SPECIAL NOTICE
34 -- CNC LATHE
- Notice Date
- 4/15/2005
- Notice Type
- Special Notice
- NAICS
- 333512
— Machine Tool (Metal Cutting Types) Manufacturing
- Contracting Office
- DHS - Direct Reports, United States Coast Guard (USCG), Commanding Officer, USCG Engineering Logistics Center, 2401 Hawkins Point Road Building 31, Mail Stop 26, Baltimore, MD, 21226-5000
- ZIP Code
- 21226-5000
- Solicitation Number
- HSCG40-05-Q-60002
- Response Due
- 8/30/2005
- Description
- The U.S. Coast Guard Engineering Logistics Center has a requirement to procure one each CNC Horizontal Large Swing Shaft Lathe to be installed at the U.S. Coast Guard YARD. This lathe shall be used for the machining and remachining of propulsion shafts, controllable pitch propeller blades, etc. used by the U.S. Coast Guard, ranging from 9 feet in length to 23 feet in length, and from 2 inch diameter to 24 inch diameter. Lathe must be able to provide a minimum 66 inch chuck swing over the bed, and a minimum 50 inch swing over the cross slide to facilitate machining of the largest shafts as well as meet other specific physical, functional, and performance characteristics. Interested sources that can provide a lathe capable of handling this range of shaft sizes, etc., must meet the minimum salient physical, functional, and performance characteristics identified in the solicitation package. The Government shall accept a new lathe or a refurbished retrofitted lathe. Used, non-refurbished equipment shall NOT be accepted. The Contractor shall also be responsible for providing all labor and materials to construct a concrete lathe base to contain the proposed lathe as identified in Coast Guard specifications and drawings that shall be included with the solicitation package when released. In addition to providing a lathe and constructing a concrete base to support the lathe, the contractor shall be responsible for providing a 5-day training course to an estimated 12-15 individuals. Training shall take place at the U.S. Coast Guard Yard. The Contractor shall be required to submit a training plan with their quotation. The Coast Guard shall hold a Pre-Proposal Conference on April 26, 2005 at 9:30 AM EST. All parties interested in submitting a quotation in response to this solicitation must attend this Pre-Proposal Conference. Copies of the draft specifications and drawings are included as attachments to this notice. Request For Quotation Number HSCG40-05-Q-60002 shall be released within 45 calendar days from the date of the pre-proposal conference. Quotations shall NOT be accepted from any source not attending this scheduled conference. Offerors interested in attending this pre-proposal conference must contact Kelly Wyatt at 410-762-6472, or via email Kwyatt@elcbalt.uscg.mil, to gain access to the U.S. Coast Guard Yard.
- Record
- SN00788965-W 20050417/050415211544 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |