SOLICITATION NOTICE
48 -- valve linear, direct
- Notice Date
- 6/13/2006
- Notice Type
- Solicitation Notice
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- Defense Logistics Agency, Logistics Operations, Defense Supply Center Columbus, P O Box 3990, Columbus, OH, 43218-3990
- ZIP Code
- 43218-3990
- Solicitation Number
- spm7m206r0078
- Response Due
- 7/31/2006
- Archive Date
- 8/15/2006
- Small Business Set-Aside
- Total Small Business
- Description
- NSN 4810 00 205 4132 QUANTITY: 53 UNIT OF ISSUE:EA DESTINATION INFORMATION:NEW CUMBERLAND PA 17070 DELIVERY SCHEDULE:180 DAYS All responsible sources may submit and offer/quote which shall be considered. Note 26 applies. The solicitation will be in FedBizOpps on its issue date of 30 June 2006. Proposed procurement contains a 100% option for increased quantities. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. Notice to All Contractors:In a final rule contained in the Federal Acquisition Circular 01 26 (Item I, FAR Case 2002 24) published in the Federal Register on December 20, 2004, the Federal Acquisition Regulation was amended to require offerors to submit representations and certifications electronically via the Business Partner Network. Offerors are encouraged to complete an Online Representations and Certifications Application (ORCA) as soon as possible. The ORCA can be found at http://orca.bpn.gov. VALVE, LINEAR, DIRECTIONAL CONTROL I.A.W. NAVY (80064) DWG 2589011 EXCEPTION DATA: DWG 2589001 CORRECT P/N IS AV 168971 MATERIALS 6061-T6 AND 6061-T6511 ARE ACCEPTABLE. DWGS 2587293, 2587984, 2587985, 2589028, AND 6227438 ARE NOT REQUIRED FOR THIS ITEM. CASTINGS TO A- 356T6 PER ASTM B26 FOR 2587694 ARE ACCEPTABLE. MATERIAL PER ASTM A 401/401M I/L/O QQ-W-412 IS ACCEPTABLE. 2589011 NOTE 2.F. TO READ .6 AMP IN LIEU OF .4 AND Q2589011 SHEET 3, TEST PROCEDURE 7 TO READ .6 AMP IN LIEU OF .4 AMP. Q2589011- SHEET 4 CHANGES:POSITIVE TERMINATION OF SOLENOID "1ST" FROM TOP OF AMMETER TO BOTTOM OF AMMETER. 2587694:MARKING WITH METAL STAMP USING ROUND EDGES IS ACCEPTABLE "CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS." DRAWING CITED IS SUBJECT TO EXPORT-CONTROL REGULATIONS AND DISTRIBUTION IS LIMITED TO THOSE CONTRACTORS QUALIFIED THROUGH JCP CERTIFICATION. TO APPLY FOR CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT." FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:. UNITED STATES/CANADA JOINT CERTIFICATION OFFICE DEFENSE LOGISITICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE, NORTH BATTLE CREEK, MI 49017-3084. CONTRACTS WILL BE AWARDED ONLY TO THOSE CONTRACTORS WITH JCP CERTIFICATION ISSUED PRIOR TO AN AWARD. "THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST CONFORM TO SOURCE CONTROL DRAWING. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE SOURCE CONTROLLED COMPONENTS FROM SOURCES APPROVED ON THE APPLICABLE SOURCE CONTROL DRAWING." IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE, HOWEVER, THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO; I.E., THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). DLAD CLAUSE 52.246-9004, PRODUCT VERIFICATION TESTING, IS HEREBY INCORPORATED, AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES FULL AND OPEN COMPETITION APPLY DRAWINGS ARE SUBJECT TO EXPORT-CONTROL REGULATIONS, AND DISTRIBUTION IS LIMITED TO THOSE CONTRACTORS WITH JCP CERTIFICATION. CERTIFICATION IS MAINTAINED AT THE DEFENSE LOGTISTICS INFORMATION SERVICE (DLIS) IN BATTLE CREEK, MI. "DETAILED DRAWING (ONE ITEM)" "SPECIFICATION CONTROL" PARTS LIST QUALITY ASSURANCE PROVISION QUALITY REQUEST/REQUIREMENTS, QUALITY ASSURANCE REQUIREMENTS (QAR)
- Record
- SN01068280-W 20060615/060613220120 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |