SOLICITATION NOTICE
36 -- VACUUM SYSTEM HARDWARE COMPONENTS - 1 LOT
- Notice Date
- 7/28/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- NASA/George C. Marshall Space Flight Center, Procurement Office, Marshall Space Flight Center, AL 35812
- ZIP Code
- 35812
- Solicitation Number
- 4200021253
- Response Due
- 8/18/2003
- Archive Date
- 7/28/2004
- Point of Contact
- Kellie D. Craig, Contracting Officer, Phone (256) 544-5906, Fax (256) 544-6062, Email Kellie.Craig@msfc.nasa.gov
- E-Mail Address
-
Email your questions to Kellie D. Craig
(Kellie.Craig@msfc.nasa.gov)
- Description
- This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ) for Vacuum System Hardware Components. Specification for PR 4200021253: Vacuum System Hardware Components Please note that this should be quoted as one ?lot? consisting of the entire set as outlined below. Since these are off the shelf components, a delivery date of 8-31-2003 should be expected. Description: Vacuum hardware components listed in attached specification. MDC Vacuum Products Corp. or equivalent required, listed per description and MDC Vacuum Products Corp Part number. Vacuum Hardware Components Specification (MDC Vacuum Products Corp Parts or Equivalent) Item# Qty Description MDC Part # 1 20 1-1/3" Conflat blank flange 110000 2 10 1-1/3" Conflat Seals 191000 3 10 1-1/3" Conflat socket head screws/nutplates 190094 4 10 1-1/3" Conflat socket head screws 1/2" long 190000 5 20 2-3/4" Conflat blank flange 110008 6 15 2-3/4" Conflat Seals 191147 7 10 2-3/4" Conflat Hex bolts/nutplates 190093 8 10 2-3/4" Conflat Hex bolts 7/8" long 190002 9 5 4-1/2" Conflat blank flange 110018 10 3 4-1/2" Conflat Seals 191009 11 5 4-1/2" Conflat Hex bolts/nutplates 190096 12 5 4-1/2" Conflat Hex bolts 1-1/4" long 190003 13 5 6" Conflat blank flange 110025 14 8 6" Conflat Seals 191013 15 8 6" Conflat Hex bolts/nutplates 190097 16 5 2-3/4" to 1-1/3" Conflat zero length reducer 150001 17 3 4-1/2" to 2-3/4" Conflat zero length reducer 150008 18 8 6" to 2-3/4" Conflat zero length reducer 150016 19 3 6" to 4-1/2" Conflat zero length reducer 150018 20 4 8" to 2-3/4" Conflat zero length reducer 150029 21 4 8" to 6" Conflat zero length reducer 150033 22 10 1-1/3" conflat half nipple 401000 23 12 2-3/4" Conflat half nipple 401002 24 2 4-1/2" Conflat half nipple 401004 25 4 6" Conflat half nipple 401006 26 2 8" Conflat half nipple 401008 27 4 1-1/3" Conflat full nipple 402000 28 8 2-3/4" Conflat full nipple 402002 29 5 6" Conflat full nipple 402006 30 5 2-3/4" to 1-1/3" Conflat Straight Tube (Nipple) reducer 402011 31 3 4-1/2" to 2-3/4" Conflat Straight Tube (Nipple) reducer 402013 32 4 6" to 2-3/4" Conflat Straight Tube (Nipple) reducer 402014 33 5 1-1/3" Conflat Elbow 403040 34 8 2-3/4" Conflat Elbow 403042 35 2 4-1/2" Conflat Elbow 403044 36 4 1-1/3" Conflat Flexible Couplings 400000 37 6 2-3/4" Conflat Flexible Couplings 400003 38 2 4-1/2" Conflat Flexible Couplings 400005 39 2 6" Conflat Flexible Couplings 400007 40 5 1-1/3" Conflat Tee 404000 41 10 2-3/4" Conflat tee 404002 42 2 4-1/2" Conflat Tee 404038 43 5 6" Conflat Tee 404040 44 3 1-1/3" Conflat Cross 405000 45 10 2-3/4" Conflat Cross 405002 46 2 4-1/2" Conflat Cross 405031 47 4 6" Conflat Cross 405033 48 40 KF NW16 centering Ring Assembly Viton/SS 710000 49 40 KF NW16 Clamp, hinged aluminum 701000 50 60 KF NW25 centering Ring Assembly Viton/SS 710001 51 60 KF NW25 Clamp, hinged aluminum 701001 52 20 KF NW40 centering Ring Assembly Viton/SS 710002 53 20 KF NW40 Clamp, hinged aluminum 701002 54 20 KF NW16 Blank Stainless Steel 712000 55 40 KF NW25 Blank Stainless Steel 712001 56 20 KF NW40 Blank Stainless Steel 712002 57 10 KF NW16 half nipple Stainless steel 1.5" long 720000 58 20 KF NW25 half nipple Stainless steel 2" long 720001 59 10 KF NW40 half nipple Stainless steel 2.5" long 720003 60 5 KF NW16 full nipple 721000 61 15 KF NW25 full nipple 721001 62 5 KF NW40 full nipple 721002 63 15 KF NW25 to NW16 nipple reducer 732000 64 8 KF NW40 to NW25 nipple reducer 732003 65 8 KF NW16 elbow 723000 66 20 KF NW25 elbow 723017 67 8 KF NW40 elbow 723002 68 5 KF NW16 tee 724000 69 15 KF NW25 tee 724001 70 5 KF NW40 tee 724002 71 5 KF NW16 4-way cross 725000 72 15 KF NW25 4-way cross 725001 73 5 KF NW40 4-way cross 725002 74 15 2-3/4" Conflat to KF NW25 Adapter 730002 75 5 KF NW25 to 1/4" VCR Male 414056 76 5 KF NW25 to 1/2" VCR Male 414059 77 5 Conflat 2-3/4" to 1/4" VCR Male 414007 78 5 Conflat 2-3/4" to 1/2" VCR Male 414009 79 5 KF NW25 to 1/4" Swagelok 414013 80 6 Gate Valve 2-3/4" Conflat flanges, manual, UNF, metal seal bonnet 302001 81 7 Angle Valve 2-3/4" Conflat flanges, manual, metal seal bonnet 312029 82 5 KF NW25 roughing line, unbraided, medium wall, 18" long 441109 83 5 KF NW25 roughing line, unbraided, medium wall, 24" long 441111 84 5 KF NW25 roughing line, unbraided, medium wall, 36" long 441113 85 2 2-3/4" Conflat roughing line, unbraided, medium wall, 18" long 441018 86 2 2-3/4" Conflat roughing line, unbraided, medium wall, 24" long 441024 87 4 Apiezon vacuum grease, type L, vapor press 8x10-11torr 432032 The provisions and clauses in 4200021253 are those in effect through FAC 01-15 This procurement is a total small business set-aside. See Note 1. The NAICS Code and the small business size standard for this procurement are 332911 and 500 Employees respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to George C. Marshall Space Flight Center, Marshall Space Flight Center, AL 35812 is required within Ten (10) days ARO. Delivery shall be FOB Destination. Offers for the items(s) described above are due by August 18, 2003 by 10:00 C.S.T. to George C. Marshall Space Flight Center, ATTN: Procurement Center, PS53/K. Craig, MSFC, AL 35812 and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://server-mpo.arc.nasa.gov/Services/Proc/home.tme Offerors shall provide the information required by FAR 52.212-1 (Oct 2002), Instructions to Offerors-Commercial, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (Feb 2002), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (June 2003), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37 The FAR may be obtained via the Internet at URL: http://www.arnet.gov/far/ The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing (e-mail or fax) to Kellie.D.Craig@nasa.gov not later than August 11, 2003. Telephone questions will not be accepted. Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items with their offer. These may be obtained via the internet at URL: http://ec.msfc.nasa.gov/msfc/pub/reps_certs/sats/. These representations and certifications will be incorporated by reference in any resultant contract. [OMBUDSMAN STATEMENT IS REQUIRED] An ombudsman has been appointed -- See NASA Specific Note "B". Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin=62 . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any). Any referenced notes may be viewed at the following URLs linked below.
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=62#106808)
- Record
- SN00384913-W 20030730/030728213856 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |