MODIFICATION
66 -- Infrared Camera
- Notice Date
- 7/11/2007
- Notice Type
- Modification
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, MD, 20899-1640, UNITED STATES
- ZIP Code
- 20899-1640
- Solicitation Number
- SB1341-07-RQ-0222
- Response Due
- 6/13/2007
- Point of Contact
- Andrew Perry, Purchasing Agent, Phone (301) 975-6317, Fax (301) 975-8884, - Joan Smith, Contract Specialist, Phone (301)975-6458, Fax (301)975-8884,
- E-Mail Address
-
andrew.perry@nist.gov, Joan.Smith@nist.gov
- Description
- The above referenced solicitation is hereby amended to incorporate technical changes to the specifications for Line Item 0001. The following technical changes are hereby incorporated: Specifications for Line Item 0001: From: 1. Measurement Temperature Range must be 50-250 degrees Celsius; 2. Operating Temperature must be up to 50 degrees Celsius; 3. Accuracy must be plus or minus 2 percent; 4. Spatial resolution must be less than or equal to 2.7 mrad; 5. Spot Size with Lens must be less than 0.75 mm at a focal distance of 4 inches; 6. Spectral Range must be 7.5 to 13 micro meters; 7. Output must be Plug and Play, IEEE-1394, BNC-C-Video; 8. Control must be PC Controllable from an RS-232 interface; 9. Image Resolution must be 320x240; 10. Must be LabView compatible; 11. Must have Integrated Keyboard; 12. Output image must give absolute temperature values without the need for further Calibration; 13. Must have 1 year standard warranty plus 1 year extended warranty. To: 1. Measurement Temperature Range must be at least from 50-240 degrees Celsius; 2. Operating Temperature must be up to 50 degrees Celsius; 3. Accuracy must be lest than or equal to plus or minus 3 percent; 4. Spatial resolution must be less than or equal to 3 mrad; 5. Spot Size with appropriate lens must be less than 0.75 mm at a focal distance of 4 inches; 6. Spectral Range must be 7 to 13 micro meters; 7. Output must be IEEE-1394 and BNC-C-Video; 8. Image Resolution must be 320x240; 9. Must interface with LabView; 10. Output digital image must provide temperature values at each pixel; 11. Must weigh less than 1.2 kg; 12. Must have 1 year standard warranty plus 1 year extended warranty. The due date for quotations is hereby extended to July 17, 2007 @ 3:30 PM local time. NOTE: THIS NOTICE MAY HAVE POSTED ON FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (11-JUL-2007). IT ACTUALLY APPEARED OR REAPPEARED ON THE FEDBIZOPPS SYSTEM ON 17-JUL-2007, BUT REAPPEARED IN THE FTP FEED FOR THIS POSTING DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-07-RQ-0222/listing.html)
- Place of Performance
- Address: 100 BUREAU DRIVE GAITHERSBURG, MD
- Zip Code: 20899
- Country: UNITED STATES
- Record
- SN01344933-F 20070719/070717223744 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |