SOLICITATION NOTICE
J -- USCGC SANIBEL (WPB-1312)
- Notice Date
- 3/8/2007
- Notice Type
- Solicitation Notice
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street Suite 600, Norfolk, VA, 23510-9102, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- HSCG80-07-Q-3FAD90
- Response Due
- 3/15/2007
- Archive Date
- 3/8/2008
- Small Business Set-Aside
- Total HUB-Zone
- Description
- The United States Coast Guard Maintenance & Logistics Command, Atlantic intends to issue a Commercial Request for Quote (RFQ) for Dry Dock and repairs to the USCGC SANIBEL (WPB-1312). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The acquisition will be solicited HubZone Set-Aside. The simplified acquisition will be issued as a Best Value, Request for Quote (RFQ) on or about March 30, 2007. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPS) web page at www.eps.gov. Hard copies of the specification and solicitation will not be issued. A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all request via e-mail to Arlene.V.Woodley@uscg.mil. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. FEDBIZOPS also contains an option automatic notification service. The standard industrial classification code is 3732 and the NAICS is 336611. The home port of the vessel is Woods Hole, MA. All work will be performed at the contractor?s facility. The performance period will be 45 calendar days with a start date on or about July 2, 2007. The scope of the acquisition is for 1)Welding Repairs; 2)Routine Drydocking; 3)Provide Temporary Logistics; 4)Clean and Inspect Fuel and Oil Tanks (includes disposal); 5)Preserve Oil Tanks; 6)Renew Piping and Clean Sewage and Grey Water Piping System; 7)Clean Sewage and Grey Water Collection and Holding Tanks; 8)Preserve Sewage and Grey Water Collection and Holding Tanks; 9)Renew Valves; 10)Clean and Inspect Heat Exchangers; 11)Inspect MDE Exhaust System; 12)Overhaul Stabilizing Fins; 13)Remove, Inspect, and Reinstall Propellers; 14)Repair Propeller Root Erosion; 15)Remove, Inspect, and Reinstall Propeller Shafts; 16)Overhaul Mechanical Shaft Seal Assemblies; 17)Renew Water Lubricated Propeller Shaft Bearings; 18)Inspect Bronze Sleeves in Various Areas; 19)Remove, Inspect, and Reinstall Rudder Assemblies; 20)Inspect and Maintain Cathodic Protection System; 21)Preserve Transducer Hull Ring; 22)Preserve Underwater Body; 23)Renew Aft Steering Hatch; 24)Install Gooseneck Vent (EC No. 110-C-099); 25)Install Stern Flap (EC No. 110-C-087); 26)Install New Flush-mounted Hatch Drains and Forward Peak Hatch (EC-110-C-119); 27)Preserve and Insulate Aft Steering Compartment; 28)Renew Through-Deck Packing Glands; 29)Install New Pre-lube Pump Controls (EC 110-B-121). Trained welders who have been certified by the applicable regulatory code performance qualification procedures shall accomplish all welding and brazing. There are no geographic restrictions. For further information or questions regarding this solicitation, please contact Arlene Woodley at (757) 628-4645, or by e-mail at Arlene.V.Woodley@uscg.mil.
- Record
- SN01246502-W 20070310/070308220505 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |