SOLICITATION NOTICE
31 -- BEARING,SLEEVE
- Notice Date
- 2/14/2007
- Notice Type
- Solicitation Notice
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; 84 CSUG/PK;6050 GUM LANE BLDG 1215; HILL AIR FORCE BASE; UT; 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8203-07-Q-70956
- Response Due
- 3/16/2007
- Archive Date
- 8/1/2007
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20200770956 Item: 0001 NSN: 3120012541410LELE BEARING,SLEEVE P/N: 06-0311-72-106E-007, P/N: 06-311-72-106E-007, P/N: AD72-307, P/N: KDJ72-11, Description: BEARING,SLEEVE|3.3310 INCHES MINIMUM AND 3.3410 INCHES MAXIMUM|5.2170 INCHES MINIMUM AND 5.2200 INCHES MAXIMUM|4.8840 INCHES MINIMUM AND 4.8870 INCHES MAXIMUM|4.5180 INCHES MINIMUM AND 4.5200 INCHES MAXIMUM|2.7710 INCHES NOMINAL|SQUARE ALL CORNERS|32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY|63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY|TWO KEYS ON LEFT END; TWO RADIAL GROOVES ON OD; INTERNAL FLANGE ID COUNTERBORED TO 4.927 IN. AT RIGHT END|ALUMINUM ALLOY 7075 OVERALL|QQ-A-225/9 FED SPEC SINGLE MATE Total Line Item Qty: 57.0000 ea Applicable to: F-15 Destn: SW3215,BARSTOW,CA.,92311-5014. Delivery: 30SEP2008, 109.00 ea The anticipated award date will be:16MAR2007 Electronic procedure will be used for this solicitation. To: RBC TRANSPORT DYNAMICS CORP, SANTA ANA, CA.,92704-5811. To: NEW HAMPSHIRE BALL BEARINGS, INC, PETERBOROUGH, NH.,03458-1709. To: SARGENT CONTROLS & AEROSPACE, TUCSON, AZ.,85743-9453. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in this solicitation. Sources must be qualified prior to being considered for award. The solicitation will contain instructions of obtaining further information on this requirement. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. See Note(s) 26.
- Record
- SN01232076-W 20070216/070214220616 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |