SOLICITATION NOTICE
66 -- Training - ISO 17025:2005, ILAC G13:8/2007
- Notice Date
- 8/6/2008
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Department of Energy, Federal Locations, All DOE Federal Contracting Offices, 1955 Fremont Avenue MS-1221, Idaho Falls, ID 83415
- ZIP Code
- 83415
- Solicitation Number
- DE-RQ07-08ID01258
- Response Due
- 8/21/2008
- Archive Date
- 2/21/2009
- Point of Contact
- Wade Hillebrant, Contracting Officer, 208-526-0547,hillebtw@id.doe.gov;Janet Surrusco, Contract Specialist, 208-526-5477,
- Small Business Set-Aside
- N/A
- Description
- The Department of Energy, Idaho Operations Office (DOE-ID) isrequesting quotes to provide a training course for DOE-IDs Radiological & Environmental Sciences Laboratory (RESL) Auditor training specific to ISO 17025:2005 and ILAC G13:8/2007. This solicitation is issued as a Request for Quotation (RFQ). Reference Number is DE-RQ07-08ID01258. The NAICS code for this RFQ is 611430. Selection will be made on a best value basis in accordance with FAR Part 13, with technical being more important than cost. Quotes will be evaluated based on their submitted overall project plan, resumes provided, and the overall cost. Quote Submittal Instructions: Your quote must be submitted by no later than 5 p.m. MT, August 21, 2008. Your quote must include your DUNS number and TINS number. If you have a GSA contract for this type of work, please provide this number as well. Also include a point of contact. Your quote must include: 1. Task 1 information: The information listed under Task 1 of the Tasks section of this RFQ. 2. Instructor(s) biography. The instructor(s) biography included in this Plan will be no longer than three (3) pages. The instructors biography will demonstrate that he/she has, at a minimum, a Bachelors Degree in any of the Sciences or in Engineering; five (5) years laboratory experience; and two (2) years auditor or training experience specifically for ISO 17025 and ILAC G13:8/2007. Experience in ISO 9001 and ISO 43 must also be demonstrated. 2. Cost Quote: Must provide, at a minimum: (a) instructor hourly rate/cost of instruction; (b) materials; and (c) estimated travel cost of instructor. Travel costs are anticipated to be cost-reimbursable and based on Federal Travel Rates. A breakout of how this price was determined must also be included (airfare, per diem, etc.). The course must be held between Monday and Thursday, be no longer than four (4) days in length and taught prior to September 30, 2008. The schedule will be agreed upon between the DOE and the vendor after award. The class will consist of approximately 12 individuals but no more than 30 individuals. No more than ten (10) hours of training (including breaks) will be allowed in one day. In addition a lunch period must be allowed each day of training. DOE-ID will provide a suitable training facility and, upon request, an overhead projector/LCD projector, easels, DVD/VCR player, and television. Location: It is anticipated that training will occur at either the DOE-ID RESL building, located approximately 55 miles north of Idaho Falls, or at 1955 Fremont Avenue, Idaho Falls, Idaho 83415. Scope: The contractor is to provide auditor training that will specifically address the requirements for: International Standards Organization (ISO) 17025:2005 General Requirement for Measurement and Testing Laboratories International Laboratory Accreditation Councils (ILAC) G13:08/2007 Guidelines for the Requirements for the Competence of Providers of Proficiency Testing Schemes The contractor will provide all necessary labor, materials and supplies, other than those listed as being provided by DOE-ID, to accomplish the tasks as outlined under the Statement of Work, unless otherwise negotiated after contract award. Tasks: 1. Syllabus, biographies, and schedule: Contractor will deliver an overall syllabus outlining objectives, suggested course curriculum, topics of instruction, timeframes for each topic, and an overall course duration. In addition, a schedule of training dates available and any equipment support requirements, of those listed available by DOE-ID, will be provided. Within 7 days of award, DOE will provide comments to the contractor for incorporation into the syllabus. 2. Course materials: Contractor will provide a copy of all course materials for review and comment by DOE within 15 days of award. DOE will provide comments not later than 10 days from receipt. 3. Point of contact: Contractor will provide an individual to be the single point of contact for all matters pertaining to this course of instruction. 4. Final report/Certificates: Contractor will provide individual certificates for participants and a summary of participant evaluations within 20 days of completion of training. The summary of evaluations is to be provided electronically to the technical point of contact (TPOC) and Contract Specialist listed under the Invoice section. The training certificates are to be provided to the TPOC.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=004dcdb02b55089bab09ef0c5e353dc4&tab=core&_cview=1)
- Record
- SN01633029-W 20080808/080807104337-004dcdb02b55089bab09ef0c5e353dc4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |