Loren Data's SAM Daily™

FBO DAILY ISSUE OF JULY 03, 2008 FBO #2411
DOCUMENT

71 -- Customized Conference Table - Table Drawing

Notice Date

7/1/2008
 

Notice Type

Table Drawing
 

NAICS

337212 — Custom Architectural Woodwork and Millwork Manufacturing
 

Contracting Office

Department of the Air Force, Air Mobility Command, 60th CONS, 350 Hangar Ave. Bldg 549, Travis AFB, California, 94535-2632, United States
 

ZIP Code

94535-2632
 

Solicitation Number

F3Z0418170A001
 

Archive Date

7/29/2008
 

Point of Contact

Andrew J Pratt,, Phone: 707-424-7766, Josephine G Cobb,, Phone: (707) 424-7720
 

E-Mail Address

andrew.pratt-02@travis.af.mil, josephine.cobb@travis.af.mil
 

Small Business Set-Aside

Total Small Business
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Bids will be accepted on an all or none basis. The solicitation number is F3Z0418170A001; this solicitation is a request for quotation. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-26 and Defense DCN 20080513. This acquisition will be a 100% small business set-aside; the North American Industry Classification System (NAICS) code is 337212. The business size standard is 500 Employees. The Federal Supply Class (FSC) is 7110. The Standard Industrial Classification (SIC) is 2541. This request for quotation consists of the following items (all or none): Item 0001: Conference Table: Contractor shall provide all labor, tools, supplies, etc. to produce, deliver and assemble a conference table meeting the following specifications: Rectangular, 72"W x 228"L total size. Table top will be of 1 1/4" smooth Durabond "green" 100% sustainable wood (or equivalent) with inlay of medium oak finish HPL (high pressure laminate) w/phenolic backer. Table top has a black (color is integral, not applied), HPL mitered edge with a 22.5 degree beveled edge. Each angled edge is mitered and beveled creating a seamless solid surface appearance. The top mitered edge carries onto the top surface to create a 2" border around the entire table top. The HPL is mitered and cold rolled glued to the substrate to prevent expansion or contraction on the edge. Located in the center of table top is a riser, 16.5" high and 24" wide at its base with a top surface 14" wide. The riser is inset on the center of table top running down the center, leaving 24" of work surface around entire table top. The riser is of 1 1/4" smooth Durabond "green" 100% sustainable wood (or equivalent). Inside the riser there will be an elongated cutout on table top to allow wiring to pass between the riser and table base. The sides and top of riser will be finished with same medium oak HPL as table top and will be continuous without seams. The riser top will have a black HPL mitered and beveled edge similar to table top with the mitered edge carrying onto top surface of riser to create a 1 1/2" border around entire riser top. The HPL is mitered and cold rolled glued to the substrate to preclude expansion or contraction on the edge. A 1 1/4" lip around entire side of riser 4" up from table top to serve as a rest for phones around table. Lip will be of 3/4" Durabond "green" 100% sustainable wood (or equivalent), medium oak finish. It will be perpendicular to the sides of the riser and attached from inside riser, both glued and screwed. Holes w/grommets (3/r” black HT sleeve) will be cut on riser sides for phone lines (shall be done at time of installation to ensure exact location). One rectangular continuous platform base, 27 3/4 “in height, to support table top and recessed 21” from edge of table top. The base will be of 1 ¼” smooth Durabond “green” 100% sustainable wood (or equivalent), and assembled using miter fold process. Fronts of drawers will be flush with slightly recessed 2.5” apron (recessed to beveled edge of table top) around and under edge of table top, giving a solid 2.5” apron reveal around entire table when drawers are closed. Apron and drawer fronts finished with black HPL. Drawers mounted on full-extension ball bearing slides. Table top in four sections connected with biscuits and recessed draw bolts. Power/data modules located on table top just below riser and 24” from table edge at each of the 12 positions around table, with each module having one ac outlet and one each phone and data port. Modules will be recessed and flush with table top and have retractable covers which will never be in the way of user (when open, they are flush and convert is tucked inside module, and when closed, they are flush with table top.) A power/data module is located on the interior of table base at each of the 12 positions around the table, with an additional one at the head position at the table. Interior modules will have two ac outlets one data port and one phone port. Each of the 12 positions around the table will have an on-off switch on side of riser which operates on an individual basis an orange strobe light situated on the top center of the riser. All table power requirements will connect to power sources via three-pronged plugs, not hardwired. Two brackets mounted in the center of base (exact location will be established at time of installation) to accommodate two 48-port patch panels, providing easy accessibility to front and rear of patch panels (patch panels user furnished and installed). Will require placement of access holes with grommets for power, phone, and data cables at time of installation. All HPL inlay on table top, base, riser, apron, and drawers to be cold rolled glued for durability. See attachment for the drawing. Within ten days following contract award and prior to start of manufacturing process, vendor will provide a 3-D color CAD rendering to user for review and approval and will not proceed without this approval. Delivery, final assembly, and installation of conference table shall be provided during normal working hours. Item 0002: Shipping to following address: 501 Hangar Ave, Bldg 31, Travis AFB, CA 94535. The following provisions and/or clauses apply to this acquisition. FAR 52.212-3, Offeror Representations and Certifications-Commercial Items. An offeror shall complete only paragraph (j) of this provision if the offeror has completed the annual representations and certificates electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (b) through (i) of this provision. 52.212-3 shall be completed as noted above and submitted with the offer. Offerors must comply with all instructions contained in FAR 52.212-1 Instructions to Offerors - Commercial. 52.233-4 Applicable Law of Breach of Contracts. FAR 52.204-7 Central Contractor Registration. FAR 52.212-4, Contract Terms and Conditions - Commercial Items will be incorporated into any resultant Purchase Order by reference. 52.219-6, Notice of Total Small Business Set Aside. 52.219-28 Post Award Small Business Program Representation. 52.222-19, Child Labor- Cooperation with Authorities and Remedies. 52.222-3 Convict Labor. 52.222-50 Combating Trafficking in Persons. 52.232-33, Payment by Electronic Funds- Central Contractor Registration. 52.233-3, Protest After Award. 52.247-34, F.O.B. Destination.. 52.253-1, Computer Generated Forms. 252.204-7004 Alt A, Required Central Contractor Registration. 252.232-7003, Electronic Submission of Payment Requests; requests for payments must be submitted electronically through the Wide Area WorkFlow system at https://wawf.eb.mil. 252.225-7001, Buy American Act and Balance of Payment Program. 252.225-7002, Qualifying Country Sources as Subcontractors. 52.247-7023 Transportation of Supplies by Sea Alternate III. 252.211-7003 Item Identification and Validation. FAR 52.212-2 Evaluation - Commercial Items; paragraph (a) to this provision is completed as follows: price and technical capability of the item offered to meet the Government requirement. FAR 52.212-5, Contract Terms and Condition Required to Implement Statues or Executive Orders - Commercial Items (Deviation). FAR 52.252-2 Clauses Incorporated by Reference, with the following Internet addresses filled-in: http://www.arnet.gov/far and http://farsite.hill.af.mil; clauses may be accessed electronically in full text by going to either of these two Internet addresses. 52.252-6, Authorized Deviation in Clauses with the following fill-in: Defense Federal Acquisition Regulation 48 CFR Chapter 2. DFARS 252.212-7001, Contract Terms and Conditions (Deviation). AFFARS 5352.201-9101 Ombudsman. 52.222-41 Service Contract Act of 1965. 52.222-42 Statement of Equivalent Rates for Federal Hires. 52.222-21, Prohibition of Segregated Facilities. 52.222-26, Equal Opportunity. 52.222-36, Affirmative Action for Workers with Disabilities. 5352.201-9101 Ombudsman (10 Aug 05). 52.209-6 Protecting the Government’s Interest. Vendors must be actively registered with the Central Contractor Registration (CCR) and Online Representations and Certifications (ORCA). The CCR website is http://www.ccr.gov and the ORCA website is https://orca.bpn.gov. Contractors are also asked to submit their TAX ID number with their proposal. Quotes must be received at the 60th Contracting Squadron, LGCC flight, no later that 3:00 p.m. PST on July 14, 2008. Quotes may be transmitted by e-mail or to FAX number (707) 424-5189. The point of contact for this solicitation is Andrew Pratt, 2LT, Contract Specialist, (707) 424-7766, andrew.pratt-02@travis.af.mil. Alternate point of contact is Josephine Cobb, Contracting Officer, (707) 424-7720, josephine.cobb@travis.af.mil.
 

Web Link

FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=887af6930840da1d6df088d0a7b92303&tab=core&_cview=1)
 

Document(s)

Table Drawing
 

File Name: This is the drawing specifications for the table. (Table Drawing.pdf)

Link: https://www.fbo.gov//utils/view?id=f10c7958c30f08930418ee27523d66e5

Bytes: 63.56 Kb
 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: Bldg 31, 501 Hangar Ave., Travis AFB, California, 94535, United States

Zip Code: 94535
 

Record

SN01604643-W 20080703/080701220855-887af6930840da1d6df088d0a7b92303 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |