SOLICITATION NOTICE
71 -- CUSTOM-MADE GUN CABINET
- Notice Date
- 8/21/2008
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 337215
— Showcase, Partition, Shelving, and Locker Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Agency, South Region, ACA, Fort Campbell, ACA, Fort Campbell, Directorate of Contracting, Building 2174, 13 ? & Indiana Streets, Fort Campbell, KY 42223-1100
- ZIP Code
- 42223-1100
- Solicitation Number
- W91248-08-R-0019
- Response Due
- 9/3/2008
- Archive Date
- 11/2/2008
- Point of Contact
- shirley.banks, 270-798-7857<br />
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This acquisition is being advertised as a small business set aside. Fort Campbell, KY has a requirement for custom-made gun cabinets. Attached are specifications on each cabinet. The applicable NAICS code is: 337215, 500 employees. Vendors must provide tax identification number, Cage Code, and delivery time on quote. Contractors are reminded that Federal contracts may not be transferred without the Governments consent. The following Federal Acquisition Regulations (FAR) and (DFAR) apply to this solicitation: FAR 52.203-3; 52.203-6 Alt I; FAR 52.204-4; Far 52.204-7; FAR 52.212-1; FAR 52.212-2; FAR 52.212-3; FAR 52.212-4; FAR 52.212-5; FAR 52.219-6; FAR 52.219-8; FAR 52.219-14; FAR 52.222-3; FAR 52.222-19; FAR 52.222-21; FAR 52.222-26; FAR 52.222-35; FAR 52.222-36; FAR 52.222-37; FAR 52.225-13; FAR 52.232-33; FAR 52.237-3; FAR 52.247-34; FAR 52.252-2; DFARS 252.212-7001; DFARS 252.225-7001; DFARS 252.247-7023. Full Text of these provisions may be accessed on-line at http://farsite.af.mil. Award can only be made to those offerors that are registered through the Central Contractor Registration System at http://www.ccr.gov. All offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications Commercial Items, which can be obtained on line at http://farsite.af.mil. The evaluation factor will be based on a best value determination. Award(s) will be made to the vendor(s) whose proposal is most advantageous to the Government. Quotes are due no later than 3:00 CST, 03 September, 2008. Questions and quotes may be addressed to Angela Johnson, Contract Specialist, at angela.l.johnson@us.army.mil. M230 Gun Cabinets FFP 14 Each. Size 70 inch tall by 44 inch deep, 32 inch wide. Each cabinet will have 2 pull out carts that hold three M230 Guns. Each drawer will be closed across the front with perforated steel skin covering with 0.75 inch holes over entire front for visual access and will have a handle for push/pulling carts. Each cabinet will have 2 carts that hold 3 guns each, 6 per cabinet. Each cart will be 13.5 inch wide by 46 inch long, 66 inch tall. There will be 3 barrel clamps to provide additional stability. Each cart will be equipped with a UHMW liner. The carts will have 3 inch by 2 inch casters, 2 rigid and 2 swivel. A floor lock will be provided to secure cart for loading/unloading. The carts will be free to be moved away from cabinet. The carts will be secured to the cabinet with a padlock hasp. The sides, back, top and bottom will be solid. Finish will be flat back paint. Construction will be 1.5 inch square wall tubing frame with 16 gauge skin welded on. Entire cabinet will be powder coated. Shipped fully assembled. FOB: Destination M134 Gun Cabinet FFP 14 Each. Size: 65.57 inch tall by 42 inch deep, 32 inch wide. Each cabinet will have 10 drawers 12.25 inch wide, 5 inch tall and 42 inch deep. Each drawer will be open across the front for visual access and will have a handle formed into the front edge for pulling drawer out and allowing visual inspection of contents. The drawer slider will be rated at 500 lbs at 18 inch extension with the maxium extension to be 36 inch. Each drawer will be equipped with UHMW liner. Hinged steel doors will cover the drawers with padlock hasp to secure. The doors will be skinned with perforated steel with 0.75 inch holes over the entire surface. The sides, back, top and botton will be solid. Finish will be flat black paint. Construction will be 1.5 inch square wall tubing frame with 16 gauge skin welded on. Entire cabinet will be powder coated. Shipped fully assembled. FOB: Destination
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=a11225c991df6558e6d811e7b16e4d37&tab=core&_cview=1)
- Place of Performance
- Address: ACA, Fort Campbell Directorate of Contracting, Building 2174, 13.5 & Indiana Streets Fort Campbell KY<br />
- Zip Code: 42223-1100<br />
- Zip Code: 42223-1100<br />
- Record
- SN01647765-W 20080823/080821223400-a11225c991df6558e6d811e7b16e4d37 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |