SOURCES SOUGHT
61 -- AE Electrical Power Source
- Notice Date
- 1/18/2006
- Notice Type
- Sources Sought
- NAICS
- 335311
— Power, Distribution, and Specialty Transformer Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, HQ HSG - Human Systems Group, HQ HSG/YASK 7980 Lindbergh Landing, Brooks City-Base, TX, 78235-5119
- ZIP Code
- 78235-5119
- Solicitation Number
- RFIAEPowerSource
- Response Due
- 2/1/2006
- Archive Date
- 2/16/2006
- Description
- SUBJECT: Aeromedical Evacuation Electrical Power Source The Human Systems Group is seeking information from sources that are capable of providing an Aeromedical Evacuation (AE) Electrical Power Source to eliminate dependence on aircraft power. The electrical power source must be able to be used within the aeromedical evacuation system. The electrical power source should have as a minimum the following capabilities: 1. The volume of the electrical power source must enable the device to fit on the Air Force?s Patient Support Pallet with the patients. Free space is at a premium. 2. The product?s overall weight should be minimized. Responders should specify whether their device provides power to each individual patient or serves multiple patients simultaneously. 3. The electrical power source should provide 7.5 amps of electricity per patient for the duration of a 12 hour mission. AE medical equipment typically operates on 12 VDC; however some equipment uses 120 VAC only, so the power source should be capable of delivering both AC and DC. Responders should specify whether the devices require refueling/recharging/replacing to achieve the above requirements. Electrical power within the product should be renewable either by the addition of new fuel or by recharging. 4. The electrical power source will operate in an atmosphere where there may be jet fuel vapor present. The product must not spark for any reason and must not use high volumes of potentially explosive fuel. It must not produce noxious exhaust products. 5. The electrical power source will operate in aircraft at altitude. During an in-flight rapid decompression the expansion in air volume will not diminish the electrical generation capacity of the product. The product will be tested by the USAF in a high altitude chamber to 15,000 feet above sea level. The product will be subjected to a rapid decompression to 45,000 feet above sea level. (See URL: http://www.tdsway.com/products/recon/hardware_test_standards/MIL-STD-810F_500.4 ) 6. The product will withstand exposure to humidity levels from 5% to 95%. 7. The product shall recover after being subjected to high temperature storage IAW MIL-STD-810F, Method 501.4. (See URL: http://www.tdsway.com/products/recon/hardware_test_standards/MIL-STD-810F_501.4 ) 8. The product shall recover after being subjected to low temperature storage IAW MIL-STD-810F, Method 502.4. (See URL: http://www.tdsway.com/products/recon/hardware_test_standards/MIL-STD-810F_502.4 ) 9. The product shall meet all applicable OSHA standards for safety and EPA standards for disposal. This synopsis is for information and planning purposes only and is not to be construed as a commitment by the government. This is NOT a Request for Proposal, Invitation for Bid, or an announcement of a solicitation. Response to this RFI is strictly voluntary and will not affect any corporation's ability to submit an offer if a solicitation is released. There is no bid package or solicitation document associated with this announcement. The purpose of this document is to identify potential sources. Any requests for a solicitation package will be disregarded. For submissions to be considered developers/sponsors must electronically supply (.doc or .pdf format) the preceding information in the order and format in which it is presented to William Keihl, Contracting Officer, William.keihl@brooks.af.mil no later than 1700 hrs, February 16, 2006. Telephonic responses will not be accepted. Electronic Media can be mailed to Human Systems Group/PSP, 7980 Lindbergh Landing, Brooks City-Base TX 78235-5119, ATTN: Lt. Susan Levy. The Government does not intend to award a contract on the basis of this RFI or otherwise pay for the information solicited. No entitlement to payment of direct or indirect costs or charges by the Government will arise as a result of preparing submissions in response to this RFI and the Government's use of such information. Submittals will not be returned to the sender. Respondents of this RFI may be requested to provide additional information/details based on their initial submittals. The Government recognizes that proprietary data may be part of this effort. If so, clearly mark such restricted or proprietary data and present it as an addendum to the non-restricted/non-proprietary information. The Government shall not be liable for or suffer any consequential damages for any improperly identified proprietary information. Proprietary information will be safeguarded in accordance with the applicable Government regulations. The Government reserves the right to select one, some, or none of the submissions for further investigation. Submissions shall not exceed ten (10) 8.5 X 11 inch, single-sided pages per product. Product MSDS, independent technical reports, and laboratory reports may be attached in an appendix and will not count against the length requirement. Vendors who submit packages for review do so with the understanding that U.S. Government personnel as well as their support contractors will review their material and data. Respondents will not be contacted regarding their submission or information gathered as a result of this notice nor the outcome of the Government's review of the solicited information.
- Place of Performance
- Address: Human Systems Group/PSP, 7980 Lindbergh Landing, Brooks City-Base TX
- Zip Code: 78235-5119
- Country: USA
- Zip Code: 78235-5119
- Record
- SN00968132-W 20060120/060118212152 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |