MODIFICATION
84 -- Plate Carrier - Modification to Sources Sought
- Notice Date
- 12/14/2007
- Notice Type
- Modification
- Contracting Office
- M67854 Quantico, VA
- ZIP Code
- 00000
- Solicitation Number
- M6785408I3004
- Response Due
- 1/15/2008
- Point of Contact
- Ms. S. Leigh D'Lugos Phone: 703-432-3187 Cell: 540-455-8037
- E-Mail Address
-
susan.dlugos.ctr@usmc.mil
- Description
- The following information is provided to give respondents the ability to assess plate carrier design compatibility with the MTV cummberbund and its associated components: The MTV cummerbund is a rectangular two piece construction of 1000 denier cordura with a plastic stiffener insert in either side connected in the center back by a cable/eyelet/grommet quick release system. The dimensions for all sizes are 7.25 inches tall, and from 55.375 inches long in extra small to 67.625 inches long in extra large. The maximum thickness of the cummerbund is .375 inches at the quick release. The ends are faced in Velcro, with a hook face inboard and a loop face outboard. The size of the Velcro facing ranges from 4 X 7 inches on the extra small to 6 X 7 inches on the extra large. Each side of the cummerbund opens on the top for the insertion of pockets containing the 6 X 8 inch side Enhanced Small Arms Protective Inserts and the similar sized soft armor insert.
- Record
- SN01470498-W 20071216/071214225040 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |