SPECIAL NOTICE
58 -- DIGITAL PULSE PROCESSOR
- Notice Date
- 8/2/2007
- Notice Type
- Special Notice
- NAICS
- 334511
— Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFFTC - AF Flight Test Center, 5 S WOLFE AVE, Edwards AFB, CA, 93524-1185, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- F1S0AX7121B001
- Response Due
- 8/16/2007
- Archive Date
- 9/30/2007
- Description
- NOTICE OF INTENT TO AWARD A SOLE SOURCE PROCUREMENT FOR 2 EACH DIGITAL PULSE PROCESSOR SYSTEMS. The proposed contract action is for 2 Digital Pulse Processing Systems for which 412 TW/PKEAD, Edwards AFB, CA intends to solicit and negotiate with only EDO Reconnaissance and Survellance Systems, Inc. under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within fifteen days after date of publication of this synopsis will be considered by the Air Force. A determination by the Air Force not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Air Force. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. ***************************************************************** SPECIFICATIONS: DIGITAL PULSE PROCESSOR The Digital Pulse Processing System provides the following basic signal processing functions: ? Preprocessing ? Pulse data acquisition ? Deinterleaving of pulse data ? Library matching ? Correlation and update of emitter status with previously received data ? Measurements of scan period/rate and type upon command ? Reporting emitter data and status ? Reporting pulse data for real-time displays ? Selects processing parameters such as bandwidth, threshold, CW definition and others ? Primary communications interface to/from the operator workstation The Signal Processing System has the following display types: ? System Set-up Displays ? Tabular Emitter Displays ? Graphical Emitter Displays ? Detailed Emitter Displays ? Real Time PDW Pulse Analysis Displays ? PDW Pulse Collection Displays ? Signal Intercept Report Recording and Playback Displays ? Library Editing Displays ? Built-in Test Displays ? RF/IF Displays ? DF Displays This system processor receives an RF input supplied by the user. Within the unit, the RF is converted to IF by a Microwave Tuner. The IF is digitized by a digital receiver which forms burst records of pre-detected data containing pulse information. Algorithms extract the pulse features from each pulse and store the data from each pulse in a Pulse Descriptor Word. The Pulse Processor Unit is a standard 5.25? high, 19? rack mount VME chassis containing a microwave tuner, a digital aperture VMW signal processor module and a system interface VME circuit card that provides for the system electrical interfaces. The digital signal processor module consists of a digital aperture PMC Module and an IF Conditioner PMC Module both mounted on a dual CPU Signal Board Computer. The Microwave Tuner requires 2 slots, the System Interface Board requires 1 slot and the Signal Processor Module requires 1 slot. Signal processing specifications relating to interpulse and intrapulse characteristics are presented in separate tables below. The performance requirements, unless otherwise stated, are for a 17 dB (minimum) input SNR signal. RF Input Performance Tuner Performance Frequency Coverage 0.5 to 18 GHz IF Outputs 1000 MHz and 160 MHz at same center frequency Detected Log Video 0.3 to 2 V over 60 dB dynamic range, min. Phase Noise < 1? RMS (100 Hz to 20 MHz) Integrated Phase Noise (RF Tuner only) < 1 deg. RMS for combined 1st, 2nd, 3rd LOs (Slow Tune) < 10 deg. RMS for combined 1st, 2nd, 3rd LOs (Fast Tune) (integrated over 100 Hz to 20 MHz from the carrier) Frequency Accuracy and Stability (RF Tuner only) Internal: ? 1 x 10e-6 External: Equal to Frequency Reference input (dependent on Frequency Reference utilized) Tuning Step Size 100 kHz Tuning Time < 300 ?sec for 500 MHz step External Reference Not required Accepts 5 or 10 MHz reference Performance at IF Center Frequency Center Frequency 1000 MHz 160 MHz Noise Figure 15 dB max 16 dB max Gain 8.5 ? 2.5 dB 11 ? 3 dB Bandwidth 500 MHz min. 70 MHz min. Passband Ripple < 3 dB p-p @ ? 200 MHz < 2 dB p-p @ ? 200 MHz Group Delay < 5 nsec @ ? 200 MHz < 5 nsec @ ? 20 MHz 1 dB Compression Point - 7 dBm min. - 10 dBm min Linear Dynamic Range > 91 dB @ 1 MHz BW > 90 dB @ 1 MHz BW 3rd Order Input Intercept -4 dBm min -5 dBm min 3rd Order Dynamic Range > 65 dB @ 1 MHz BW > 63 dB @ 1 MHz BW Image Rejection > 70 dB min > 70 dB min Internal Spurious < - 80 dBm < - 60 dBm Pulse Measurement Performance Parameter Description Measured Parameters Pulse Descriptor Word (PDW), consisting of: ? Radio Frequency (RF) ? Time-of-Arrival (TOA) (referenced to Time of Day) ? Pulse Width (PW) ? Amplitude (AMP) ? Flags ? Other parameters PDW-Appended Flags CW, PW Overflow, POP, FMOP, AMOP and PMOP flags Intrapulse Measurements ? POP detection ? FMOP range, minimum and maximum frequencies ? AMOP range, minimum and maximum amplitudes ? PMOP detection only (flag only) Modulation Type Description PULSED A signal that is above threshold for less than 256 ?sec FMOP A pulsed signal where the frequency variation within the pulse exceeds a programmable threshold in MHz AMOP A pulsed signal where the amplitude variation within the pulse exceeds a programmable threshold in dB PMOP A pulsed signal exhibiting bi- or quad phase modulation CW A signal that is determined to be present based on a statistical analysis of the input signal noise; and is not pulsed (no pulse threshold crossing) Parameter Description POP Performance Pulse-on-pulse (POP) condition detected when > 6 dB exists between 2 overlapping pulses, with > 50 nsec between the pulses? leading-edges. The POP threshold is settable over a 3 ? 20 dB range (6 dB is the default value.) FMOP Range 1 MHz to > 450 MHz FMOP Resolution < 200 kHz FMOP Accuracy 500 kHz RMS AMOP Range 6 ? 30 dB AMOP Resolution 0.3 dB AMOP Accuracy ? 1 dB PMOP Modulation Types BPSK, QPSK (PMOP flag only) PMOP Modulation Range 100 kHz ? 20 MHz (PMOP flag only) Signal Processing Performance Characteristics The Signal Processing System automatically measures and reports pulse train characteristics as shown below: Parameter Specification Signal Types Processed Pulse, CW, Pulse Doppler, PRI Agile, Frequency Agile Emitter Identification Based on RF, PRI, PRI type and modulation, PW, and Scan period Instantaneous Bandwidth 500 MHz 250, 125 or 50 MHz, selectable Processor linear dynamic range 60 dB Pulse Rate, Burst 1,000,000 PPS minimum RF Resolution 10 kHz nominal RF Accuracy 125 kHz RMS TOA Resolution <0.5 nsec TOA Accuracy 1 nsec RMS PW Range 50 nsec ? 128 ?sec PW Resolution 1.5 nsec PW Accuracy ? 2 nsec AMP Range (Reported) 0 ? 70 dB AMP Resolution 0.3 dB AMP Accuracy ? 1 dB PRI Range 2 ?sec ? 10 msec PRI Resolution 1 nsec PRI Accuracy 1 nsec RMS PRI Modulations Stagger, jittered, constant, pulse groups, switched, complex PRI Stagger Positions 32 positions, maximum Stagger above 32 positions will be reported as Jitter PRI Jitter Range 1 ? 15% of the mean PRI, minimum CW Determination Non-pulse width based (statistical based process) PW Overflow Flag Definition Range 32 ? 128 ?sec Scan Types Circular, Sector, Conical, Steady Scan Rate Range 0.05 to 100 Hz Scan Rate Accuracy 2% RMS Active Emitter File Capacity 1024 Emitters (before rollover) Library Type File Capacity 10,000 Modes Data Recording Parameter Specification Parameter Specification Collected Data Types ? Emitter Activity Log ? Pulse Data (PDWs) Data Storage Medium Provided on Operator Workstation (User-Furnished) PDW Data Recording Rate Up to 1 MPPS burst for up to 32,000 pulses Emitter Activity Log Capacity limited by available drive space PDW Collect Modes Snapshot and Continuous PDW Storage 32,000 pulses maximum in Snapshot mode Capacity limited by available drive space in Continuous Mode Physical Data Requirements Dimensions 5.25 in. x 19 in. x 24 in. Weight 65 lb. Power Requirements 200 W nominal @ 110 VAC or 220 VAC Environmental Data Requirement Range Requirement Range Operating Temperature 0 to 50? C Storage Temperature -20 to 70? C Humidity 0-95% non-condensing ***************************************************************** Please note that this is not a request for competitive proposals. However, all interested parties who believe they can meet the requirements are invited to submit in writing complete information detailing their ability to provide the 2 Digital Pulse Processor Systems. Responses may be sent via e-mail to Ashleigh.baird@edwards.af.mil or mailed to 412 TW/PKEAD, 5 South Wolfe Ave, Edwards AFB, CA 93524-1185, Attention: Ashleigh Baird. Fax Number: 661-277-0470. If the office has not received any affirmative written responses by 4:00 p.m. PST, 16 August 07, a Sole Source purchase order will be pursued with EDO Reconnaissance and Survellance Systems, Inc., 18705 Madrone Parkway, Morgan Hill, CA 95037.
- Place of Performance
- Address: 5 South Wolfe Avenue, Edwards AFB, CA,
- Zip Code: 93524
- Country: UNITED STATES
- Zip Code: 93524
- Record
- SN01360225-W 20070804/070802221141 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |