SOLICITATION NOTICE
66 -- Axis Controller
- Notice Date
- 7/17/2007
- Notice Type
- Solicitation Notice
- NAICS
- 423610
— Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, MD, 20899-1640, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- Reference-Number-NB852080-7-05496
- Response Due
- 8/1/2007
- Archive Date
- 8/16/2007
- Description
- The National Institute of Standards and Technology (NIST) intends to negotiate, on a sole source basis, under authority of FAR 13.106-1(b) (1), with Faber Associates, Incorporated, of Clifton, New Jersey, for the acquisition of an Axis Controller to be used at NISTs Brookhaven National Laboratory in Upton, New York. *** NIST cites FAR 6.302-1(a)(ii)(A) and (B) (see excerpt below) as primary rationale for Sole Source Determination. (ii) Supplies may be deemed to be available only from the original source in the case of a follow-on contract for the continued development or production of a major system or highly specialized equipment, including major components thereof, when it is likely that award to any other source would result in -- (A) Substantial duplication of cost to the Government that is not expected to be recovered through competition, or (B) Unacceptable delays in fulfilling the agency?s requirements. (See 10 U.S.C. 2304(d)(1)(B) or 41 U.S.C. 253 (d)(1)(B).) *****Sole source determination is based on the need for compatibility and interchangeability with existing equipment currently in the laboratory. The required axis controller will be used at a remote site in 24/7 operation located at the Brookhaven National Laboratory. Rapid interchangeability with existing equipment is critical in order to maintain a high level up time. Faber Parker Compumotor components are currently used in existing NIST x-ray materials characterization beamlines and are compatible with existing custom made software and hardware which has been designed to work with these Faber Parker Compumotor components. Faber Associates, Incorporated, is the only known vendor capable of supplying the required axis controller. ***Delivery shall be FOB DESTINATION and be completed in accordance with the Contractor?s commercial schedule. *** *** As defined in the Federal Acquisition Regulation, (FAR), FOB Destination means: The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. The contractor shall deliver all line items to NIST, Gaithersburg, Maryland, 20899-0001. *** *****The North American Industry Classification System (NAICS) code for this acquisition is 423610, and the size standard is 500 Employees. ******A determination by the Government not to compete the proposed acquisition based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. *****No solicitation package will be issued. This notice of intent is not a request for competitive quotations. However, responses received by August 1, 2007 will be considered by the Government.
- Place of Performance
- Address: 100 Bureau Drive, Shipping & Receiving, Building 301, Gaithersburg, Maryland
- Zip Code: 20899-0001
- Country: UNITED STATES
- Zip Code: 20899-0001
- Record
- SN01343981-W 20070719/070717220333 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |