MODIFICATION
53 -- Abrasive, grain; IAW NSN IPD
- Notice Date
- 11/14/2005
- Notice Type
- Modification
- NAICS
- 327910
— Abrasive Product Manufacturing
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), Southwest Supply Center (7FL), 819 Taylor Street RM 6A06, Fort Worth, TX, 76102
- ZIP Code
- 76102
- Solicitation Number
- 7FLC1-Y8-06-6708-SQ
- Response Due
- 11/18/2005
- Archive Date
- 11/22/2005
- Description
- Modification to the Delivery terms - Quote is open to FOB Origin and FOB destination. FOB Origin terms are Freight prepaid and invoice shipping costs. Clause 52.247-32, F.O.B. ORIGIN, FREIGHT PREPAID (JUN 1988) 47.303-4 is added to RFQ. If you are offering FOB destination, you must breakout the item cost and the shipping costs separately on your quotation. Closing Date is extended to November 21, 2005 by Close of Business Central Time. Request for Proposal, for Standing Quote Agreement (SQ); download and complete entire RFQ, mail original signature document. 52.247-32 F.O.B. ORIGIN, FREIGHT PREPAID (JUN 1988) 47.303-4 (a) The term "f.o.b. origin, freight prepaid," as used in this clause, means-- (1) Free of expense to the Government delivered-- (i) On board the indicated type of conveyance of the carrier (or of the Government, if specified) at a designated point in the city, county, and State from which the shipments will be made and from which line-haul transportation service (as distinguished from switching, local drayage, or other terminal service) will begin; (ii) To, and placed on, the carrier's wharf (at ship-side, within reach of the ship's loading tackle, when the shipping point is within a port area having water transportation service) or the carrier's freight station; (iii) To a U.S. Postal Service facility; or (iv) If stated in the solicitation, to any Government-designated point located within the same city or commercial zone as the f.o.b. origin point specified in the contract (commercial zones are prescribed by the Interstate Commerce Commission at 49 CFR 1048); and (2) The cost of transportation, ultimately the Government's obligation, is prepaid by the Contractor to the point specified in the contract. (b) The Contractor shall-- (1) (i) Pack and mark the shipment to comply with contract specifications; or (ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements to protect the goods and to ensure assessment of the lowest applicable transportation charge; (2) (i) Order specified carrier equipment when requested by the Government; or (ii) If not specified, order appropriate carrier equipment not in excess of capacity to accommodate shipment; (3) Deliver the shipment in good order and condition to the carrier, and load, stow, trim, block, and/or brace carload or truckload shipment (when loaded by the Contractor) on or in the carrier's conveyance as required by carrier rules and regulations; (4) Be responsible for any loss of and/or damage to the goods-- (i) Occurring before delivery to the carrier; (ii) Resulting from improper packing or marking; or (iii) Resulting from improper loading, stowing, trimming, blocking, and/or bracing of the shipment, if loaded by the Contractor on or in the carrier's conveyance; (5) Prepare a commercial bill of lading or other transportation receipt. The bill of lading shall show-- (i) A description of the shipment in terms of the governing freight classification or tariff (or Government rate tender) under which lowest freight rates are applicable; (ii) The seals affixed to the conveyance with their serial numbers or other identification; (iii) Lengths and capacities of cars or trucks ordered and furnished; (iv) Other pertinent information required to effect prompt delivery to the consignee, including name, delivery address, postal address and ZIP code of consignee, routing, etc.; (v) Special instructions or annotations requested by the ordering agency for commercial bills of lading; e.g., (A) "to be converted to a Government bill of lading," or (B) "this shipment is the property of, and the freight charges paid to the carrier(s) will be reimbursed by, the Government"; and (vi) The signature of the carrier's agent and the date the shipment is received by the carrier; (6) Distribute the copies of the bill of lading, or other transportation receipts, as directed by the ordering agency; and (7) Prepay all freight charges to the extent specified in the contract. (c) These Contractor responsibilities are specified for performance at the plant or plants at which these supplies are to be finally inspected and accepted, unless the facilities for shipment by carrier's equipment are not available at the Contractor's plant, in which case the responsibilities shall be performed f.o.b. the point or points in the same or nearest city where the specified carrier's facilities are available; subject, however, to the following qualifications: (1) If the Contractor's shipping plant is located in the State of Alaska or Hawaii, the Contractor shall deliver the supplies listed for shipment outside Alaska or Hawaii to the port of loading in Alaska or Hawaii, respectively, as specified in the contract, at Contractor's expense, and to that extent the contract shall be "f.o.b. destination." (2) Notwithstanding subparagraph (c)(1) of this clause, if the Contractor's shipping plant is located in the State of Hawaii, and the contract requires delivery to be made by container service, the Contractor shall deliver the supplies, at the Contractor's expense to the container yard in the same or nearest city where seavan container service is available.
- Place of Performance
- Address: GSA, FSS, 7FLC1-Y8, 819 Taylor St., Room 6A06; Fort Worth, TX
- Zip Code: 76102
- Country: USA
- Zip Code: 76102
- Record
- SN00931787-W 20051116/051114212124 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |