SOURCES SOUGHT
95 -- Fabrication of coinage strip
- Notice Date
- 6/6/2007
- Notice Type
- Sources Sought
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- Department of the Treasury, United States Mint (USM), ATTN: Manufacturing Procurement, 801 Ninth Street, NW 7th Floor North, Washington, DC, 20220, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- TM-HQ-07-0037
- Response Due
- 6/15/2007
- Archive Date
- 6/30/2007
- Description
- Program Description: The United States Mint has a requirement for coils of metal strip to be used as raw material for producing coins in the following denominations (5?, 10?, 25?, 50? and $1) for the United States Mint. The raw material acquired must produce coins that are compatible with existing coinage in circulation within the vending, banking, commerce as well as the general public. The raw material breaks down into three separate alloys, one homogeneous and two 3-ply clad manufacturing processes. The five-cent (Cupro-Nickel) alloy is a homogeneous alloy composed of 75% Copper (Cu) and 25% nickel (Ni). The 10, 25 and 50 cent coins are made from a 3-ply composition (Cupro-Nickel-Clad), comprised of two exterior layers of 75% Cu - 25% Ni with a pure copper core. The $1 alloy (Nickel-Manganese-Brass) is a 3-ply composition, with the two exterior layers composed of Cu, Ni, Zinc (Zn) and Manganese (Mn) with a pure copper core. Each of the 3-ply alloy compositions must be metallurgically bonded to ensure there is no possibility of separation within the layers. The Cupro-Nickel-Clad alloy and process was developed to replace previous coins, made from coining silver, and designed to function seamlessly in the vending industry. The Golden dollar alloy was developed to replace and function in the vending industry as the Susan B. Anthony dollar coin. General specifications for United States Mint coinage strip: Thickness: 0.041 in. - 0.0685 in. Width: 12 9/16? - 13 ?? Coil size: 4,000 - 10,000 pounds, (nominal >7,000 pounds) Estimated volume requirements: Denomination Annual Volume Pounds Weekly Volume Pounds 5-cent 40% 8,000,000 160,000 60% 12,500,000 250,000 10,25,50-cent 40% 25,000,000 500,000 60% 37,000,000 750,000 $1 Golden 40% 8,000,000 160,000 60% 12,000,000 240,000 In addition, the Mint generates approximately 25% of the above volume as scrap. The contractor must be able to recycle and use returned scrap from the coining process as feed stock for future coinage strip. This is a contract for goods or services necessary for carrying out the programs or operations of the United States Mint. Provisions of law governing procurement or public contracts shall not be applicable to the procurement of goods or services necessary for carrying out United States Mint programs and operations. See 31 U.S.C. ? 5136. You will not receive responses to questions or comments.
- Place of Performance
- Address: At Contractors facility
- Zip Code: 10196
- Country: UNITED STATES
- Zip Code: 10196
- Record
- SN01311934-W 20070608/070607035701 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |