SOLICITATION NOTICE
99 -- Beech-300 Avionics Upgrade, ESIS Battery Mount
- Notice Date
- 6/7/2008
- Notice Type
- Modification/Amendment
- Contracting Office
- Department of Transportation, Federal Aviation Administration (FAA), Mike Monroney Aeronautical CTR, FEDERAL AVIATION ADMINISTRATION, AMQ-310 AMC - Aeronautical Center (Oklahoma City, OK)
- ZIP Code
- 00000
- Solicitation Number
- 6762
- Response Due
- 6/13/2008
- Archive Date
- 6/28/2008
- Point of Contact
- Cyndy Cooper, (405) 954-2601
- Small Business Set-Aside
- N/A
- Description
- The Federal Aviation Administration (FAA), Aviation System Standards, Flight Inspection Flight Programs Division, AJW-314 proposes to acquire the below list of items by issuance of a single source purchase order to Raytheon Aircraft Parts (RAPID). These items will be installed onto the FAA's Beech-300 Flight Inspection Aircraft as a part of the aircraft avionics inspection equipment upgrade.CLINDESCRIPTIONQTY1ESIS Battery Mount, P/N S53001-01172Aural Tone Generator, DB-630-004183Annun Dim Post, P/N 22M185184Legend, Assy, Blank, P/N 101-384084-33365Fuel Flow Transmitter, P/N -2-81-301366Torque Transducer, TRQ-XMTR, P/N 130-389002-3367Glare Shield Assy, P/N 101-322002-613178Absorber Assembly, Vibration P/N 130-340729-0001349Isolator Assy, P/N 90-341652-51710Plenum Bracket, 101-530704-113411Fan Assy Right Inst Cooling, P/N 101-341779-333612Screen Cooling Fan, P/N 101-341779-93613Legend, Assy "Rud Boost Off", 101-384084-11731714Cable, Rudder Trim, P/N 101-524089-51715Plate Back Sub Panel Structure, P/N130-322024-00031716Bezel, P/N 130-322016-00271717Mic Switch, Control Wheel, P/N 601-43003618Switch DPDT P/N P2-1103113619Switch/Annun, On P/N 132516-P410318205V Lighting Power Supply, SC-841A, P/N 501-1318-011921Audio AMP Mount, P/N 51526822Washer, Bonding, 0.450 ID, P/N 100951DD032YX36 RAPID is the original manufacturer of these items and no known sources are authorized to resell these items. This acquisition of parts for the Beech-300 Flight Inspection Aircraft must be type certified in accordance with the Federal Aviation Regulation procedures set forth under Certification Parts 23, 25. 27 and 29. Only the specific units identified by part number are approved parts for use on the FAA's Flight Inspection Aircraft. Purpose of Announcement: In accordance with the FAA Acquisition Management System (AMS) paragraph 3.2.2.4, the purpose of this announcement is to inform industry of the basis of the FAA's decision to contract with a selected source via single source procurement.This announcement is for information purposes only, not a Solicitation/Request for Proposal. All responses to this announcement must be directed to Cynthia Cooper, Contracting Officer (405) 954-2601 or cynthia.cooper@faa.gov by 3:00 p.m. CST on June 13, 2008.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=16d620eb5c9b7e3a9997d2f10df0cfed&tab=core&_cview=1)
- Record
- SN01589033-W 20080609/080607213035-16d620eb5c9b7e3a9997d2f10df0cfed (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |