SOLICITATION NOTICE
28 -- LINER,COMPRESSOR CO
- Notice Date
- 5/14/2008
- Notice Type
- Presolicitation
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), DEPARTMENT OF THE AIR FORCE; 3001 STAFF DR STE 2AG1 109B; TINKERAFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- FA8104-08-R-0326
- Response Due
- 6/30/2008
- Point of Contact
- Chris L Jones, Phone 405-739-5497, Fax 405-734-8106
- E-Mail Address
-
hristopher.l.jones@tinker.af.mil
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20300871743Item: 0001NSN: 2840011873059PNPN LINER,COMPRESSOR COP/N: 9992M74G21, Description: The HPC Forward Stator Stage 4 liner is a compressorairflow device. Function is to provide the stage 4 flowpath and theblade tip rub contact for the stage 4 blades. The dimensions areapproximately 5.5 inches in length and 1.25 inches wide and.5 inchesradius. Actual dimensions unavailable due to lack of engineeringdrawings. Material consists of Titanium with METCO plasma coating on theblade rub land.Total Line Item Qty: 0 (Description Line Item Only) Applicable to: KC-135R PR Number(s): FD20300871743Item: 0001AA New Manufactured MaterialNSN: 2840011873059PNPN LINER,COMPRESSOR COP/N: 9992M74G21, Description: The HPC Forward Stator Stage 4 liner is a compressorairflow device. Function is to provide the stage 4 flowpath and theblade tip rub contact for the stage 4 blades. The dimensions areapproximately 5.5 inches in length and 1.25 inches wide and.5 inchesradius. Actual dimensions unavailable due to lack of engineeringdrawings. Material consists of Titanium with METCO plasma coating on theblade rub land.Total Line Item Qty: Ranges as follows: (29-115) and (116-174) Applicable to: KC-135RDestn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 30JUN2008, 29-115 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 30JUN2008, 116-174 PR Number(s): FD20300871743Item: 0001AB - New/Unused Government or Commercial SurplusNSN: 2840011873059PNPN LINER,COMPRESSOR COP/N: 9992M74G21, Description: The HPC Forward Stator Stage 4 liner is a compressorairflow device. Function is to provide the stage 4 flowpath and theblade tip rub contact for the stage 4 blades. The dimensions areapproximately 5.5 inches in length and 1.25 inches wide and.5 inchesradius. Actual dimensions unavailable due to lack of engineeringdrawings. Material consists of Titanium with METCO plasma coating on theblade rub land.Total Line Item Qty: Ranges as follows: (29-115) and (116-174) Applicable to: KC-135RDestn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 30JUN2008, 29-115 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 30JUN2008, 116-174 Electronic procedure will be used for this solicitation. Award will be made only if the offeror, the product/service, or themanufacturer meets qualification requirements at the time of award inaccordance with FAR clause 52.209-1. The solicitation identifies theoffice where additional information can be obtained concerningqualification requirements as cited in each individual solicitation. This acquisition may/does involve technology that has a military orspace application. The only US contractors who may participate arethose that are certified and registered with DLSC (1-800-352-3572) andhave a legitimate business purpose. US contractors must submit a copyof their current, approved DD Form 2345 with their request forsolicitation. The form, including instructions for completing the form,is available athttp://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html. The solicitation/data package will be mailed to the datacustodian identified in block 3 of the DD Form 2345. The extent offoreign participation has not yet been determined. MOU country sourcesmust contact the Contracting Officer within 15 calendar days of the dateof this synopsis notice to receive a copy of the solicitation at thetime it is initially issued. Issuance of the RFP will not be delayed toreview requests from MOU country sources received after 15 days or fromnon-MOU country sources. Nothing in this notice contradicts otherrestrictions, identified in the synopsis notice or solicitation,regarding eligible sources (e.g., if this is a small-business set-aside,foreign sources may not participate as potential prime contractors butcould, if otherwise eligible, participate as subcontractors).See Note(s) 25.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=d266210e44559dd54b56a167d2c45032&tab=core&_cview=1)
- Record
- SN01573094-W 20080516/080514220515-d266210e44559dd54b56a167d2c45032 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |