SOLICITATION NOTICE
28 -- 75' Ship Service Generator
- Notice Date
- 7/2/2004
- Notice Type
- Solicitation Notice
- NAICS
- 336999
— All Other Transportation Equipment Manufacturing
- Contracting Office
- DHS - Direct Reports, United States Coast Guard (USCG), Commanding Officer, USCG Engineering Logistics Center, 2401 Hawkins Point Road Building 31, Mail Stop 26, Baltimore, MD, 21226-5000
- ZIP Code
- 21226-5000
- Solicitation Number
- HSCG40-04-R-60041
- Response Due
- 9/7/2004
- Point of Contact
- Kathy Fields, Contracting Officer, Phone 410-762-6473, Fax 410-762-6270, - Sandra McKay, Contracting Officer, Phone 410-762-6476, Fax 410-762-6056,
- E-Mail Address
-
kfields@elcbalt.uscg.mil, smckay@elcbalt.uscg.mil
- Description
- The U. S. Coast Guard Engineering Logistics Center (ELC) has a requirement for replacement Ship Service Diesel Generators for the 75? WLC Class Coast Guard Cutters. Each (SSDG) shall be a non-reversible self-contained marine diesel with individually replaceable cylinder liners. The SSDG model shall be a current production model and shall meet the requirements of Coast Guard Specification Number P-300-0425 dated June 24, 2004. The SSDG shall be capable of operation under the environmental conditions described in 40 CFR 94.8. The SSDG shall be in accordance with COMDTIST M9000.6D. The SSDG shall be restricted to the following dimensional limits. The overall dimensions shall be: length less than or equal to 87?, measured from the front of the engine to the aft end on the generator. Width shall be less than or equal to 36? and the height shall be less than or equal to 50?. Each SSDG shall be rated at a minimum of 75 KW at full continuous load and must operate @ 10% overload for 2 hours. Engines shall be certified by the manufacturer to be in compliance with sec. 2.1 of 40 CFR 94.8 for emissions standards. Data for Provisioning (DFP) will also be required which includes drawings, commercial technical manuals, catalog data and product specification sheets, which form the minimum data to provision a system or piece of equipment. Examples of the DFP include, but are not limited to: certification data, name plate data, component characteristics data, commercial specification sheets, end item/component prices, manufacturers identification, part numbers, shelf life and special marking/operating requirements. An Engineering Documentation Package (EDP) is also required to be submitted with proposal consisting of as a minimum documents and data necessary for the Coast Guard engineers to integrate the Contractor?s equipment into the design of Coast Guard vessels. Examples of EDP include, but are not limited to: hard copy paper drawings, electronic drawing files, commercial catalog sheets, off the shelf tech pubs, photographs, etc. A list of required spare parts, training and warranty will also be required. The resultant contract is to be a requirements contract with a base and four option years. The estimated quantity for the base and 4 option years is a total of 20 each. Delivery will be F.O.B. destination to the U. S. Coast Guard Engineering Logistics Center, 2401 Hawkins Point Road, Baltimore, MD 21226. Delivery shall be approximately 8 weeks or sooner after receipt of Delivery Order. All responsible sources may submit an offer, which shall be considered by the agency. The solicitation will be posted on FedBizOps when issued. Contractors are encouraged to check FedBizOps on a regular basis for the solicitation and any amendments. See Numbered Note 12.
- Record
- SN00614523-W 20040704/040702211539 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |