SOURCES SOUGHT
14 -- Product Qualification for Solid State Quartz Rate Sensors
- Notice Date
- 8/14/2006
- Notice Type
- Sources Sought
- Contracting Office
- N68936 Naval Air Warfare Center Weapons Division Dept.2 429 E. Bowen Rd - Stop 4015 China Lake, CA
- ZIP Code
- 00000
- Solicitation Number
- N6893606R0035
- Response Due
- 9/13/2006
- Archive Date
- 11/13/2006
- Description
- THIS SPECIAL NOTICE IS NOT A REQUEST FOR PROPOSAL. It is a product qualification opportunity. The Naval Air Warfare Center Weapons Division, China Lake, CA intends to procure Solid State Quartz Rate Sensors as a component of a telemetry system for the Sidewinder Missile project in approximately summer 2007. Product must be qualified before contract award. A minimum of 100 units will be ordered and a maximum of 750 units may be ordered over the five-year period of performance. The rate sensors must meet the required form, fit, and function requirements of drawing 639AS9453 Revision C for a pre-existing missile telemetry fabrication package. The required dimensions of the missile design for rate sensors are 1.625 inches maximum diameter and 0.640 inch maximum thickness. The following additional characteristics are provided: Electrical Input Voltage: ? 5 Vdc; or ?5%, Input Power: <0.8 watts, Full Scale Output: ? 2.5 Vdc, Performance Range: ? 500 degrees per second, Bandwidth: > 80 Hz, Environmental Operating Temperature: -40 to +70?C, Environmental Storage Temperature: -55 to +110?C. To qualify a product under drawing 639AS9453C, the contractor shall, at their own expense, perform all qualification tests required and submit four (4) units that meet all the requirements of drawing 639AS9453C; and submit all test data for the qualification units to the procuring activity for evaluation. The contractor must also furnish any additional information requested by the procuring activity. The qualification units shall be manufactured using the same methods, materials, parts, processes, equipment, and procedures proposed for production. Each qualification unit shall meet all specified requirements. Failure of any qualification unit to meet any of the requirements shall be cause for rejection. The contractor will be notified approximately 30 days after the submission of the product and test data, whether the product passed or failed the qualification testing. For a copy of drawing 639AS9453C, send a written request to Kim Matsunaga, Contract Specialist, by electronic mail to Kim.Matsunaga@navy.mil, or by fax at 760-939-8329. For technical questions, please contact Deane Campbell by electronic mail to Deane.Campbell@navy.mil or by phone at 760-939-6871. NAICS Code = 334413 Place of Performance = N/A Set Aside = N/A
- Record
- SN01114684-W 20060816/060814221310 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |