SOLICITATION NOTICE
38 -- Runway Sweeper
- Notice Date
- 1/29/2004
- Notice Type
- Solicitation Notice
- Contracting Office
- Regional Contracting Office Far East, PSC Box 2000
- ZIP Code
- 96379-2000
- Solicitation Number
- M6740004T0267
- Response Due
- 2/23/2004
- Archive Date
- 3/24/2004
- Point of Contact
- Yuriko Kuwae 011-81-611-745-8610 Yuriko Kuwae / Purchasing Agent Phone: 011-81-611-745-8610 SSgt. Patsy Stefan / Contracting Officer Phone: 011-81-611-745-8145
- Description
- This is synopsis for commercial item: Runway Sweeper: Qty 1 each: The sweeper shall be an regenerative air type with broom assist pick-up head and leaf pressure bleeder, capable of sweeping streets, curbs and gutters, runways, taxiways, ramps and parking areas. The sweeper shall be mounted on a diesel powered, conventional cab/chassis. GENERAL SWEEPING WIDTH: Pick-up heady only: 87 inches (2210mmm), With 1 gutter broom: 110 inches (2795mm), With 2 gutter brooms: up to 142 inches (3606mmm). CAB/CHASSIS-CONVENTIONAL: GVW 29,000lbs (13,000kg) min, Frame 50,000-psi min, Engine Diesel, 175 HP min, Transmission Automatic, Alternator 100-amp min, Batteries (2) 12V; 1100 CCA, maintenance Free, Wheelbase 152 inches min, Fuel Tank 50 gal, Shared with Sweeper Engine, Tires (2-front, 4-rear), Tubeless 11Rx22.5 min Steering Integral Power assisted, with Dual 18 inch steering wheels Instrument s & Lights Full package as required, manufactures standard. Air Conditioned Cab Manufactures standard Front mounted Magnet Manufactures standard. CONTROLS: Inside cab (lighted): Pick-up head, gutter brooms, ignition and tachometer (aux engine), voltmeter, low water warning system (dust control), all safety light, hour meter, pressure bleeder. Outside cab: Dump SWEEPER AUXILIARY ENGINE, DIESEL: Displacement 76 cubic inches min, Horsepower 80@2,500 RPM (60kW) min, Oil Filter Spin on, full flow BLOWER, RUBBER LINED: Aluminum alloy high volume open face turbine Bearings: (2) sealed lifetime lube, anti-friction, Housing: Abrasion resistant, with replaceable liner, Driver: Heavy duty power band DUST SEPARATOR: Type: Cyclonic, multiphase, centrifugal separation Location: Axial to blower within hopper super structure, Particulate removal: Through skimmer slot into hopper Inspection: H inged door, opened from hopper exterior Housing: Abrasion resistant, with replaceable wear resistant liner. HOPPER: Capacity (volumetric): 7.3 cubic yards min, Capacity (useable): 6 cubic yards, Construction: Welded steel plate with integral stiffeners Dumping method: Hydraulic with raker bar PICK-UP HEAD: Function: Air blast and suction chamber Width: 87 inches, Suspension: 4 spring 2 drag links, Skids: Carbide, long life, Suction and Pressure hose: 14 inches diameter min, Pressure bleeder: Integral for leaf/light material pickup, Broom Assist Picl: Up Head (BAH) manufactures standard. GUTTER BROOMS, DUAL WITH REMOTE TILT: Drive: Constant speed on reversible hydraulic motor, Adjustment: Adjustable for down pressure, pattern and wear Down pressure: Automatically adjusts to requirements, Flexibility: All directions, integral anti-damage "swing away" relief valve, Safety: Floodli ghts and parabolic mirrors. DUST CONTROL SYSTEM: System of water spray nozzles for airborne dust suppression, Water pump: Electric diaphragm Reservoir: (Polyethylene) 220 gal min, Filter: 80 meshes in per line, Low water shut-off/Safety shut-off, low water warning light in cab coupled with liquid level sensor, Spray nozzles: Around pick-up head (4), Gutter brooms (each) 2, Hopper (inside) (1). HYDRAULIC SYSTEM: Operates gutter brooms, dump and pick-head, Pump drive: Gear driven from auxiliary engine, Pump Capacity: 8GPM min, with 80 mesh suction strainer, Reservoir: 25 gal min, Filter: 10 micron in per line. SPECIAL AND SAFETYREQURIEMENTS: Amber rear mounted flashing warning lights, Amber strobe light with limb guard Auxiliary engine shutdown system, Back-up alarm, Severe weather wiring, Suction inlet liner, Water fill hose and rack, Water level indicator, Rear 6 inch hand suc tion hose, Abrasion protection package, Overseas packaging, Hopper drain system, Tropical Rust proofing, Over pack Manuals, Marine Corps Marking. Desired delivery is 90 days after award date of contract The Government requires delivery to be made within 120 days after award date of contract. Delivery: FOB Destination: Garrison Mobile Equipment, MCB Camp S. D. Butler, Okinawa, Japan FPO AP 96373-5001. This procurement not a small business set-aside; any responsible source may submit an offer. Solicitation will be available on and after 05 Feb 2004. Requests for Quotation (RFQ) will be issued to all respondents to this synopsis. Solicitation requests and RFQ response offers can be faxed to 011816117450969, emailed to kuwaey.ja@mcbbutler.usmc.mil, or mailed the Regional Contracting Office, PSC 557 BOX 2000, FPO AP 96379-2000. Offers must be received no later than 4:00 PM, JST, 23 Feb 2004. Questions may be addressed to Yuriko Kuwae by email at: kuwaey.ja@mcbbutler.usmc.mil. All correspondences must include the solicitation number (M67400-04-T-0267); you full name, your company name, and telephone and fax numbers. All offers received shall be considered.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DON/USMC/M67400/M6740004T0267/listing.html)
- Record
- SN00512659-F 20040131/040129214834 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |