Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF MARCH 24, 2006 FBO #1579
SOLICITATION NOTICE

28 -- HUB,COMPRESSOR,AIRC

Notice Date
3/22/2006
 
Notice Type
Solicitation Notice
 
Contracting Office
DEPARTMENT OF THE AIR FORCE; 3001 STAFF DR STE 2AG1 109B; TINKER AFB; OK; 73145
 
ZIP Code
73145
 
Solicitation Number
FA8104-06-R-0314
 
Response Due
5/8/2006
 
Archive Date
8/6/2006
 
Small Business Set-Aside
N/A
 
Description
PR Number(s): Item: 0001 NSN: 2840011606505RVRV HUB,COMPRESSOR,AIRC P/N: 698998, Description: DIMENSIONS: THE HUB COMPRESSOR IS 18.804 INCHES IN DIAMETER ON THE FORWARD END AND 5.495-5.500 INCHES IN DIAMETER ON THE AFT END. MATERIAL: AMS 5660-NICKEL ALLOY. ITEM DESCRIPTION: THE HUB COMPRESSOR IS CIRCULAR IN DESIGN WITH A BEARING JOURNAL (SHAFT) ON THE AFT END. FUNCTION: THIS ITEM PROVIDES A MOUNTING POINT THAT HOLDS THE BEARINGS AND SUPPORTS THE COMPRESSOR. Total Line Item Qty: 6.0000 HUB COMPRESSOR AIRC NSN: 2840-01-160-6505RV, P/N: 698998, DIMENSIONS: THE HUB COMPRESSOR IS 18.804 INCHES IN DIAMETER ON THE FORWARD END AND 5.495-5.500 INCHES IN DIAMETER ON THE AFT END. MATERIAL: AMS 5660-NICHEL ALLOY. ITEM DESCRIPTION: THE HUB COMPRESSOR IS CIRCULAR IN DESIGN WITH A BEARING JOURNAL (SHAFT) ON THE AFT END. FUNCTION: THIS ITEM PROVIDES A MOUNTING POINT THAT HOLDS THE BEARING AND SUPPORTS THE COMPRESSOR. DELIVERY: BY 29 FEB 2008. QUANTITY: 06 EA. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302.? Interested persons may identify their interest and capability to respond to the requirement or submit proposals.?This notice of intent is not a request for competitive proposals.? However, all?proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government.? Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Qualification requirements: It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. The solicitation will contain instructions for obtaining further information on becoming qualified. The requirements of FAR 9.202(a)(1) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. Qualified sources are: PRATT & WHITNEY. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, or manufacturers that have successfully completed all testing on items determined by the government to be similar in complexity and criticality can be considered approved sources for this item. All responsible sources may submit a bid. Award will be made only if the offeror, the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405)736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: faxed solicitation request can be submitted to OC_ALC/PKP, Tinker AFB OK 73145-3015, FAX NUMBER (405) 734-1627, Request for Written Quotation will be issued. POINT OF CONTACT: Annelda Dade, Contract Negotiator, E-mail Annelda.dade@tinker.af.mil, Phone (405) 734-1523. Note: The solicitation will be posted on the FedBiz Ops on or about 21 APR 2006. See note(s) 22, 23 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 29FEB2008, 6.00 Electronic procedure will be used for this solicitation. To: UNITED TECHNOLOGIES CORP., PRATT &, EAST HARTFORD, CT.,06108-0968.
 
Record
SN01012362-W 20060324/060322212413 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.