SOLICITATION NOTICE
30 -- MULTI-TASKING CNC LATHE WITH SECOND SPINDLE AND LOWER TURRET
- Notice Date
- 6/20/2008
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 423830
— Industrial Machinery and Equipment Merchant Wholesalers
- Contracting Office
- NASA/Goddard Space Flight Center, Code 210.M, Greenbelt, MD 20771
- ZIP Code
- 20771
- Solicitation Number
- NNG08LJ252078Q
- Response Due
- 7/5/2008
- Archive Date
- 6/20/2009
- Point of Contact
- Nadja Hardy, Contract Specialist for Simplified Acquisitions, Phone 301-286-3462, Fax 301-286-9159, - Eric Jackson Newman, Contracting Officer, Phone 301-286-2489, Fax 301-286-0321
- E-Mail Address
-
nadja.hardy@nasa.gov, Eric.J.Newman@nasa.gov
- Small Business Set-Aside
- N/A
- Description
- NASA/GSFC has a requirement for the following, Quantity 1:Requirements for New Multi-tasking CNC Lathe with Second Spindle and Lower Turret:Vendors submitting quotes for this procurement are expected to offer a fair market tradein value for our Wasino Mill Turn Machine, Model# LJ10MC, Serial# 889, Manufactured in1991. This procurement is for a new machine to replace the Wasino Mill Turn Machine. Proposed machine must not require any special foundation requirements and must be fullyoperational and warrantable on our existing shop floor, which is 10 thick concrete.AXIS TRAVELS:B-Axis.................................. 225 degrees(0.0001 degree increments)Y-Axis.................................. +/- 3.15"X-Axis.................................. 22.83"Z-Axis 60".............................. 60.82"X2 Axis Lower........................... 5.91"Z2 Axis Lower 60"....................... 58.66"Second Headstock W-Axis 60"............. 61.02"2ND SPINDLE C-AXIS 0.0001 DEGREE INCR..0001 degree positioning of C and B axisnine station lower turretX-axis ball screw core cooling systemMilling spindle horsepower 25 Hp64 bit twin engine RISC-CPUminimum 20 GB Hard Disk Drive16,000,000 pulse encoders on all linear axisSub-Micron input and Nano control (0.0001mm / 0.00001in.)Tool tip center control 3D tool diameter offset for 5-axis simultaneous machining Virtual machining with 3D simulation displaysB-Axis Positioning 225 in 0.0001 incrementsB-Axis Index 5 Degree (Coupling Clamp)12,000 RPM mill spindle motor 25 HP 5,000 RPM main and secondary spindles 25HPTool life monitoring systemTool measurement system.Main and 2nd Spindle Synchronization40 tool Capto magazine Standard tooling package CAPTOStandard tooling package TurningOn control graphical programming systemconversational and G code capability on controlembedded crash prevention zones for lower turret machine operation training per personmachine program training per personmachine maintenance training per personmilling spindle synchronous tappingUSB port I/FLAN port8" thru hole chuck for main spindle8" main chuck for secondary spindlepower transformer 440 to machine requirementCONSEP Chip conveyor with machine front access requiredTail center attachmentLNS steady rest attachment8mg program sizeRenishaw MP700 Probe w/ Inspection Plus Software & TrainingSimultaneous 5 Axis FunctionC1-C2 Synchronous FunctionOn Site Applications Assistance (8 Days)Second Spindle Draw Tube (2" x 30" deep cap.)213 PSI Through Spindle CoolantStandard machine operational and maintenance manuals and schematics to be provided.SHIPPING: FOB to our door or qualified rigger of our choice. Vendor must coordinate rigging withour Technical Representative designated for this procurement.DELIVERY SCHEDULE:Within 6 months from award date (calendar days).TRAINING:To be provided within 2 weeks after delivery.This notice is a combined synopsis/solicitation for commercial items prepared inaccordance with the format in FAR Subpart 12.6, as supplemented with additionalinformation included in this notice. This announcement constitutes the only solicitation,which is issued as a Request for Quotation (RFQ); quotes are being requested and awritten solicitation will not be issued. Offerors are required to use the On-Line RFQsystem to submit their quote. The On-line RFQ system is linked above or it may beaccessed at http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin=. Theinformation required by FAR Subpart 12.6 is included in the on-line RFQ.The Government intends to acquire a commercial item using FAR Part 12 and the SimplifiedAcquisition Procedures set forth in FAR Part 13.This procurement will be processed using the procedure in FAR Part 13 using SimplifiedAcquisition Procedures, and the Procedures set forth in FAR Sub Part 13.5 "Test Programfor Certain Commercial Items".This procurement will be a Full and Open Competition and is being conducted under theauthority of FAR Subpart 13.5, Test Program for Certain Commercial Items. The followingprocedures apply to this procurement. The evaluation factors listed in this solicitationdo not necessarily indicate their order of importance and subfactors, if any, may not beindicated. A competitive range determination may not be made. Award without discussionsmay be made. Negotiations may be held with one or more offerors but not necessarily withall offerors in the competitive range if one is established. Comparative evaluations ofoffers may be made. Offers will be evaluated inclusive of transportation charges from theshipping point of the supplier to the delivery destination. Award will be based upon anassessment of price and other factors. The award document may be a purchase order or acontract at the discretion of the Contracting Officer. Notifications to unsuccessfulofferors shall be given only if requested. Questions regarding this acquisition must be submitted in writing via e-mail tonadja.hardy@nasa.gov no later than 06/27/2008. It is the quoter's responsibility tomonitor this site for the release of amendments (if any). Potential quoters will beresponsible for downloading their own copy of this notice, the on-line RFQ and amendments(if any).An ombudsman has been appointed - See NASA Specific Note "B". Any referenced notes may be viewed at the following URLs link below.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=19ee899dd16fdaa7091f339be7fc3853&tab=core&_cview=1)
- Record
- SN01597994-W 20080622/080620222507-2fa2f92a5c35a62fa0e414bdf16a6706 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |