Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF SEPTEMBER 22, 2007 FBO #2126
MODIFICATION

T -- PR200707030010 Birch Bayh

Notice Date
8/8/2007
 
Notice Type
Modification
 
NAICS
541370 — Surveying and Mapping (except Geophysical) Services
 
Contracting Office
General Services Administration, Public Buildings Service (PBS), Physical Capital Asset Management Division (PGE), 1800 F Street, NW, Room 4302, Washington, DC, 20405, UNITED STATES
 
ZIP Code
20405
 
Solicitation Number
PR200707030010
 
Response Due
9/4/2007
 
Point of Contact
Steve Cox, Contract Specialist, Phone 202-501-0543, Fax 202-208-1741, - Demetria Brown, contract specialist, Phone 202-208-3201, Fax 202-208-7413,
 
E-Mail Address
steven.cox@gsa.gov, Demetria.Brown@gsa.gov
 
Description
Birch Bayh Courthouse Scope of Work (SOW) for 3D-4D-BIM Services THE SITE VISIT WILL BE ON THURSDAY, AUGUST 16, 2007 AT 12:30PM LOCAL TIME. ATTENDEES CAN CONGREGATE AT THE MAIN ENTRANCE. POC IS CALVIN KAM, CELL: (202) 536-8150. l exterior and interior walls, roofs, ceilings, doors, windows, and stairs. Structural BIM The contractor shall provide a structural BIM that contains all major structural elements, including slabs, columns, and beams. Site 3D Model/BIM The contractor shall provide a 3D model and/or BIM of the surrounding landscape, buildings, and streetscape. 2.0 OPTION A 4D Model for Tenant Phasing of Phase III and Phase IV The contractor shall provide a series of 3D-based diagrams, model snapshots, and 4D models to support the communication of the proposed tenant relocation including, but not limited to, pre- and post-locations of tenants affected, location of construction work and staging areas. 3.0 OPTION B Space Object Modeling The model shall build upon the architectural BIM with the following spatial attributes: Space Number (ID), Space Name, GSA BIM Area, GSA Design Gross Area, Occupant Organization Name, and GSA STAR Space Type. Zone Object Modeling The contractor shall associate space objects in the BIM model with zonal information to assist GSA in visualization and analyses of spatial information. 4.0 OPTION C Energy Modeling The contractor shall perform and coordinate energy modeling services, and manage any efficiencies of data transfer afforded by ?object information? included in the BIM. The Contractor shall be familiar with and capable of conducting BIM-based energy simulation using an interoperable software application. 5.0 OPTION D GSA shall provide the contractor with the most recent set of 2D drawings (MEP and Civil) after GSA issues the Notice to Proceed, which will be Conceptual Design Phase drawings submitted by the A/E. Mechanical, Electrical, Plumbing, and Civil BIM The contractor shall provide mechanical, electrical, plumbing, and civil BIMs that model the major object types for these disciplines. Approximately 20 different object types will be modeled for the proposed design. BIM Coordination Services The contractor shall integrate and provide 3D geometry such that the model is compatible with clash detection software to enable design and construction coordination across architectural, structural, mechanical, electrical, plumbing, and/or civil disciplines, as project needs require. The contractor will inform GSA COTR of any conflicts after modeling the set of drawings issued by GSA COTR during the Design Development Phase. 6.0 OPTION E Modeling of Required Building Equipment Attributes (Performance Requirements) The contractor shall populate the building elements modeled in Option C with more extensive equipment information that captures the performance requirements specified by the design team. National CAD Standard The contractor shall coordinate with the GSA COTR to obtain the appropriate acronyms for the building equipment modeled in Option C. This information will be included in the list of attributes that is assigned to the required building elements. OmniClass The OmniClass Construction Classification System (known as OmniClass or OCCS) is a new classification system for the construction industry developed by the Construction Specification Institute (CSI). The contractor shall include the appropriate OmniClass classification in the list of attributes that is assigned to the required building elements. 7.0 OPTION F Modeling of Required Building Equipment Attributes (As-Builts) The contractor shall extend Option D activities to maintain the BIM with reliable and systematic updates for the required equipment attributes throughout the Construction Phase with the as-built equipment properties installed by the contractor. Performance Requirement/As-Built Evaluation The contractor shall produce periodic reports evaluating the as-builts? success in meeting GSA performance requirements for those elements. Construction Operations Building Information Exchange (COBIE) The Construction Operations Building Information Exchange (COBIE) is a buildingSMART initiative of the National Institute of Building Science?s (NIBS) Facility Maintenance and Operations Committee, the Facility Information Council, the International Alliance for Interoperability, and the National Building Information Model Standard. It is a federal government sponsored effort to support the development of BIM via information exchange between the construction and operations phases. The contractor shall coordinate the appropriate equipment information from the BIM with the COBIE system. Site Visit The government will coordinate one site visit prior to the actual on-site scanning. The site visit schedule will be promulgated at a later time. Pre-Bid Conference The CO, GSA COTR, and regional teams will hold a pre-bid teleconference on 8/23/07 at 1pm EST. Contractors bidding on any portion of this solicitation will have the opportunity to gain clarifications on that day by calling the conference number: 888-790-6578 and using the passcode: BIM NOTE: THIS NOTICE MAY HAVE POSTED ON FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (08-AUG-2007). IT ACTUALLY APPEARED OR REAPPEARED ON THE FEDBIZOPPS SYSTEM ON 20-SEP-2007, BUT REAPPEARED IN THE FTP FEED FOR THIS POSTING DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
 
Web Link
Link to FedBizOpps document.
(http://www.fbo.gov/spg/GSA/PBS/PHA/PR200707030010/listing.html)
 
Place of Performance
Address: INDIANAPOLIS, IN
Zip Code: 00000
Country: UNITED STATES
 
Record
SN01413364-F 20070922/070921081345 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.