-Plate, Cast Angle Spring; Ceramic, 15.5 Diameter, Soft Clutch 7-Spring Damper, Mechanical Pull-Type Control, With Adjustment-Free Feature, 1700 lb-ft Torque Capacity Includes :Clutch release bearing, greasable - Axle, Front non-driving, Meritor FL-941, I-Beam Type, 18,000 lb capacity - Axle, Rear, Tandem, Dana Spicer D46-170HP/R46-170DH, Single Reduction 46,000-lb Capacity; with lube oil pump, and R wheel ends, with driver controlled locking differential in rear rear axle gear ratio; 4.10 Includes :Power Divider lock, air operated, cab control with indicator light in cluster :Rear axle drain plug, (2) magnetic -Cab, conventional Includes : A pillar cover, plastic, medium tan :Cab interior dash insulator, vinyl :Cab interior trim panels, soft padded vinyl :Clearance/Marker lights, (5) roof mounted :Coat hook and hat hook, located in cab :Console, center plastic; driver convenience with a cup and change holder, ash tray and lower storage area with net :Console, overhead molded plastic with three storage pockets; one with velcro strap for CB radio mounting; two with netting; light switches for cab dome and courtesy lights :Door check strap (2) one each door :Door trim panels, vinyl covered driver and passenger doors :Floor mats, rubber :Glass, all windows tinted :Grab handle (2) exterior, mounted behind driver and passenger doors :Grab handle, cab interior (1) passenger side :Headliner, soft padded vinyl :Heater box, metal, painted black :Instrument panel trim, vinyl, medium tan with woodgrain appearance panel face :Interior sheet metal, upper door (above window ledge) painted exterior color :Mirror, convex lookdown, located on passenger side :Skin riveted :Step (4) two on each side :Storage pocket, door (2) molded plastic, driver and passenger door :Storage, interior vinyl pocket, mounted on driver and passenger seat back :Sun visor (2) vinyl with toll ticket strap -Cab interior trim accent, burgundy -Cab interior trim, premium level, vinyl for day cab -Paint, Winter White # 9219 -Front tires, (2) 12R22.5 XZY-3 (Michelin) 483 rev/mile, load range H, 16-ply. -Rear tires, (8) 12R22.5 XZY-3 (Michelin) 483 rev/mile, load range H, 16-ply - Wheels, front disc, 22.5 inches painted steel, 2 hand hole, 10-stud (285.75MM BC) hub piloted, flanged nut, metric mount, 8.25 DC rims, with steel hubs Includes :Paint identity, front wheels, white :Wheel seals, front grease lubricated, includes, wheel bearings. - Wheels, rear dual disc, 22.5 inches painted steel, 2 hand hole, 10-stud (285.75MM BC) hub piloted, flanged nut, metric mount, 8.25 DC rims, with steel hubs Includes :Paint identity, rear wheels, white :Wheel seals, rear oil lubricated, includes, wheel bearings. -Spare tire and wheel, 12R22.5 XZY-3 (Michelin) 483 rev/mile, load range H, 16-ply on 22.5 inches painted steel, 2 hand hole, 10-stud (285.75MM BC) hub piloted, flanged nut, metric mount, 8.25 DC rims, with steel hub -Suspension, Rear, Air, Tandem: Hendrickson HAS-460-60; 60 Axle Spacing; 46,000-lb capacity, 9.5 Ride Height, with shock absorbers mounted inboard -Frame rails heat treated alloy steel, 110,000 PSI yield; 12.250x3.375x0.375 x305.4 OAL -Front tow loop -Frame rails with tapered rear -Front bumper, heavy duty, painted steel, swept back 40-degrees -Suspension, Front, Spring multileaf, shackle type; 18,000-lb capacity; less shock absorbers, includes spring pins, threaded -Brake System, Air dual system for Tractor applications; Includes :Air Compressor Air Supply Line Cummins, Caterpillar engines turbo-charged :Bob Tail Proportioning system for rear axles :Brake Chambers, spring (4) rear parking :Brake lines color coded nylon :Drain valve twist-type :Glad Hands (2) one for service and one for emergency; trailer hoses from cab :Hand Control Valve, Air mounted on steering Column :Hose Tender to secure the trailer hoses when not in use; back of cab mounted :Parking Brake Valve and combination valve for tractor and trailer; color-coded yellow and red knobs, located on instrument panel :Slack Adjusters, front automatic :Slack Adjusters, rear automatic :Switch, Auxiliary interrupter for cab and trailer clearance /marker light (Blinks lights with headlight switch in on position); instrument panel mounted :Tractor Protection Valve :Tractor Connections 15 coiled lighting cable with 7-way connector and with 15 coiled nylon brake hose -Brakes, Front, Air Cam S-cam; 16.5x6.0; includes 24 sq. in. brake chambers, includes: Dust Shields -Air brake ABS, Bendix Antilock Brake System; Full vehicle wheel control system (4-channel) -Air dryer, Bendix AD-9, with heater, standard location -Air compressor, Cummins, 18.7 CFM -Air tank location, (2) one mounted left rail under cab and one mounted under right tail BOC -Inversion valve and double check valve; added for tractor only -Steering column, tilting and telescoping -Steering wheel 2-spoke, 18 inch diameter, black -Power steering gear, (2) (Sheppard M-100/M-80), dual power -Driveshaft system SPL250XL Driveshaft and SPL 170XL Inner-axle shaft in lieu of 1810 driveshaft and 1710 inner-axle shaft -Exhaust System, single, vertical aftertreatment device frame mounted right side; includes vertical tailpipe & guard -Engine Compression Brake, Cummins, intebrake for Cummins signature or ISX engines; furnished with engine -Tail Pipe, (1) turnback type, non-bright finish, for single exhaust -Electrical System 12-Volt Includes :Batteries (4) maintenance-free, 12volt 2600 cca total :Battery Box, steel; mounted perpendicular to left rail BOC :Cigar lighter, instrument panel mounted :Courtesy light, (2) driver and passenger door mounted :Dome light, cab (2) rectangular, door and header-mounted switch activated, above door mounted, one each side :Fuses, electrical, SAE blade-type :Headlight dimmer switch, steering column mounted :Headlights, (2) Sealed beam, 5x7 rectangular :Parking light, integral with front turn signal and rear tail light :Reading light, cab (2) with individual switches; one above each door :Starter switch, electric key operated :Stop, turn, tail & back up lights, dual, rear, combination with reflector :Turn signal flasher :Turn signal switch :Turn signals, front includes integral reflectors and side marker lights; fender mounted :Windshield wiper switch, 2-speed with intermittent feature, instrument panel mounted :Windshield wipers single motor, electric, cowl mounted :Wiring, chassis color coded and continuously numbered -Horn, electric (2) -Horn, Air (2) single bell, long chrome -Batteries (4) International, maintenance-free, 12volt 2600 cca total -Alternator, Delco Remy 34-SI, 12-volt 135-amp capacity, brushless; with pad mounting -Speaker, auxiliary, with jack for CB radio -Antenna base, (1) dual function, for CB and entertainment radio, with splitter, lead-in and dual function antenna, includes CB wiring for mounting CB; in center header storage compartment -CB radio accommodation package -AM/FM radio with multiple coaxial speakers -2-Way radio wiring effects. -Indicator, low oil pressure/high coolant temperature/low coolant level, light and audible alarm, electronic controlled -Power source, terminal type 2-post -Back up alarm, electronic, 112 dba -Running light, (2) daytime -Starting motor, Delco Remy 39MT, 12-volt; gear reduced, with thermal over-crank protection -Battery Box, steel; with plastic cover, mounted perpendicular to left rail BOC -Circuit breakers, manual reset (main panel) SAE type III with trip indicators, replaces all fuses except for 5-amp fuses -Toggle switch, auxiliary with 30-amp fuse/circuit breaker and relay (accessory controlled), with 2-pin connections located at end of 6 wire coiled at back of cab -Quarter Fenders for rear wheels, mirror-finished stainless steel frame mounted -Fender extensions, rubber -Front end tilting, fiberglass with stationary grille -Bug screen, front end, mounted behind grille. -Paint schematic, PT-1 single color Winter White # 9219 -Paint type, Base coat/clear coat -Fifth wheel, air slide, Fontaine SL7ATB875024, 24 slide, cast top plate, 8.75 above top of frame; left hand roadside release -Fifth Wheel location, 4 BACK of center of Tandem -Mud flap holder, spring loaded, painted black; with 45-degree end, with red and white reflective tape -Mud flaps, rear, black poly -Anti-freeze, to -40 degrees freeze protection -Block heater, Engine, Phillips 120 volt/1500 watt with receptacle type mounted below drivers door -Fan drive, Borg-Warner K26, with on/off control, includes nylon fan -Federal Emissions for 2007; for Cummins ISX engines -Radiator, aluminum, crimped, cross flow, 2 row parallel system, 1052 square inch with 537 square inch charge air cooler, includes extended life anti-freeze to -40F, deaeration system with surge tank, radiator hoses, premium rubber -Air cleaner, Donaldson, EON element -Fan drive special effects fan cooling ring with fan shroud effects, engine mounted -Oil cooler, manual transmission air to oil type, for Fuller transmission, requires transmission lube pump -Transmission oil, EmGard 50W, synthetic -PDL warning buzzer, power divider lock -Suspension air control valve, pressure release control in cab -Axle, rear, lube, EmGard 75W-90, synthetic oil -Fuel tank, non-polished aluminum, 24 diameter, 100 U. S. gallon, 378 L capacity, left side, under cab Includes. :Fuel line fittings, crimped end on engine and synflex on chassis -Window, rear sliding -Gauge cluster, black face, English with English electric speedometer and with tachometer for air brake chassis, includes odometer, trip odometer, total engine hours, and trip hours Includes :Gauge, air pressure, dual :Gauge, engine oil pressure, electronic :Gauge, water temperature, electronic :Voltmeter -Seat, Driver, National 2000 Model 295, air suspension, intermediate back, all vinyl, two arm rest, isolated, 7 adjuster, 1 chamber lumbar, 2 position front cushion, 3 position rear cushion, 2-15 degree back angle adjustment, vinyl suspension cover Includes :Seat belt, 3 point, lap and shoulder belt type -Seat, passenger, National 2000 Model 292, non suspension, intermediate back, all vinyl, two arm rest, 11 degree back angle adjustment Includes :Seat belt, 3 point, lap and shoulder belt type -Air conditioner, with integral heater & defroster Includes :Heater hoses, premium :Refrigerant, hydrofluorocarbon HFC-134A -Windshield, two piece -Cab rear suspension, Link Z9079D1, dual frame mounted cab rear air suspension; includes special crossmember assembly -Mirrors, convex, hood mounted (2) Beach 910, stainless steel 8 diameter, mounted on both sides of hood -Mirrors, (2) International, rectangular, 16x7 West coast type, with stainless steel heads & aluminum brackets, bright finish, heated, fore & aft breakaway, accommodates trailer up to 102 wide, includes convex mirror -Sunshade, exterior aerodynamic, painted roof color, includes integral clearance/marker lights -Grab handle, towel bar type in lieu of non-bright grab handles, for use with cab/frame or cab/frame/sleeper non-bright access, without chassis skirts -Warranty, 12 month/Unlimited mileage, includes Diamond Emergency Breakdown Service, with 90 day towing. -Operators manual, Safety equipment to include reflector kit, Fire extinguisher -Vendor shall also furnish and install all the following: Cab Protector, East MFG part # 712-30040-01 or equal Full tandem fenders over the drive axles with inner and outer lips that extend at least half way down the tire front and rear, with rubber mud flaps on both front and rear. Fenders shall be mounted with a vibration isolating mounting system. Fenders, East MFG part # 099-30804-20 or equal. Fender mounting kit, East MFG X Flex Mounting Kit or equal. CLIN 0002 - Trade -In Value: A 1993 year model Ford L9000 white, Truck, with approximately 48569 miles and approximately 1,635 hours will be traded in on the new Tanker Truck (please provide in your proposal the trade-in value you are willing to pay for truck). This value will be subtracted from CLIN 0001 to determine the overall proposal price. It is each prospective offerors responsibility to coordinate the viewing and assessment of this equipment prior to proposal submission. For more information on this equipment or to schedule a viewing appointment, contact Linda Dunham at 870-268-2500 or by email at linda.dunham@swpa.gov. Pictures are attached. All proposals must be FOB Destination to include delivery of CLIN 0001 and removal of CLIN 0002. The Contractor must provide the VIN Number 30 days after award of contract and provide the vehicle 60 days after award of contract. The VIN number must be submitted to Southwestern Power Administration: One West Third Street, Attn: Jane Thomas, Tulsa, OK 74103. Phone: 918-595-6729. Delivery of new vehicle and removal of trade in vehicle will be at Southwestern Power Administration, Jonesboro Maintenance Unit, 305 North Floyd Street, Jonesboro, Arkansas 72401. Deliveries are accepted Monday through Thursday From 8:00 a.m. to 4:30 p.m. PROVISIONS/CLAUSES. The following Federal Acquisition Regulation (FAR) provisions apply to this solicitation: 52.212-1, Instructions to Offerors-Commercial Items; FAR 52.212-2 Evaluation -- Commercial Items (completed as follows:) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical Capability and Price Technical capability is significantly more important when compared to price. 52.212-3, Offeror Representations and Certifications-Commercial Items (the offeror must include a completed copy of this provision with their quote). The following FAR clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions-Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required to Implement Statues or Executive Orders-Commercial Items (to include the following clauses sited: FAR 52.203-6 Restrictions on Subcontractor Sales to the Government; FAR 52.219-6, Notice of Total Small Business Aside; FAR 52.219-8 Utilization of Small Business Concerns; FAR 52.219-14 Limitations on Subcontracting; FAR 52.219-28, Post-Award Small Business Program Representations; FAR 52.222-3, Convict Labor; FAR 52.222-19, Child Labor-Cooperation with authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; FAR 52.222-26, Equal Opportunity; FAR52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; FAR 52.222-36, Affirmative Action for Workers with Disabilities; FAR 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; FAR 52.222-39 Notification of Employee Rights Concerning Payment of Union Dues or Fees; FAR 52.222-50, Combating Trafficking in Persons; FAR 52.223-9 Estimate of Percentage of Recovered Material Content for EPA Designated Products; FAR 52.225-1 Buy American Act Supplies; FAR 52.225-5 Trade Agreements; FAR 52.225-13, Restriction on Certain Foreign Purchases; FAR 52.232-34, Payment by Electronic Funds Transfer-Other Than Central Contractor Registration; FAR 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels. The above Provisions and Clauses may be obtained via internet at http://farsite.hill.af.mil. Proposals must be signed, dated and received no later than August 28, 2008, 4:00 PM, Central Time at Southwestern Power Administration. SUBMIT PROPOSALS TO: Southwestern Power Administration Attn: Daniel Foyil One West Third Street Tulsa, OK 74103-3502 Please mark the outermost layer of proposal packaging with the solicitation number DE-RP75-08SW59548. LATE Proposals: Proposals or modification of Proposals received at the address specified for the receipt of proposals after the exact time specified for receipt of proposals WILL NOT be considered. All contractors must be registered in the Central Contractor Registration database located at http://www.ccr.gov prior to any contract award. Please submit the following information with each quote: Cage Code, DUNS number, Tax Identification Number, Prompt Payment Terms, Delivery Time, GSA Contract Number (if applicable), Date quote expires, warranty, line item unit price, line item total price, complete vehicle specifications listing and total cost. For additional information, please contact the Contracting Officer, Daniel Foyil at 918-595-6740 or by email at daniel.foyil@swpa.gov.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=8edc82e9f03ca0d7f8f653d1a348c0f3&tab=core&_cview=1)
- Record
- SN01650794-W 20080827/080825223356-8edc82e9f03ca0d7f8f653d1a348c0f3 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |