SOLICITATION NOTICE
28 -- CONE, EXHAUST ACFT
- Notice Date
- 12/31/2007
- Notice Type
- Solicitation Notice
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; 3001 STAFF DR STE 2AG1 109B; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- FA8104-08-R-0180
- Response Due
- 1/15/2008
- Archive Date
- 5/14/2008
- Point of Contact
- Lindsay Johnson, Phone 405-739-7580, Fax 405-734-5493, Email lindsay.p.johnson@tinker.af.mil
- E-Mail Address
-
Email your questions to Lindsay Johnson
(lindsay.p.johnson@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- NOTE-THIS IS A COMBINED SYNOPSIS/SOLICITATION PR Number(s): FD20300870720 Item: 0001 NSN: 2840011832043PNPN CONE, EXHAUST ACFT P/N: 301-463-915-0, Description: Description: Conical shaped center bored for access to the mounting bolts for the rear flange and the LPT Plug. Function: To attach to the front flange of the fan disk and provide an axial mounting for the forward spinner cone. It also helps to provide an ejection path for any FOD that enters the fan area while the engine is running by forcing it to the outer edge of the fan where it can be ejected overboard with by pass air. Dimensions: Approximate dimensions are 22 inches in with on the outer rear diameter, 12 inches on the forward flange, 13 inches in depth, with a center bore of approximately 10 inches. The weight of the rear spinner cone is approximately 15 lbs.. Material: Consists of titanium alloy forgings (AL 2618). Total Line Item Qty: 5.0000 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31JUL2009, 5.00 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31JUL2009, 21.00 PR Number(s): FD20300870720 Item: 0002 NSN: 2840011832043PNPN CONE, EXHAUST ACFT P/N: 301-463-915-0, Description: Description: Conical shaped center bored for access to the mounting bolts for the rear flange and the LPT Plug. Function: To attach to the front flange of the fan disk and provide an axial mounting for the forward spinner cone. It also helps to provide an ejection path for any FOD that enters the fan area while the engine is running by forcing it to the outer edge of the fan where it can be ejected overboard with by pass air. Dimensions: Approximate dimensions are 22 inches in with on the outer rear diameter, 12 inches on the forward flange, 13 inches in depth, with a center bore of approximately 10 inches. The weight of the rear spinner cone is approximately 15 lbs.. Material: Consists of titanium alloy forgings (AL 2618). Total Line Item Qty: 5.0000 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31JUL2009, 5.00 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31JUL2009, 21.00 Electronic procedure will be used for this solicitation. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. See Note(s) 25.
- Record
- SN01477529-W 20080102/071231223233 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |