SOURCES SOUGHT
49 -- Polyurea Spray System
- Notice Date
- 8/27/2007
- Notice Type
- Sources Sought
- NAICS
- 423830
— Industrial Machinery and Equipment Merchant Wholesalers
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, 96th Contracting Squadron (Eglin AFB), 96th Contracting Squadron 205 West D Ave., Suite 541, Eglin AFB, FL, 32542-6862, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- Reference-Number-F1T0CW7236AG01
- Response Due
- 8/30/2007
- Archive Date
- 10/1/2007
- Description
- (1) Each Polyurea Spray System which meet the below specifications: Equipment Requirements: High pressure hot polyurea spraying system; Equipment will be used to apply a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for metal, concrete, fiberglass and wood surfaces. Product Delivery Equipment: Glas Craft Super Maxi 2, 1 TO 1 Modified Plural Component Proportioner w/3000 PSI, 190 Degrees Heat, 6000 Watts Inlet and Pressure Side Filters Recirculating System Stroke Counter Automatic Hose Heat Control 12 Watts per/ft heating Stand (sprayed w/HP 1 to 1) RAM Repair Kits 2 Transfer Pumps w/repair kits (637378-C31) Probler Gun w/spare parts Kit 200 ft. heated spray hose that is repairable Drum Mixer Desiccant Filter Assembly Technical Manual Enclosure: The vendor shall include a truck enclosure system. The enclosure shall be 12 x 14 x 10. The vendor is free to contact POC for more information on technical requirements/specs. Product Requirements: Shore A Hardness 80-90. Elongation at break 330% Tensile Strength 2200 PSI Tear Strength 430 lb/in Must be solvent free VOC and CFC free Rapid curing Seamless High Build Tough and Elastomeric Chemical Resistance Low Temperature Flexibility Abrasiion and Impact Resistant 100% Solids Unlimited Color Options Chemical Product: 100 Gallon Kit; 50 Gallons (500 lbs net) Side-A and 50 gallons (454) lbs.net) Side-B. One kit will be supplied by the vendor at time of delivery of equipment. Equipment will be delivered to Eglin AFB and the vendor is required to set up equipment at facility and provide on-site training for three full days. An air compressor is on site and is capable of meeting CFM requirements to operate equipment. Tool Kit and Miscellaneous: Drum Wrench, Utility Knife w/Blades, Spray Bottle, Scrub Pads - 2(soft.), Teflon Tape, Lithium Grease 1 tube, Throat Seal Lube.
- Place of Performance
- Address: Eglin AFB, FL
- Zip Code: 32542
- Country: UNITED STATES
- Zip Code: 32542
- Record
- SN01386224-W 20070829/070827220908 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |