SOLICITATION NOTICE
71 -- Amendment #3 - Questions & Answers
- Notice Date
- 6/2/2008
- Notice Type
- Modification/Amendment
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Agency, South Region, ACA, Fort Sill, ACA, Fort Sill, Directorate of Contracting, P.O. Box 33501, Fort Sill, OK 73503-0501
- ZIP Code
- 73503-0501
- Solicitation Number
- W9124L08T0066
- Response Due
- 6/6/2008
- Archive Date
- 8/5/2008
- Point of Contact
- Amber VanHoozer, 580-442-2869
- Small Business Set-Aside
- N/A
- Description
- Question: The RFQ asked that the skid be 1 inch X 3 inch channel. The closest size available is 1.410 inch X 3 inch. Is this acceptable? Answer: Yes. Question: After reviewing the specifications we are concerned about the point where the two benches are set side by side creating a pinch point. We are suggesting that we shorten the benches by 1/2 inch to eliminate this pinch point and simulate the spacing between the slats on the benches. Would this be acceptable? Answer: Yes. Question: Are the benches to be welded to the skid or bolted? Answer: Either is acceptable. Question: If they are bolted we are suggesting adding gussets to the skid to insure that remain square when the benches are not attached. Would this beacceptable? Answer: They will not be un-bolted. They will be removed as a unit fromthe vehicle. A gusset is acceptable. Question: To insure that we paint the units correct, we need the military spec. on the paint. Answer: Sherwin Williams has the color. Military Tan CARC Question: In order to insure we meet your needs we would like more information on the removable brace between the benches in the isle area. The desired height location, number per bench, size? Answer: Two per unit. Using steel or aluminum, construct a brace that will attach to the top of the bench, and serve as a guard rail for personnel and as a structural support during installation and removal from the vehicle. A simple bar, maybe 1 inch diameter with a 'Hitch pin' type attachment would suffice.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=f01e4c5d262fa1130589f3f159e74b38&tab=core&_cview=1)
- Place of Performance
- Address: ACA, Fort Sill Directorate of Contracting, P.O. Box 33501 Fort Sill OK
- Zip Code: 73503-0501
- Zip Code: 73503-0501
- Record
- SN01585056-W 20080604/080602220624-f01e4c5d262fa1130589f3f159e74b38 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |