MODIFICATION
78 -- Outdoor Physical Fitness Equipment and Installation
- Notice Date
- 4/16/2008
- Notice Type
- Modification/Amendment/Cancel
- Contracting Office
- Department of the Army, Army Contracting Agency, South Region, ACA, Fort Sam Houston, 2107 17th Street, Bldg 4197, Ste 15 , Fort Sam Houston, TX 78234
- ZIP Code
- 78234
- Solicitation Number
- W45MW280310400
- Response Due
- 4/18/2008
- Point of Contact
- > A FedBid.com,, Phone: 866-288-3535
- E-Mail Address
-
clientservices@fedbid.com
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W45MW280310400 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-24. The associated North American Industrial Classification System (NAICS) code for this procurement is 713990 with a small business size standard of $6M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2008-04-18 18:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be San Antonio, TX 75211 The USA ACA Ft. Sam Houston requires the following items, Meet or Exceed, to the following: LI 001, Pull-Up and Dip Station Installed Dim. (LxWxH)=311-1/4x39-1/4x78-1/2, parts include powder-coated steel, cast aluminum post caps, rubber handles, hand/foot grips shall be weatherproof rubber, steel and stainless steel hardware, and plastic safety covers. All metal parts shall be powder-coated with collection rate over 95% and thickness >79 micrometers, fasteners shall be countersunk and/or have rounded heads, protruding nor more than 2 threads. Color(s) shall be Dark Green and Tan. All equipment shall have rounded corners and fully rounded end caps on all vertical posts. All equipment shall be designed for individuals weighing up to 330 lbs, 1, EA; LI 002, Single Horizontal Bar, Installed Dim. (LxWxH)= 411-1/2x41/2x78-1/2 handlebar heights 72-1/2, parts include powder-coated steel, cast aluminum post caps, and steel and stainless steel hardware. Foundation posts shall be 4 to 5.5 in diameter, main post thickness shall be >3.0mm, other pipe thickness shall be >2.75mm, bearings shall be hydraulically-pressed, waterproof, hand/foot grips shall be weatherproof rubber. All metal parts shall be powder-coated with collection rate over 95% and thickness >79 micrometers, fasteners shall be countersunk and/or have rounded heads, protruding nor more than 2 threads. Color(s) shall be Dark Green and Tan. All equipment shall have rounded corners and fully rounded end caps on all vertical posts. All equipment shall be designed for individuals weighing up to 330 lbs., 1, EA; LI 003, Double Sit-Up Board, SM, Installed Dim. (LxWxH)= 53-1/2x311-1/2x23-1/2, foundation posts shall be 4 to 5.5 in diameter, main post thickness shall be >3.0mm, other pipe thickness shall be >2.75mm, bearings shall be hydraulically-pressed, waterproof, hand/foot grips shall be weatherproof rubber. All metal parts shall be powder-coated with collection rate over 95% and thickness >79 micrometers, fasteners shall be countersunk and/or have rounded heads, protruding nor more than 2 threads. Color(s) shall be Dark Green and Tan. All equipment shall have rounded corners and fully rounded end caps on all vertical posts. All equipment shall be designed for individuals weighing up to 330 lbs., 1, EA; LI 004, Parallel Bars, Installed Dim. (LxWxH)= 710-1/2x211-1/2x43-1/4, foundation posts shall be 4 to 5.5 in diameter, main post thickness shall be >3.0mm, other pipe thickness shall be >2.75mm, bearings shall be hydraulically-pressed, waterproof, hand/foot grips shall be weatherproof rubber. All metal parts shall be powder-coated with collection rate over 95% and thickness >79 micrometers, fasteners shall be countersunk and/or have rounded heads, protruding nor more than 2 threads. Color(s) shall be Dark Green and Tan. All equipment shall have rounded corners and fully rounded end caps on all vertical posts. All equipment shall be designed for individuals weighing up to 330 lbs., 1, EA; LI 005, Power Rower, Installed Dim. (LxWxH)= 36x32x26, parts include powder-coated steel, rubber stoppers, steel and stainless steel hardware, and plastic safety covers. Hand/foot grips shall be weatherproof foundation posts shall be 4 to 5.5 in diameter, main post thickness shall be >3.0mm, other pipe thickness shall be >2.75mm, bearings shall be hydraulically-pressed, waterproof, hand/foot grips shall be weatherproof rubber. All metal parts shall be powder-coated with collection rate over 95% and thickness >79 micrometers, fasteners shall be countersunk and/or have rounded heads, protruding nor more than 2 threads. Color(s) shall be Dark Green and Tan. All equipment shall have rounded corners and fully rounded end caps on all vertical posts. All equipment shall be designed for individuals weighing up to 330 lbs., 1, EA; LI 006, Seated Chest Press, SM, Installed Dim. (LxWxH)= 59-1/4x22-3/4x61-1/2, foundation posts shall be 4 to 5.5 in diameter, main post thickness shall be >3.0mm, other pipe thickness shall be >2.75mm, bearings shall be hydraulically-pressed, waterproof, hand/foot grips shall be weatherproof rubber. All metal parts shall be powder-coated with collection rate over 95% and thickness >79 micrometers, fasteners shall be countersunk and/or have rounded heads, protruding nor more than 2 threads. Color(s) shall be Dark Green and Tan. All equipment shall have rounded corners and fully rounded end caps on all vertical posts. All equipment shall be designed for individuals weighing up to 330 lbs., 1, EA; LI 007, Seated Lat Pull, SM, Installed Dim. (LxWxH)= 56x25-1/2x55, foundation posts shall be 4 to 5.5 in diameter, main post thickness shall be >3.0mm, other pipe thickness shall be >2.75mm, bearings shall be hydraulically-pressed, waterproof, hand/foot grips shall be weatherproof rubber. All metal parts shall be powder-coated with collection rate over 95% and thickness >79 micrometers, fasteners shall be countersunk and/or have rounded heads, protruding nor more than 2 threads. Color(s) shall be Dark Green and Tan. All equipment shall have rounded corners and fully rounded end caps on all vertical posts. All equipment shall be designed for individuals weighing up to 330 lbs, 1, EA; LI 008, Sit-Up Bench, Installed Dim. (LxWxH)=66-3/4x26-1/2x25-1/4, parts include powder-coated steel, cast aluminum post caps, steel and stainless steel hardware, and plastic safety covers. Grips shall be weatherproof, foundation posts shall be 4 to 5.5 in diameter, main post thickness shall be >3.0mm, other pipe thickness shall be >2.75mm, bearings shall be hydraulically-pressed, waterproof, hand/foot grips shall be weatherproof rubber. All metal parts shall be powder-coated with collection rate over 95% and thickness >79 micrometers, fasteners shall be countersunk and/or have rounded heads, protruding nor more than 2 threads. Color(s) shall be Dark Green and Tan. All equipment shall have rounded corners and fully rounded end caps on all vertical posts. All equipment shall be designed for individuals weighing up to 330 lbs., 1, EA; LI 009, Concrete Polymeric Steps, Installed Dim. (LxWxH)=2x2x2, 1.5x2x2, 1x2x2, steps are to be graduated in size in ascending order. Steps are to be fabricated on site and reinforced concrete for durability. Steps need to be painted traffic yellow with non-skid paint on the step landings., 1, EA; LI 010, Design, Delivery and Installation, 1, EA; For this solicitation, USA ACA Ft. Sam Houston intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA Ft. Sam Houston is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified herein below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to wendy.herculesdesamuels@us.army.mil (NOT THROUGH FEDBID.COM) so that they are received at that email address no later than the closing date and time for this solicitation. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. Delivery shall be made within 60 days or less after receipt of order (ARO). CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. Site Visit to held on 14 April 2008 at 10:00 a.m.. POC is Mark Inman 210-221-3687 mark.inman@amedd.army.mil
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=89351bcd6340bf802e3e9faacad7a98f&tab=core&_cview=1)
- Place of Performance
- Address: San Antonio, TX 75211
- Zip Code: 75211-4569
- Zip Code: 75211-4569
- Record
- SN01555322-W 20080418/080416220427-89351bcd6340bf802e3e9faacad7a98f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |