Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF APRIL 23, 2004 FBO #0879
MODIFICATION

71 -- Student Desks BMT

Notice Date
3/19/2004
 
Notice Type
Modification
 
NAICS
423210 — Furniture Merchant Wholesalers
 
Contracting Office
Department of the Air Force, Air Education and Training Command, Lackland AFB - 37th Contracting Squadron, 1655 Selfridge Avenue, Lackland AFB, TX, 78236-5253
 
ZIP Code
78236-5253
 
Solicitation Number
FA3047-04-T-0017
 
Response Due
3/25/2004
 
Point of Contact
Justin Ailor, Contract Specialist, Phone 210-671-1769, Fax 210-671-5064,
 
E-Mail Address
justin.ailor@lackland.af.mil
 
Small Business Set-Aside
Total Small Business
 
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format is Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Issued as a Request for Quotations (RFQ). The reference number is FA3047-04-T-0017. This solicitation document and incorporated provisions are those in effect through Federal Acquisition Circular 2001-13. This is a 100% small business set-aside. The NAICS code is 423210. The size standard is 500 employees. The contractor shall provide the following items for CLIN 00001 in the quantity of (973) FOLDING TABLET ARM: Mounted at 6 degrees for reading and writing comfort. 12 1/2" wide X 15 1/4" long with fixed arm rest 4 5/16" X 8 1/2". High-pressure plastic laminate bonded to both sides of 9/16" resin core. Edges are shaped and stain lacquered to complement top. Extra strong mechanism. Self lubricated with graphite-impregnated phenolic washers. Desk will be made for RIGHT-HANDED user. FRAME: 1 1/8" 18 gauge carbon steel quadratic tubing, legs waged to 5/8" diameter. All joints are hand brazed around the complete parameter of tubing. TABLET ARM SUPPORT: 1 1/8" 16 gauge carbon steel, quadratic tubing, secured to rear of chair back and down to the leg base. Tube closures are black plastic with steel spring umbrella clips. CHAIR HEIGHT: From seat to floor will measure 18". COMPENSATING BACK: Positive stop, tamper proof, providing 8-degree self-adjustment for comfort of occupant. SEAT and BACK: Seats doubled contoured with full waterfall front, with deep radius back. UPHOLSTERY: NOT APPLICABLE BOOK RACK: 1/4" steel rods with 5/16" steel cross rods resistance welded to form an integral unit and permanently brazed to frame. GLIDES: Self-leveling 1 1/4" diameter steel base of file hardness, rubber mounted and fully nickel-plated. METAL FINISH: Powder Coat SEAT AND BACK COLORS: - Air Force Blue TABLET ARM TOP: Light Oak FRAME: Char-Dark (Black-Brown) PART #: 104ABAFTA, CLIN 0002 in the quantity of (88) FOLDING TABLET ARM: Mounted at 6 degrees for reading and writing comfort. 12 1/2" wide X 15 1/4" long with fixed arm rest 4 5/16" X 8 1/2". High-pressure plastic laminate bonded to both sides of 9/16" resin core. Edges are shaped and stain lacquered to complement top. Extra strong mechanism. Self lubricated with graphite-impregnated phenolic washers. Desk will be made for LEFT-HANDED user. FRAME: 1 1/8" 18 gauge carbon steel quadratic tubing, legs waged to 5/8" diameter. All joints are hand brazed around the complete parameter of tubing. TABLET ARM SUPPORT: 1 1/8" 16 gauge carbon steel, quadratic tubing, secured to rear of chair back and down to the leg base. Tube closures are black plastic with steel spring umbrella clips. CHAIR HEIGHT: From seat to floor will measure 18".COMPENSATING BACK: Positive stop, tamper proof, providing 8-degree self-adjustment for comfort of occupant. SEAT and BACK: Seats doubled contoured with full waterfall front, with deep radius back. UPHOLSTERY: NOT APPLICABLEBOOK RACK: 1/4" steel rods with 5/16" steel cross rods resistance welded to form an integral unit and permanently brazed to frame. GLIDES: Self-leveling 1 1/4" diameter steel base of file hardness, rubber mounted and fully nickel-plated. METAL FINISH: Powder Coat SEAT AND BACK COLORS: - Air Force Blue TABLET ARM TOP: Light Oak FRAME: Char-Dark (Black-Brown) PART #: 1004ABAFTA FOB point will be Destination to be delivered to: Bldg.1580, Lackland AFB, San Antonio, TX, 78236. The provision in FAR 52.212-1, Instructions to Offerors-Commercial items, is applicable to this solicitation. FAR 52.212-2, Evaluation-Commercial Items, is applicable to this solicitation and the blanks in section (a) are completed as follows: Techinical is the most important as far as meeting the specifications then price will be considered. Offerors shall include with their quotes, a completed copy of 52.212-3, Offeror Representations and Certifications--Commercial Items. Far 52.212-4, Contract Terms and Conditions--Commercial Items, 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercials Items, 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration, and DFARS 252.204-7004, Required Central Contractor Registration, are applicable to this acquisition. The full text of these clauses may be accessed electronically at the FARSITE or ARNET. Responses to this RFQ must be received via fax or e-mail by the stated response time at the 37th Contracting Squadron, 1655 Selfridge Ave., Lackland AFB, TX 78236-5286. Quotes should be marked with the reference number. Vendors not registered in the Central Contractor Registration (CCR) database prior to award will be ineligible for award. No written request for quote is available This folding tablet must fold up and down to the side to allow easy walking. All responsible sources may submit a quotation which shall be considered by this agency. Please submit to A1C Justin M. Ailor at 210-671-1769 (phone) 210-671-5064 (fax) or email at Justin.Ailor@lackland.af.mil. Below are pictures for examples, yet as seen above the fabric is not needed. All or equals will evaluated. Quotes will not be accepted after March 25, 2004 1630 CST THe entire metal frame is constructed form 1"square 18 guage steel tubing with back leg stability brace and self leveling glides. The under seat heavy duty metal bookrack si designed to allow entry form the bront and both sides. A rear backstop is provided so that books will not fall out behind the chair desk. Frame and bookrack finished with balck baked powder coat. Seat&Back: 1/4: thick plasti-glass is ergonomically contoured with a tiliting back that is 17"W x 10"D. Generous double-contoured seat is 17"W x 15"D with a waterfall front. Seat and back are boht attached without any exposed fasteners. Folding tablet Arm: The folding tablet arm is flush to the fixed arm rest when in upright position. The tablet arm consists of a 1"thick fixed armrest and the tablet arm that is 3/4: thick, 121/4" W x 15"D x 4" at arm rest iwth a 10" angle to finish at 9" long on interior side of arm. Tablet arm folds completely out of way hwen not in use. BOth the fixed armrest and the folding tablet arm are fabricated form thick particleboard thermally fused with laminate. All edges of both parts are covered with vinyl t-mold. The 1" armrest attaches to the arm support with two u-clamps without the use of spacers. The tablet arm is mounted on a cast aluminum pivot bracket with mating, formed metal brackets. Spring retention is provided to keep the tablet arm folded away when not in use. The folding tablet arm mechanism is attached to a wrap around tube welded to one side of the back upright and is supported by another tube welded to the chair desk frame beneath the seat. The location and angle cut of hte folding tablet arm allows a full sixteen inches of belly room while in use. NOTE: THIS NOTICE MAY HAVE POSTED ON WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (19-MAR-2004). IT ACTUALLY APPEARED OR REAPPEARED ON THE FEDBIZOPPS SYSTEM ON 21-APR-2004, BUT REAPPEARED IN THE FTP FEED FOR THIS POSTING DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
 
Web Link
Link to FedBizOpps document.
(http://www.eps.gov/spg/USAF/AETC/LackAFBCS/FA3047-04-T-0017/listing.html)
 
Place of Performance
Address: BLDG 10416 Lackland AFB TX
Zip Code: 78236
Country: US
 
Record
SN00570727-F 20040423/040421214523 (fbodaily.com)
 
Source
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.