Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF MAY 25, 2008 FBO #2372
SOLICITATION NOTICE

71 -- This amendment is Admendment #1 pertaining to Solicitation #W9124L-08-T-0066.

Notice Date
5/23/2008
 
Notice Type
Modification/Amendment
 
NAICS
332999 — All Other Miscellaneous Fabricated Metal Product Manufacturing
 
Contracting Office
Department of the Army, Army Contracting Agency, South Region, ACA, Fort Sill, ACA, Fort Sill, Directorate of Contracting, P.O. Box 33501, Fort Sill, OK 73503-0501
 
ZIP Code
73503-0501
 
Solicitation Number
W9124L08T0066
 
Response Due
6/4/2008
 
Point of Contact
Amber VanHoozer, 580-442-2869
 
Small Business Set-Aside
Total Small Business
 
Description
This amendment is to modify specifications under CLIN 0001 and to correct NAICS code to 332999, size standard is 500 employees. CLIN 0001 is revised to read:: CLIN 0001: Troop seating (Military benches) to carry students in 5-Ton Vehicles for the BOLC-II Course. Requirement: 120 units. Two units per 5-ton vehicle. 60 5-ton vehicles. Combined dimension will be 6 X 11. Each unit and supporting pieces shall meet the following specifications: Primary material may be aluminum or steel except for the base which will be steel. Finish will be powder coat, galvanize or plastic dip but must withstand heavy foot traffic. Finish color will be desert sand. Base of unit will be 72X66 rectangle constructed from 1X3 steel channel, open side down (hereafter referred to as the skid) 72 ends; 66 sides. Construct two (2) benches with seat and backrest but without armrests for each unit. Benches will be 66 long, 34 tall and 24deep. The top of the seat will be approximately 17 from the base. Two benches will be attached to the top of each skid, back to back, allowing a 24 space between the two (2) seat-backs with the legs attached on the end of the skid. On each 72 side, a 13/16 diameter hole shall be drilled exactly 4 from each end and centered. The unit must align with four (4) pre-drilled holes in the floor of the 5-ton vehicles and shall be the same pattern on every bench set. Welded joints are preferred due to mobility with exception of mounting to the skids. Each unit shall not exceed 250 lbs per unit. Cross-bracing shall be applied to account for: 1. Lateral forces from transporting Soldiers on a moving vehicle and 2. Repeated loading on and off of vehicle bed that is 60 high. Two (2) easily removable braces shall be provided with each unit to attach between the top of the seat- backs near the ends (within two inches) to provide stability when loading and unloading benches from the vehicles and for a safety rail for the personnel standing between the benches. Benches shall be durable enough to withstand repeated hard usage from Soldiers standing and walking on the seating surface while wearing field gear. Each Soldier (including field gear) will weigh between 170 and 300 lbs. Seat and backrest shall be constructed to preclude excessive damage to clothing and field gear from sliding across it. Bidders shall include specifications, pictures and/or drawings with submission of bids. The requirement shall be FFP. Delivery shall begin July 25, 2008. FOB: Destination Ship to: Bldg 2440, Fort Sill, OK, ATTN: Jon Fizzell, Bldg 2440, 428th Field Artillery Brigade, Fort Sill, OK 73503. Notification for delivery must be 48 hours in advance.
 
Web Link
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=9d25ca6b0707685d3d012b3357cbdf7e&tab=core&_cview=1)
 
Place of Performance
Address: ACA, Fort Sill Directorate of Contracting, P.O. Box 33501 Fort Sill OK
Zip Code: 73503-0501
 
Record
SN01580034-W 20080525/080523215141-9d25ca6b0707685d3d012b3357cbdf7e (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.