MODIFICATION
T -- New Bern
- Notice Date
- 8/8/2007
- Notice Type
- Modification
- NAICS
- 541370
— Surveying and Mapping (except Geophysical) Services
- Contracting Office
- General Services Administration, Public Buildings Service (PBS), Physical Capital Asset Management Division (PGE), 1800 F Street, NW, Room 4302, Washington, DC, 20405, UNITED STATES
- ZIP Code
- 20405
- Solicitation Number
- PR200707030021
- Response Due
- 9/4/2007
- Point of Contact
- Steve Cox, Contract Specialist, Phone 202-501-0543, Fax 202-208-1741, - Demetria Brown, contract specialist, Phone 202-208-3201, Fax 202-208-7413,
- E-Mail Address
-
steven.cox@gsa.gov, Demetria.Brown@gsa.gov
- Description
- FOR A COMPLETE COPY OF THE SOW IN WORD OR PDF FORMAT, PLEASE E-MAIL TO: STEVEN.COX@GSA.GOV PROJECT DESCRIPTION Project Name: New Bern Courthouse/Post Office/Customs House Renovation/Addition Building Type: Courthouse Approximate Area: 38,000 s.f. Year Built: 1700?s (~300 years ago) Location: New Bern, North Carolina Project Phase: The project is currently in Conceptual Design (CD). CD will last approximately through October, 2007, and Design Development (DD) and Construction Documents (CD) will last through November, 2008. Description: The U.S. Courthouse/Post Office/Customs House (Appendix A) is a historic structure located in New Bern, North Carolina. It is listed on the National Register of Historic Places. The building footprint is approximately 100 feet by 70 feet, and the total area is 38,000 SF. There are 3 stories (plus basement), with approximately 12 rooms per floor. OBJECTIVES ? To create an accurate current-condition record of the existing building conditions and assist in the repair and alteration work throughout its design process. The deliverables from the interior scanning will be used primarily for (1) the validation of existing ?as-built? data, and (2) the coordination of proposed building systems (under design) with the existing condition as validated by (1). The 3D imaging at this location will provide 2D CAD plans, elevations and 3D geometric models and/or BIM required to document as-built conditions, including details of the interior spaces. The elevations will assist architecture and engineering firms in developing their restoration and renovation designs. ? To generate a point cloud of the building interior and exterior for applications such as archival, visualization, and site planning. ? To assist GSA in developing 3D Imaging Best Practices that will be incorporated into GSA?s BIM Guide Series. It is the intention of the government to develop the Best Practices in a collaborative way so that current and future 3D imaging yields high quality deliverables in the most efficient manner. SCOPE OF SERVICES Imaging/Scan and Post Processing Plan Registered Raw Data The contractor shall submit registered raw data. Such raw data may include point cloud data, calibrated photographs, satellite images, etc. If 3D imaging technology is employed, the preferred format for this data is in ASCII: x, y, z, I, R, G, B (if intensity and color information are available). Other formats may be acceptable and are subject to approval by the GSA COTR. The registered point cloud data shall be reduced in size, to filter noise and redundant data to the maximum extent possible without compromising the accuracy and resolution of the model. 2D Drawings of Existing Conditions The contractor shall submit 2D representations of existing conditions (e.g., represent deformations and out-of-plumb conditions of artifacts that are subject to the artifact size definitions) of the areas scanned using the registered raw data. The government shall provide current drawings and specifications for each facility structure, if available, after GSA issues the Notice to Proceed. The 3D imaging information is expected to be used for verification and modification of existing 2D CAD drawings which will be provided by the GSA to the contractor. 3D/BIM Model of Existing Conditions The contractor shall model the existing condition of the facilities (e.g., represent deformations and out-of-plumb conditions of artifacts that are subject to the artifact size definitions) for the architectural, structural, mechanical, electrical, and plumbing components listed below using either a 3D model and/or a BIM model. Building Information Model of Proposed Design The contractor shall provide a BIM of the proposed design of the systems listed below. Contractor shall provide a BIM of the building interior and exterior based on Design Development documents and of the MEP system based on Engineering Design documentr and interior walls, roofs, ceilings, doors, windows, and stairs. Structural BIM The contractor shall provide a structural BIM that contains all major structural elements, including slabs, columns, and beams. Site 3D Model/BIM The contractor shall provide a 3D model and/or BIM of the surrounding landscape, buildings, and streetscape. 2.0 OPTION A 4D Model for Tenant Phasing of Phase III and Phase IV The contractor shall provide a series of 3D-based diagrams, model snapshots, and 4D models to support the communication of the proposed tenant relocation including, but not limited to, pre- and post-locations of tenants affected, location of construction work and staging areas. 3.0 OPTION B Space Object Modeling The model shall build upon the architectural BIM with the following spatial attributes: Space Number (ID), Space Name, GSA BIM Area, GSA Design Gross Area, Occupant Organization Name, and GSA STAR Space Type. Zone Object Modeling The contractor shall associate space objects in the BIM model with zonal information to assist GSA in visualization and analyses of spatial information. 4.0 OPTION C Energy Modeling The contractor shall perform and coordinate energy modeling services, and manage any efficiencies of data transfer afforded by ?object information? included in the BIM. The Contractor shall be familiar with and capable of conducting BIM-based energy simulation using an interoperable software application. 5.0 OPTION D GSA shall provide the contractor with the most recent set of 2D drawings (MEP and Civil) after GSA issues the Notice to Proceed, which will be Conceptual Design Phase drawings submitted by the A/E. Mechanical, Electrical, Plumbing, and Civil BIM The contractor shall provide mechanical, electrical, plumbing, and civil BIMs that model the major object types for these disciplines. Approximately 20 different object types will be modeled for the proposed design. BIM Coordination Services The contractor shall integrate and provide 3D geometry such that the model is compatible with clash detection software to enable design and construction coordination across architectural, structural, mechanical, electrical, plumbing, and/or civil disciplines, as project needs require. The contractor will inform GSA COTR of any conflicts after modeling the set of drawings issued by GSA COTR during the Design Development Phase. 6.0 OPTION E Modeling of Required Building Equipment Attributes (Performance Requirements) The contractor shall populate the building elements modeled in Option C with more extensive equipment information that captures the performance requirements specified by the design team. National CAD Standard The contractor shall coordinate with the GSA COTR to obtain the appropriate acronyms for the building equipment modeled in Option C. This information will be included in the list of attributes that is assigned to the required building elements. OmniClass The OmniClass Construction Classification System (known as OmniClass or OCCS) is a new classification system for the construction industry developed by the Construction Specification Institute (CSI). The contractor shall include the appropriate OmniClass classification in the list of attributes that is assigned to the required building elements. 7.0 OPTION F Modeling of Required Building Equipment Attributes (As-Builts) The contractor shall extend Option D activities to maintain the BIM with reliable and systematic updates for the required equipment attributes throughout the Construction Phase with the as-built equipment properties installed by the contractor. Performance Requirement/As-Built Evaluation The contractor shall produce periodic reports evaluating the as-builts? success in meeting GSA performance requirements for those elements. Construction Operations Building Information Exchange (COBIE) The Construction Operations Building Information Exchange (COBIE) is a buildingSMART initiative of the National Institute of Building Science?s (NIBS) Facility Maintenance and Operations Committee, the Facility Information Council, the International Alliance for Interoperability, and the National Building Information Model Standard. It is a federal government sponsored effort to support the development of BIM via information exchange between the construction and operations phases. The contractor shall coordinate the appropriate equipment information from the BIM with the COBIE system. Site Visit The government will coordinate one site visit prior to the actual on-site scanning. The site visit schedule will be promulgated at a later time. Pre-Bid Conference The CO, GSA COTR, and regional teams will hold a pre-bid teleconference on 8/23/07 at 1pm EST. Contractors bidding on any portion of this solicitation will have the opportunity to gain clarifications on that day by calling the conference number: 888-790-6578 and using the passcode: BIM NOTE: THIS NOTICE MAY HAVE POSTED ON FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (08-AUG-2007). IT ACTUALLY APPEARED OR REAPPEARED ON THE FEDBIZOPPS SYSTEM ON 20-SEP-2007, BUT REAPPEARED IN THE FTP FEED FOR THIS POSTING DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/GSA/PBS/PHA/PR200707030021/listing.html)
- Record
- SN01413373-F 20070922/070921081349 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |